Renovation of Maternity Ward of Civil Hospital at Hisar

Amount

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. (HSR 6.6)

Cement concrete 1 : 8 : 16 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.28)

Cement concrete 1: 2 : 4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41)

Providing and laying 60mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 25mm thick fine sand complete in all respect.(HSR 10.158)

Fixed portion (Anodised aluminium transparent or dyed to required shade according to IS;1868,minimum anodic coating of grade AC 15) II) Add Rs.20/- Per Kg. extra if Polyester powder coating of 50 micron is done instead of anodizing in above item No. 9 & 10. (HSR 17.95 + note II)

Shutters of doors, windows & ventilators including providing and fixing hinges aluminium fitting i.e. aluminium kun II) Add Rs.20/- Per Kg. extra if Polyester powder coating of 50 micron is done instead of anodizing in above item No. 9 & 10. (HSR 17.96 + note II)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS; 12823 grage 1 type II in panelling fixed in aluminium doors. Windows shutters and partition frames With C.P. brass /stainless steel screws etc. complete. (b) Pre-laminated particle board with decorative lamination on both sides.(HSR 17.97 b)

Providing and fixing glazing in aluminium door, windows ,ventilator shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). (b) With float Glass panes of 5.00 mm thickness. (HSR 17.98 b)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS;6315 single piece M.S. sheet outer box (b) With Brass cover plate. (HSR 17.99 b)

Providing, Fixing aluminium round shape handle of uter dia 100mm with screw etc. complete (HSR 17.102) (ii) poweder coated minimum thickness 50 micron aluminium.

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

Providing and fixing of 0.5 mm thick colour coated profile sheet roofing including all accessories.

M/s Goondli Construction

JSR ENTERPRENEURS

Pardeep Kumar

Parmod Jangra Contractor