REPAIRS TO FLOORING INTERNAL WATER SUPPLYLINES REPAIRS TO JOINERIES AND INTERNAL ELECTRIFICATION OF MES INSTALLATIONS MES OFFICE AND TEMPORARY BUILDINGS AT INS RAJALI NAS ARAKKONAM

Amount

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in levelling course over sub base complete all as specified and as directed..

Dismantling of wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 350 x 250mm x7mm/450 X 350 X 7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10mm thick plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in dado complete all as specified and as directed..

M&L Light Shade Vitrified ceramic tiles10 mm thick (square/rectangular)polished area of each tile not exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick Screed bed with CM 1:6 complete all as specified and as directed

All as per Item no.5 but in vertical surfaces such as skirtings, dados etc.,including rendering10mm thick plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in Skirting

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in Skirting, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including rendering 10mm thick of cement mortar 1:4 complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM 1:6 ccomplete all as specified and as directed.

Demolition of stone slabs and tiles of any description or any thickness in floors, skirtings, risers etc laid ,bedded and pointed in any mortar complete all as specified and as directed

M & L for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M & L for Machine cut kota stone slab 20-25mm thick in skirting over 15mm cement screed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry in floors and pointed with white cement with admixture of pigment to match the shade of granite stone laid & jointed over and including 20mm cement screed in CM 1:6 complete all as specified and as directed

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in Skirting for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

M & L for treating the surface with beeswax polish on marble/ granite/Kota stone/ stone work where ever required to complete all as specified and as directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M & L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed .

S & F of size of grid 605 x 605mm Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

M & L for Providing and fixing 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed.

M & L for applying one coats of Oil bound distemper over one coat of primer on False Ceiling complete all as specified and as directed .

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed .

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed .

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and as directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm & n.exc.2 Sqm each complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description not exceeding not exc 1 sqm each complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description not exceeding exc 1 sqm but n exc 2 sqm each

S&F second class hard wood plain , solid , straight , chowkats and frames wrought , framed rebated on the soilid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated complete all as specified and as directed .

S&F 30 mm thick second class hard wood , glazed and skelton shutters open rebated and prepared to receive glass, guaze etc (with sash bar) fitted with cut and mitred breads for securing glass etc stiles and rails, size at members of shutters as specified in SSR Pt-I sec 8, clause 8.24 (a) omplete all as specified and as directed .

S&F 30 mm thick second class hard wood , glazed and skelton shutters open rebated and prepared to receive glass, guaze etc (with sash bar) fitted with cut and mitred breads for securing glass etc stiles and rails, size at members of shutters as specified in SSR Pt-I sec 8, clause 8.20 (b) complete all as specified and as directed.

Supply & fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm, wood grain printed PVC sheet used instead of Plain colour PVC sheet & edge reinforced with M.S. Square tube will be painted to match with printed sheet complete all as specified and as directed.

Supply & Fix Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face as per specification complete all as specified and as directed.

M&L 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with screws with nails exc13 sqcm but n exc 25 sqcm complete all as specified and as directed.

M & L Cup boards stuttters made with 19 mm thick prelaminated particle board with decorative lamination on one side and other side balancing white lamination medium density, interior grade, including 6 mm teak wood lipping complete all as specified and as directed

S&F in repairs 18/19 mm thick prelaminated particle board , interior grade, prelaminated one side with decorative choice lamination and otehr side balancing wihte lamination, fixed with screws to timber frame work as in cup board shelves complete all as specified and as directed.

S & F of continous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 30mm complete all as specified and as directed

S & F powder coated aluminium frame for doors , windows etc with one or more rebates including necessary joining cleats (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S & F powder coated anodised sliding/hung type aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

S & F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and as directed.

M&L Providing PCC Type B1 1:2:4 (20mm graded aggregate) in as in hold fast fixing complete all as specified and as directed

S&F 125 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed

S&F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed .

S & F in repairs 125mm long medium weight cold rolled mild steel but hinges all as complete all as specified and as directed

S & F in repairs 75mm long medium weight cold rolled mild steel but hinges all as complete all as specified and as directed

S & F Aluminium anodised barrel tower bolt all as above but 150mm long complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt all as above but 125mm long complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt all as above but 100mm long complete all as specified and as directed.

S & F in repairs Aluminium anodised barrel tower bolt all as above but 150mm long complete all as specified and as directed

S & F in repairs Aluminium anodised barrel tower bolt all as above but 100mm long cmplete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and as directed .

S&F extruded aluminium alloy handles fabricated types, anodised, each 125mm long complete all as specified and as directed .

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 100mm long complete all as specified and as directed .

S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section complete all as specified and as directed

S&F in repairs aluminium alloy anodized sliding door bolt 300mm long with fixing clips etc complete all as specified and as directed.

S&F aluminium anodized hooks and eye 150mm long complete all as specified and as directed .

S & F of Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed .

S&F in repairs Door closer hydraulically of (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed

S & F 4mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane complete all as specified and as directed .

S & F 4mm thick sheet glass, pinheaded type ordinary quality, in squares n.exc 0.5 sq.m each pane complete all as specified and directed.

S & F Aluminium XPM alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed .

S & F in repairs Aluminium XPM alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S & F in repairs locks, cupboard, grade I, size 50 mm with 2 levers complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed

S & F framed worked such as grills, grating, etc with ends of bars shoulders and/or rivited or forged into spikes, framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed .

M&L preparation of new steel surfaces of any descriptions over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed .

M & L Preparation of old painted Steel surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying One coats of Synthetic Enamel paint complete all as specified and as directed .

M & L Preparation of old painted Steel surfaces of any description, not exceeding 10 cm width or girth, when unconnected with other painting or when painted in different tint and applying One coats of Synthetic Enamel paint complete all as specified and as directed

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L brick work with modular flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and as directed complete all as specified and as directed..

M & L brick work with modular flyash bricks straight or curved on plan exc 6 m mean radiusin half brick thick walls built in CM 1 : 6 complete all as specified and as directed.

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L Rendering for 10mm thick in cement mortar (1:6) on other than fair faces of internal bricks or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair Complete all as specified and s directed.

M&L for preparing newly plastered surfaces and applying two coats of oil bound distemper Emulsion emulsion over coat of primer on surfaces of walls including two coats of Bison putty on walls complete all as specified and as directed.

`M &L applying two coat of cement based paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface complete all as specified and as directed.

M & L Preparing newly plastered surfaces of Walls and applying three coats of white wash complete all as specified and as directed.

M & L complete removal of existing treatment and preparation on walls and applying two coat of oil bound distemper Emulsion over one coat of Primer over two coats of Bison putty on walls complete all as specified and as directed.

M & L Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L Preparation of old decorated/ plastered or unplastered wall surfaces any applying one coat of cement base paint complete all as specified and directed.

Material & Labour complete removal & prepartion of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) by using smart paint technique complete all as specified and as directed.

Taking up or down steel tubing 20mm dia bore and connection complete all as specified and as directed.

Taking up or down steel tubing 25mm dia bore and connection complete all as specified and as directed.

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 20mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 25mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

S & F of Brass Elbow (3/4 X ½) complete all as specified and as directed

S & F of 20mm Brass Tee complete all as specified and as directed

S & F of 25mm Male Brass Threaded Adaptor (MTA/ MBTA) ) complete all as specified and directed

S & F of 25mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed .

S & F of 25mm Union complete all as specified and directed

S & F of 25mm dia CPVC ball valve complete all as specified and as directed.

S&F GI tubing medium grade 20mm bore with all fitting and fixing complete all wall, or laid in floor complete all as specified and directed

S&F GI tubing medium grade 25mm bore with all fitting and fixing complete all wall, or laid in floor complete all as specified and directed

Taking down rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc copmlete all as specified and directed

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F for 75mm dia bore PVC (SWR) bends any radius complete all as specified and directed

S&F for 110mm dia bore PVC (SWR) bends any radius complete all as specified and directed

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding , low level flushing cistern and Flush pipe of 32mm dia but including seat cover) complete all as specified and as directed.

S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified and as directed.

S&F in repair vitreous china, wash hand basin white flat back size 550 x 400 mm white complete waste, chain and pug and precelain stopper including bracket complete all as specified and as directed.

S&F in repair of Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

Supply & fixing in repairs fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe complete all as specified and as directed.

Supply & fixing only 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and complete all as specified and as directed.

Supply & fixing in repairs only 40mm waste fittings brass of chromium plated for Sink etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and complete all as specified and as directed.

S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and as directed.

S & F in repairs 125 mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed

S & F in repairs flexible PVC waste pipe 32/40mm suitable for wash hand basin and Kitchen Sink complete all as specified and as directed

S & F PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Angle valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair aluminium anodised tubular rail 20mm dia D type 60cm long between flanges including per pair brackets for each towel rail complete all as specified and as directed.

S & F in repairs 20mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S & F in repairs 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&Fin repairs plastic water closet seat cover, black,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed

S&F in repair for syphonic action rod (complete kit) with float valve for low level cistern and make serviceable in all respect complete all as specified and directed

Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps/ pillar taps/ mixers/ stop cocks etc. by tightening and providing washer, repair to float valves, low leveled cistern by mixture adjustments, leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engneer In Charge. Note : (i) Replacement of fittings and fixture like Bib tap, stop cock, Pillar Tap etc. if required shall be measured and paid separately.

Supply and Fixing in repairs of 300mm Fiber corner shelf complete all as specified and as directed.

S & F Stainless steel Plate rack of size 780mm x 910 x 250mm (31"x36"x10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI-304 and fixed in repairs complete all as specified and as directed .

Supply and fix cabinet mirror of size 335x140x430mm with approved colour complete including necessary fixing arrangements and taking down the old mirror and taken as credit complete all as specified and as directed.

Supply and Fix in repair for stainless steel sink 1mm thick made of stainless steel for kitchen or laboratory with plugs, washers and wastes; including 40mm waste coupling , bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 600mm x 450mm bowl size 510mm x 330mm x 230mm complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs 20mm bore dia of Ball valves, high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed (Miniumum weight 210gms) complete all as specified and as directed.

S&F in repairs 25mm bore dia of Ball valves, high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed (Miniumum weight 455gms) complete all as specified and as directed .

S & F in repairs stainless steel grating doom 100mm dia complete all as specified and as directed

S&F Stainless Steel pipe 25mm dia curtain Rod for windows, doors Opening etc complete all as specified and as directed.

S & F Stainless steel Curtain Bracket ( L type) for fixing curtain rod complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 250 litres and not exceeding 500 litres complete all as specified and as directed.

S&F in repairs of PVC water tank 500 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling the same complete all as specified and as directed.

S&F in repairs of PVC water tank 1000 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling the same complete all as specified and as directed

Removing plants/herbs grown on walls/junctions with roots using herbicide chemicals and of existing brick and concrete in high raised building at any storeyed and making good the disturbed surfaces as per existing complete all as specified and directed.

M & L for Clearing the blockage in the water closets of any type completly preferably by manually means to enable the flush water to flow freely to the manholes complete all as specified and directed

M&L for clearing the blockage of WHB, bottle trap, urinal, sink etc by manually/mechanically and removing blockage from entire system and making it fully functiona all as specified and directed

M & L for 75 mm thick cement concrete type C-1 1:3:6 using 20mm graded aggregate as in plinth protection complete all as specified and as directed

M & L for 100 mm thick Plain Cement concret of type B1, 1:2:4 (20 mm graded aggregate) in Flooring/Pavement and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate ) in Flooring and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

S&F for steel window with side hung shutter including box type hinges steel handle and steel peg stay complete with glazing bars devotailedcomplete all as specified and as directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, devotailed or welded complete all as specified and as directed.

Repairs to steel windows /doors by using welding machine where necessary thicknesss of each welding spot exc 6mm but not exc 9mm complete all as specified and as directed.

S & F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing confirming to Fe 410 -W (Gde E- 250) complete all as specified and as directed.

M & L Preparation of new painted Steel surfaces of any description, not exceeding 10 cm width or girth, when unconnected with other painting or when painted in different tint and applying One coats of Synthetic Enamel paint complete all as specified and as directed.

M & L Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of whitewash complete all as specified and directed.

Repair and servicing of rolling shutters and removing of worn out components such as hood covers, laths ball bearing , helical wire springs, lock plates, brackets plate, shaft rod, straightening of existing guide channels, gear boxes, lath, hood at required places including greasing and refixing in the same opening after repairing, complete all as specified and directed. Note:- Spare parts shall be measured and paid separately under respective item.

Supply only interlocking lath sections, from mild steel strips 1.25 mm thick, the section of lath shall be continuous and shall be in single piece without any welded joints and each alternate lath section shall be fitted with malleable cast iron or mild steel clips screwed / riveted at either ends complete all as specified and as directed.

Supply only ' D' helical wire spring 450 mm long 'O' gauge complete all as specified and as directed.

Supply and fix mild steel hood covers of 1.00mm thick bent to shape to match with the existing trackers including stiffeners with MS flat iron and preparation of steel surfaces and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed

Supply only mild steel medium grade shaft pipe of 40 mm dia as required for rolling shutter shaft complete all as specified and as directed.

Supply only mild steel medium grade shaft pipe of 50 mm dia as required for rolling shutter complete all as specified and as directed.

Supply only ball bearing suitable for 50 mm dia of approved make complete all as specified and as directed.

Supply only ball bearing suitable for 65 mm dia of approved make complete all as specified and as directed.

Taking up or down steel tubing 15mm dia bore and connection complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) branch piece, single (Single 'Y') equal or unequal with access door complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F in repairs of Vitreous China squatting pan of pattern “long pan”, size 630 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern but including flush pipe) and making good to floor complete all as specified and as directed.

S&F in repairs stop cock concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed.

S & F in repairs Gun metal 20 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed complete all as specified and as directed.

S & F in repairs Gun metal 25 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 500 litres and not exceeding 1000 litres complete all as specified and as directed.

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc complete all as specified and as directed .

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- .

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One Exhaust fan point controlled by one switch.

(d) One 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size.

All as per item ser no-176.00 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC casing & caping/fixed on wall/roof/ceiling etc of size not less than 20 mm dia including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :-

(a) One light point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size.

All as per item ser no-149.00 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.

S&F in repair for switch piano, flush type single pole , one way 5 amp complete all as specified and as directed

S&F in repair for switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed

S&F in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed

S&F in repair for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed.

S&F in repair for Lamp holder angular/batten type, PVC/ polycarbonate type with back plate complete all as specified and as directed.

S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc and including taking down old complete all as specified and as directed

Supply and fixing in repair of modular switch one way 5/6 A white Active one module complete all as specified and as directed

Supply and fixing in repair of modular switch socket combination 16 A, 6 pin 3 module flush type Active white two module complete all as specified and as directed

Supply and fixing in repair of modular switch socket combination 5 Amp, 5 pin flush type Active white three module complete all as specified and as directed

Supply and fixing in repair of socket 2M 6A-2/3 pin combined Active white complete all as specified and as directed

Supply and fixing in repair of modular fan step regulator,120 W-2 module complete all as specified and as directed

Supply and fixing in repair modular bell push 6 A one module complete all as specified and as directed.

Supply and fix high efficiency wall mounted T 8 LED batten light fitting 4 ft and including taking down old unserviceable fittings complete all as specified and as directed.

Supply and fix high efficiency wall mounted LED batten type polycarbonate tube not less than18W 4 ft LED light fitting and including taking down old unserviceable fittings complete all as specified and as directed.

Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP66 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged complete all as specified and as directed.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed

Supply and fix for Buzzer, Ding Dong AC, 230 volts, single pole complete all as specified and directed

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed

S& F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20-32 Amps complete all as specified and directed

Green Ray Technologies (BID ID -3066540)