NCTPS II MI Circle Common Auxiliaries Division Electrical work Preventive Breakdown maintenance

Charges for disconnection of cables, dismantling of motor, inspection of winding & bearings, replacement of bearings and varnishing of stator windings if required, reassembling of motor, Alignment & Coupling of motor with pump/Agitator, Testing and Re-commissioning of LT motor above 3 KW below 30 KW including cost of consumables, Hire charges for T&P, lead & lift etc.

Charges for disconnection of cables, dismantling of motor, inspection of winding & bearings, replacement of bearings and varnishing of stator windings if required, reassembling of motor, Alignment & Coupling of motor with pump, Testing and commissioning of LT motor 30 KW & upto 90 KW including cost of consumables, Hire charges for T&P, lead & lift etc.

Charges for dismantling of cooling water pump motor by opening and closing power cable terminal box cover and disconnection & connection of all power cable and control cables( HT cable,space heater cable, C & I cable etc,) decoupling of motor, dismantling of motor from motor stool, removal of motor side end coupling,removal of motor stool, placing at repair bay by using sleeper wood, re-erection & re-commissioning of motor.

Charges for dismantling of Non-Drive end bearing by removing top cover, fan etc., thorough cleaning / replacing if required,greasing ,re-erection of the vertical type HT motors of rating 1.8MW including lead,lift,consumables and T&Ps

Charges for dismantling of Drive end bearing by removing motor end pully (by heating the end pully if required) ,tilting the motor assy,removing the bearing cover,etc., thorough cleaning / replacing if required,greasing ,re-erection of the vertical type HT motors of rating 1.8MW including lead,lift,consumables and T&Ps.

Rewinding of 50HP /37KW DM water Make up pump .Charges for rewinding,,recondition of bearings and alignment.

Charges for REWINDING OF 18.5 KW MOTOR,

Charges for REWINDING OF 22KW TO 30KW MOTOR,

Bracing work of winding take off leads from 22 KW to 55KW motors

Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings, providing sleeves in the end cover of one in LT motors upto 55KW including cost of consumables, Hire charges for T&P, lead & lift etc,.

Charges for rectification of damaged motor fan cover & terminal box by removing from motor, cutting, welding, drilling & tapping and replacement if required, and reassembling in motor after completion of LT motor upto 90 KW including cost of consumables, Hire charges for T&P, lead & lift etc,.

Charges for REWINDING OF 1.1 KW MOTOR

Charges for REWINDING OF 2.2 / 3.7KW MOTOR

Charges for REWINDING OF 7.5 KW MOTOR ( Crane motors)

Charges for REWINDING OF 45/50/55 KW MOTORS