Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹49.7 L
EMD Value
₹99,400
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE SEABIRD KARWAR
GARRISON ENGINEER (SEABIRD) KARWAR Naval Base, Sankrubagh (PO) Karwar - 581308
INSTALLATION OF PANEL BOARD AT SPB (KAR) PREMISES TO DOMESTIC AND INDUSTRIAL POWER SUPPLY AND SPECIAL REPAIRS FOR REPLACEMENT OF LOW PRESSURE TRADE WASTE PUMPS (LPTW) IN SERVICE TUNNEL AT VARIOUS LOCATIONS AT NSRY (KAR)
2026_MES_798196_1
8580/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (SB) KARWAR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (SB) KARWAR
₹99,400
Yes
16 Nov 2026
16 Nov 2026
9 Dec 2026
16 Nov 2026
7 Dec 2026
30 Nov 2026
16 Nov 2026 - 23 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for taking down (lifting/lowering) low pressure trade waste water pump capacity upto 5 HP, from tunnel (pier-1) depth upto 5 mtr including column pipe and cable after disconnecting, dismantling, repairing, transporting to workshop (to and fro) from the site and reassembling, testing and reinstalling at site complete all as specified and directed by Engr-in-Charge. | 13 | Each | 1.25 | ₹16.25 |
| 2 | M&L for dismantling of low pressure trade waste water pump capacity upto 5 HP, from tunnel (pier-1) depth upto 5 mtr cast iron body, cutting and removal of existing burnt winding, cleaning of stator slots, and rewinding with super enamelled copper wire of suitable size and rating, having Class F/H insulation. Reassembling motor with proper alignment, and testing for insulation resistance (megger test), continuity, no-load complete all as specified and directed by Engr-in-Charge. | 13 | Each | - | - |
| 3 | S&F high quality insulation materials including sleeves, slot liners, varnish and heat treatment suitable for Low pressure trade waste water pump capacity upto 5 HP, from tunnel (pier-1) depth upto 5 mtr complete all as specified and directed by Engr-in-Charge. | 13 | Set | 10 | ₹130 |
| 4 | Supply & replacement of heavy duty bearings (SKF/FAG/NSK) including greasing of Low pressure trade waste water pump capacity upto 5 HP, from tunnel (pier-1) depth upto 5 mtr complete all as specified and directed by Engr-in-Charge. | 13 | Set | 10 | ₹130 |
| 5 | S&F mechanical seal (carbon/ceramic/SiC) including leak testing of Low pressure trade waste water pump capacity upto 5 HP, from tunnel (pier-1) depth upto 5 mtr complete all as specified and directed by Engr-in-Charge. | 13 | Set | 11 | ₹143 |
| 6 | Supply & replacement of non-clog/vortex impeller (CI/SS/GM) dynamically balanced for Low pressure trade waste water pump capacity upto 5 HP, from tunnel (pier-1) depth upto 5 mtr complete all as specified and directed by Engr-in-Charge. | 13 | Each | 12 | ₹156 |
| 7 | Supply and replacement of stainless steel pump shaft of suitable diameter and length suitable for Low pressure trade waste water pump capacity upto 5 HP, discharge 1.5 lit/sec, head 5mtr, RPM 2900, manufactured from approved quality stainless steel, accurately machined, including keyway cutting, threading, polishing and fitting in position, complete with proper alignment, coupling with motor and testing, complete in all respects of make -M/s MBH Pumps, Model No: SSF 10/22. | 13 | Each | 13 | ₹169 |
| 8 | Supply & replacement of pump casing/volute with proper sealing for Low pressure trade waste water pump capacity upto 5 HP, from tunnel (pier-1) depth upto 5 mtr complete all as specified and directed by Engr-in-Charge. | 13 | Each | 14 | ₹182 |
| 9 | Supply and laying of 3 core 4 sqmm flat type submersible cable, including taking down with multistrand copper conductors, PVC insulated and overall PVC sheathed, suitable for 1100V grade, conforming to IS 694 / IS 1554. The cable shall be resistant to moisture, oil and abrasion, suitable for submersible pump application. The work includes laying of cable through conduit/along wall/shaft, proper dressing, fixing with clamps/saddles, making necessary connections at both ends, including glanding, crimping with copper lugs, insulation with tape/sleeves, and testing for continuity and insulation resistance, complete all as specified and directed by Engr-in-Charge. | 800 | Running Metre | 15 | ₹12,000 |
| 10 | Supply and laying of 3 core 10sqmm flat type submersible cable, including taking down with multistrand copper conductors, PVC insulated and overall PVC sheathed, suitable for 1100V grade, conforming to IS 694 / IS 1554. The cable shall be resistant to moisture, oil and abrasion, suitable for submersible pump application. The work includes laying of cable through conduit/along wall/shaft, proper dressing, fixing with clamps/saddles, making necessary connections at both ends, including glanding, crimping with copper lugs, insulation with tape/sleeves, and testing for continuity and insulation resistance, complete all as specified and directed by Engr-in-Charge. | 400 | Running Metre | 16 | ₹6,400 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
Tender8580.pdf
Tender Documents • 0.96 MB
BOQ_895672.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .