UPGRADATION / IMPROVEMENT OF SECURITY

Amount

SCHEDULE A PART I (BUILDING WORKS)

Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part I .

Sch A Part II (INTERNAL ELECTRIFICATION)

Lump sum price worked out by the contractor for Internal electrification as listed in Sch ‘A’ Part II .

Sch A Part III (INTERNAL WATER SUPPLY )

Lump sum price worked out by the contractor for Internal water supply as listed in Sch ‘A’ Part III .

Sch A Part IV (EXTERNAL ELECTRIFICATION)

Lump sum price worked out by the contractor for External electrification as listed in Sch ‘A’ Part IV .

Sch A Part V (EXTERNAL WATER SUPPLY)

Lump sum price worked out by the contractor for External Water Supply as listed in Sch ‘A’ Part V.

Sch A Part VI (ROAD, PATH AND HARDSTANDING)

Lump sum price worked out by the contractor for Road, Path and hardstanding as listed in Sch ‘A’ Part VI.

Sch A Part VII( SEWAGE DISPOSAL)

Lump sum price worked out by the contractor for Sewage disposal as listed in Sch ‘A’ Part VII

Sch A Part VIII( AREA DRAINAGE)

Lump sum price worked out by the contractor for Area drainage as listed in Sch ‘A’ Part VIII

Sch A Part IX (SECURITY WALL, GATE AND FENCING )

Lump sum price worked out by the contractor for Security wall, gate & fencing as listed in Sch ‘A’ Part IX.

Sch A Part X (ADDL/ALTN OF E-4 BULDING)

Lump sum price worked out by the contractor for Addl/Altn of E4 building as listed in Sch ‘A’ Part X.

Sch A Part XI( DEMOLITION WORK)

Lump sum price worked out by the contractor for demolition work as listed in Sch ‘A’ Part XI

Sch A Part XII( PARKING SHED)

Lump sum price worked out by the contractor for parking shed as listed in Sch ‘A’ Part XII

Sch A Part XIII (SITE CLEARANCE)

Lump sum price worked out by the contractor for Site clearance as listed in Sch ‘A’ Part XIII

Sch A Part XIV (Miscellaneous Items of B/R and E/M)

M&L for 150 mm thick (spread thickness) granular sub base of broken boulder or quarried stone of size 40 mm to 63 mm laid in two layers of 75 mm thick each, interstices filled, surface formed, rolled & consolidated with power roller exc 8 tonne & not exceeding 12 tonne to a required gradient & camber etc complete all as specified & directed.

M&L for providing, laying, spreading & compacting graded stone aggregate water mix macadam (WMM) 150mm thick (compacted thickness) laid in 2 layers each of 75 mm thick (compacted thickness) using trap , basalt stone of maximum size 40 mm grading, rolled & compacted to required camber using 8 to 10 tonne power roller & tandem vibratory roller to achieve uniform smooth surface including necessary lateral support and form work etc complete all as specified and directed.

M&L for preparation of plastered surfaces of walls and applying two coats of exterior acrylic weather proof antifungal emulsion paint of approved brand in camouflage pattern and shade over a coat of alkali resistant primer all as per manufacturer’s instructions including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of old painted surfaces of walls and applying one coat of exterior acrylic weather proof antifungal emulsion paint of approved brand in camouflage pattern and shade all as per manufacturer’s instructions including necessary scaffolding etc complete all as specified and directed.

S&F concertina coil 600 mm dia (stretched position) hot dip galvanised including “U” and “C” clips, having 50 Nos of spirals in 6 mtr stretch length and composed of reinforced punched razor ribbon tape wire having continuous punched blade edge barbed on both sides of cold rolled low carbon steel fixing to the 'Y' of trapezoidal shaped angle iron brackets placed at 2 to 3 metre apart complete all as specified, shown in drawings and as directed. . The barbs should have 180 degree straightness, razor edge cut with following specifications: - (i) Concertina coil confirming to IS-513, IS-4454 {Part-I] and IS-12753 (ii) Clips - 18 SWG GI (iii) Wire dia - 2.60 mm (iv) Razor blade tape length - 20 mm (minimum) (v) Razor blade tape width - 14 mm (minimum) (vi) Razor blade thickness - 0.50 mm (vii) Clips per round of circle - 05 Nos (viii) Zinc coating - 230 to 240 GSM heavy coating hot dip (ix) Tensile strength- 1620 N/Sqmm (Minimum) Notes : [a] Horizontal razor wire and angle iron supports will be measured and paid separately under relevant items of Sch 'A'/BOQ [b] measurment will be made for stretched length

S&F Hot dip galvanised razor wire fencing with 2.60mm dia center core wire having barbs of length 20mm (Minimum), width 14mm(Minimum) and thickness 0.50mm razor strip on swan neck angle iron and fixing with antirust clamps on angle iron post including all fittings like fastener clips, steel leg rings etc.as shown in drawing complete all as specified and directed. The barbs should have 180 degree straightness, razor edge cut with following specifications: - (i) Razor wire confirming to IS-513, IS-4454 [Part-I] and IS-12753 (ii) Zinc coating - 230 to 240 GSM heavy coating hot dip (iii) Tensile strength- 1620 N/Sqmm (Minimum) Note : Each line of wire will be measured as one unit.

M&L for construction of Septic tank of 10 user capacity with brick masonry with old size bricks all as specified and shown on drawings including earth work in any type of soil 100 mm bore cast Iron inlet and outlet pipes upto 3 mtr from outer face of wall, including CI Tee, sluice valve chamber, RCC slab and precast RCC manhole covers, CI vent pipes etc complete all as all as shown on TD Drg No. TD/217 Sheet No. 1/2 & 2/2 & specified.

M&L for construction of soakage wells of size 1.8 M dia & 3 Metre effective depth including excavation, in any type of soil, foundation in PCC 1:3:6, Type C-2 (Using 40 mm graded stone aggregate) walls of honey combed masonry with top ring M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM 1:6, RCC cover slab in M-25 (Using 20 mm graded stone aggregate ) cover, interconnecting pipes of RCC complete filled with brick bats etc complete all as shown on TD Drg No. CELZ/TD/576 Sheet No. 1/2 & 2/2 & specified

S&F precast cement concrete factory made kerb stones of size 300 x 250 x 100 mm laid and set in cement mortar 1:4 complete all as specified and as directed. Note : (i) Grade of Concrete Mix shall not be less than M25 (ii) Kerb stones shall be tested in NABL approved laboratory for grade of concrete and test certificate shall be produced by the contractor before incorporation in the work.

M&L for Preparing the new bituminous surfaces by removing or cleaning of all dirt, scales, oil grease and foreign materials etc complete as per the direction of Engineer-in-Charge and providing 2.5mm (minimum) thick hot thermoplastic paint (Retro reflective type) for marking lines, dashes, arrows, letters, etc. on roads in white/yellow shade by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, gun, beads dispenser, propane tank, heaters and profile shoe, heater driven by skilled operator on road surfaces complete all as specified and directed by Garrison Engineer. Note:- (i) Road marking work shall be carried out in accordance with manufacturer’s instructions and as specified in particular specifications (ii) Refer MORTH specification of Para 803.4.2.1 and 800.4.2.2 on bituminous surface/surfaces in white colour or yellow colour and super imposed with glass beads confirming to BS 6088 and MORTH specification Para 803.4.3.3

S&F solar road stud LED based made of aluminium alloy shell minimum size 125 mm X 125 mm X 25 mm ( shank 60 mm ) with anti-twist and rib, 100% water proof according to IP-65 (CPRI tested) high efficiency mono-crystalline solar panel 2.4 V/ 0.3 watt, one Ni-Mh or Ni-cd rechargeable battery ( 1.2 V 1600 MA), siz super bright LEDs with 10000 to 18000 mcd (Millicandela) maintenance free. view distance upto 1000 meters, flash rate 2 Hz, bearable weight 10 Ton approximate complete all as specified & directed. Make:- Dark eye Model - DHRUV (or) techno commercially equivalent model/make as specified in Appendix 'A' (List of makes) to Particular Specifications.

S&F reflective road studs made out of tough polycarbonate and its reflective lense shall be made with polycarbonate micro prismatic reflective panel camber, red or white colour, two way reflective, electronically welded to the body of stud and overall size 100 mm x 100mm x 20mm, the lower surface of studs will be supported with two numbers nylon shanks each of length not less than 20mm and load bearing capacity not less than 20 tonne each and fixed with epoxy adhesive in road complete all as per manufactures instructions.Make : Dark eye Cat part No. DA52 (or) techno commercially equivalent model/make as specified in Appendix 'A' (List of makes) to Particular Specifications.

Taking down barbed wire or otherwise in fencing fixed to any type of standard rails, straining bolts etc complete all as specified & directed. Note:- Each line of wire shall be measured for payment

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings , ISI marked, including LED lamp 5 Watt, 230V AC, complete all as specified and directed.

S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminum body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make : Orient Electric (Cat No : LBLN-20-C-AL) , Halonix (Cat No : HLB-03-20-CW-AL) , Bajaj (Cat No : BCLSBAL 20W CW) as approved by GE

S & F Wall/surface mounted type LED light fitting batten type complete with LED lamp 5 W ( 1 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally prewired and including connecting up the twin core twisted flexible copper conductor cable complete all as specified and as directed. Make : Havells (Cat No : LHEXBYPNIN1W005) , Halonix (Cat No : HLB-07-05-CW) , Bajaj (Cat No : BCLSB05 WH) as approved by GE

S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x 10 watt , extruded aluminum body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make : Havells (Cat No : LHEXBTP7IN1W009) , Orient Electric (Cat No : LBLN-10-C-SQ) , Bajaj (Cat No : BCLSB10 WH) as approved by GE

S&F air ventilating fan 300 mm sweep, heavy duty, metallic body, AC single phase, 230 volts complete with louvers shutters and including PVC insulated 3 core 1.5 Sqmm copper cable from ceiling rose to exhaust fan complete including cutting the square / round hole of required size in wall, finishing to disturbed surface to match the adjoining surface complete all as specified & directed. Make : Orient/Crompton/Havells/Bajaj as approved by GE

S&F ceiling fan 1200mm sweep, BEE 5 Star rated, ceiling fan with brush less direct current (BLDC) motor, class of insulation: B, 3 Nos blades, 30 cm long down rod, 02 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM (tolerance as per IS : 374-2019 ), THD less than 10% and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more han 2 mega ohm, suitable for 230 V, 50 Hz single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable all as specified & directed. Make : Orient/Crompton/Havells/Bajaj as approved by GE

S&F LED security light fittings having ingress protection class minimum IP-65 suitable for road lightening luminaries with high power LED and maintenance free system for capacity 20 W complete with 32 mm bore light grade GI pipe bracket 1.5 mtr long duly bent to shape including 2 Nos M.S. flat ( 25 mm x 5 mm) clamps, nuts, bolts washers etc fix on wall complete all as specified & directed. Make:- Philips Cat Part No. BRP022LED20CW MRS1 PSU GR)/ Havells Cat part No. ENDURAPEARLSL20WLED757SASYTOPCMP / Bajaj Cat Part No. BCLST 20W LED I V2 as approved by GE.

S&F Integral 10 watts LED aviation light luminaries comprising of die cast aluminum housing with RED polycarbonate dome for better illumination operating voltage 100-270 Volt, AC, ingress protection IP-65, optical lenses for 360 degree illumination, mounted on 20 mm light grade GI pipe ( 3.0 mtr) fixed with proper by means of 02 Nos flat iron clamps of size 40 x 3 mm with nuts, bolts & washers etc including connecting with 2 core twisted flexible copper conductor cable complete all as specified & directed. Make : Philips/Havells/Crompton/Bajaj as approved by GE

S & F of wall mounted light fitting made up of polycarbonates/ Aluminium suitable for and including lamp LED 8/10 watt, fixed properly on wall surface and connecting complete all as specified & directed. Make : Havells (Cat No : LHEXBTP7IN1W009) , Orient Electric (Cat No : LBLN-10-C-SQ) , Bajaj (Cat No : BCLSB10 WH) as approved by GE

S & F of recess/surface type LED light fittings 36 watt ceiling panel (2 ft x 2 ft), extruded aluminium housing complete with electrical connection with copper wire complete all as specified & directed. Make: Halonix (Cat No : HLFPR22-02-36CW-IIILCTLRP-36-FO-CDL), Havells Cat No. PLUTONEO2X2PLR34WLED857S, Bajaj (Cat No : BZRSQL 36W GZi CW) as approved by GE.

S & F MCB SPN, 40 Amps, 240 volts, 'C' series, breaking capacity 10KA including providing thimble for out going cables, complete all as specified and directed.

S & F MCB SPN, 32 Amps, 240 volts, 'B' curve, with rupturing capacity 10KA including providing thimble for out going cables, complete all as specified and directed.

S & F MCB SP, 6 to 40 Amps, 240 volts, 'C' series, breaking capacity 10KA including providing thimble for out going cables, complete all as specified and directed.

S & F MCB SP, 6 to 32 Amps, 240 volts, 'B' curve with rupturing capacity 10KA including providing thimble for out going cables, complete all as specified and directed.

S & F MCB TPN, 63 Amps, 240 volts, 'C' series, breaking capacity 10KA including providing thimble for out going cables, complete all as specified and directed.

S & F MCB TPN 6 to 32 Amps, 415 volts, 'C' curve with rupturing capacity 10KA including providing thimble for out going cables, complete all as specified and directed.

S&F PVC Exhaust fan of 300 mm sweep , single phase 230 V AC , 900 RPM , including making hole & grouting in wall , mounting frame with nut, bolts, washers, fasteners , etc and connecting exhaust fan to ceiling rose including provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete all as specified & directed. Make :Orient / Crompton/ Havells/Bajaj as approved by GE

M&L for Sub main wiring with two runs of 2 x 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC concealed conduits heavy duty grade ISI marked 25mm dia (External) with conduit accessories and one run of single core PVC(green colour) insulated but unsheathed multi stranded copper conductor of size 1 x 4 Sqmm 1100 volts grade cable as earth continuity conductor complete all as specified and directed. Note: Two runs of 4 Sqmm , one run of 4 Sqmm earth conductor and one run of conduit shall be measured and paid as one metre length of unit.

M&L for Earthing complete with galvanized steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron wire 4 mm as Earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe medium grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/steel of size 75x75x 25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia round bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and directed.

S&F chromium plated urinal spreader of 15 mm bore fancy type screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed. Make : Jaquar/Cera/Hindware as approved by GE

S&F of chromium plated Jet spray with 1.00 mtr long chromium plated flexible tube complete all as specified & directed. Make : Jaquar/Cera/Hindware as approved by GE

S&F LED Flood light fitting 120 watt IP-66, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, individual LED with glass lenses complete suitable for highlighting architectural facade and general purpose lighting and making connection with suitable in size 3 core wire and suitable for mounting on GI /MS bracket complete all as specified and directed. Make :- Havells Cat Part No. JETAIRISFLS120WLED757SYMLTG/BAJAJ Cat Part No. BJFL 120W LED I /WIPRO Cat Part No.LF20-132-060-57-G2

S & F automatic street light of three phase IP 54 protection, switching controller panel of FR grade material for automatic & switching of street lights based on LUX level of Nature light having sensor, switch alongwith with suitable power contactor of rating 20 Amps 4 pole, MCB SP 20 Amps-03 Nos, complete including provision of making connection with suitable size of cable & testing complete all as specified and directed. Make : Philips/Havells/Crompton/Bajaj as approved by GE

S & F of 45W LED street light fitting with luminaire made up of pressure die cast aluminium housing with toughened glass and individual LED lenses complete and IP-65/66 protection ,making connection with suitable size of cable and suitable for mounted 32/40mm dia pipe as recommended by manufacturer , Complete all as specified and directed. Make : Orient Electric (Cat No : LSFS- 045-C) , Halonix (Cat No : HLSLD-14-45-CWL) , Bajaj (Cat No : BRTFG 45W LED) as approved by GE

S & F of LED street light 25 watts made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP65/66 protection , complete all as specified and directed. Make:- Havells (Cat Part No ENDURAPEARLSL25WLED757SASYTOPCMC) , Orient (Cat Part No. LSFS-25-CF-PC, Bajaj (Cat part No. BCLST25WLED as approved by GE.

S&F GI bracket made out of 40 mm bore GI pipe medium grade, ISI marked, 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed.

S&F of FRP/ SMC Junction box of approximate size 270 x 225 x 135mm , press moulded , front openable, side hinge complete with bakelite connector 4 Nos ,supported on FRP/DMC insulator , MCB SP 06 amps capacity with necessary fixing arrangements by providing MS clamps 1 Nos made out of MS flat 25x3 mm including nuts ,bolts and washers etc fixed with mechanical fasteners of size 250x200x100 mm suitable for 3 phase ,4 wire system including aluminium bus bar of 100 apms rating capacity complete all as specified and directed.

Supply and erection of steel tubular pole swaged type 410-SP- 31 (LT 9.00 mtr long pole) conforming to IS: 2713 factory pre red oxide prime red with MS welded base plate of size 33 mm x 300 mm x 6 mm thick finial taper plug, bolts nuts & washer and MS pole cap all as specified in & including following :- (a) Excavation for pole foundation & getting out in any type of , RFR and disposal of surplus soil to a distance not exceeding 50 mtrs. (b) M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete for padding of size 900mmx600mm x 150 mm cross section under pole foundation complete all as specified and directed. (c) M&L for providing PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete for pole of size 900mm x 600mm x 1500 mm complete all as specified and directed. (d) M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for coping of size 600mm X 600 mm X 300mm high above GL. (e) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coat of aluminum paint over a coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5mm above plinth block. (f) M&L for writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole complete all as specified and directed. (g) Painting of coping with cement base paint all as directed. Note : Manufacture's test certificate shall be produced before execution work.

Supply and erection of steel tubular pole swaged type 410-SP- 55 (HT 11.00 mtr long pole) conforming to IS: 2713 factory pre red oxide prime red with MS welded base plate of size 33 mm x 300 mm x 6 mm thick finial taper plug, bolts nuts & washer and MS pole cap all as specified in & including following :- (a) Excavation for pole foundation & getting out in any type of , RFR and disposal of surplus soil to a distance not exceeding 50 mtrs. (b) M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete for padding of size 900mmx600mm x 150 mm cross section under pole foundation complete all as specified and directed. (c) M&L for providing PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete for pole of size 900mm x 600mm x 1500 mm complete all as specified and directed. (d) M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for coping of size 600mm X 600 mm X 300mm high above GL. (e) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coat of aluminum paint over a coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5mm above plinth block. (f) M&L for writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole complete all as specified and directed. (g) Painting of coping with cement base paint all as directed. Note : Manufacture's test certificate shall be produced before execution work.

S & F PVC insulated, multi stranded FRLSH single core copper conductor cable 1.5 Sqmm, 1100 volt for connection to street light fitting complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron strip of size 32 x 6mm as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 40 mm bore medium grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt OF alternate layers of 15 mm thick around and up to top edge of earth electrode plate, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing not less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, and connecting, testing , all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre. 2. Earth filling shall be done by vegetable soil. 3. Soil should be free from stone, boulders, aggregate, gravels etc.

Supply, fixing and testing of LED search light energy saving luminaire , long range, 230 volts , 150 watts with stand manually operated suitable for mounting of search light on for manual rotating of the light on the horizontally (360degree) and vertically (more than 45 degree) with provision of both locking arrangement at desire position with lumen efficiency 110 lumen/watt, protection class min IP-65 , including provision of connecting the same to electric source using 3 core with suitable size , multi-stranded, unarmoured, PVC insulated, flexible copper conductor cable complete all as specified & directed. Make : Philips/Bajaj/Crompton/Havells as approved by GE

S & F of industrial wall mounted fan 450 mm sweep having oscillating motion and speed control facility complete with accessories 230 V, single pole and connecting up including provision of multi stranded copper conductor cable of suitable size from ceiling rose or connector to fan complete all as specified & directed. Make : Orient/Bajaj/Crompton/Havells as approved by GE

M&L for shifting of existing LT panel and connected cables including necessary excavation for LT cable and re-fixing LT Panel at location with necessary connections and suitable PCC platform of LT panel and making good the disturbed surface complete all as specified and directed.

Supply, Install, Testing and Commissioning CPRI type tested, factory made, totally enclosed, IP 54 protection , dust, weather and vermin proof, CRCA sheet out door LT Panel for 415V, 3 phase 4 wire , 50 Hz AC system with TPN tinned copper bus bar vertical or horizontal strip of rating 300 Amps of size 30x5 mm ( minimum) , 'F' class DMC/FRP insulator with short circuit withstand capacity 21 MVA for 1 second, with heat shrink sleeve of appropriate colour coding for phases(RYB) and neutral bus bar of capacity of that of phase bus bar , general construction confirming to IS-8623/93, having bottom base channel of MS section not less than 75mm x 75 mm x 5 mm , entire panel having common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos earth stud, solid connection from main bus bar to switchgears with required size ( minimum 1.5 Sqmm) PVC insulated copper conductor cable , cable alleys, cable gland plates in two half including LED indicating lamp for all phases and , mounted on suitable PCC foundation for the complete panel base with following detailed specification, control and accessories complete:-

OUTER SHELL :- The outer shell shall be made of min 3 mm thick CRCA sheet supported on mild steel angle section 75mm x 75 mm x 5 mm frame with openable front & back with concealed hinges , single door system, lockable/ openable by keys from both sides, having flush pattern fancy locks, louvers & air vent with gasket for natural flow of air. The bottom of the outer shell contains a detachable plate with hinge provision for entry of armoured cable with adequate size glands. Provision of earthing studs at bottom and threaded lifting lugs of suitable size at top to lift the feeder pillar box safely shall be made. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull shall be provided.

INNER SHELL :- Inner shell made of 2.0 mm thick CRCA sheet compartmentalized to accommodate each control gear, front openable, single door system lockable/openable with "U' type gasket to make the inner shell completely vermin proof having chromium plated locks (2 Nos in each compartment) All control wiring shall be with not less than 1.5 Sqmm multi-stranded copper conductor and shall be properly bunched ,tied, ferruled for proper identification and crimped with adequate size of lugs. The cubical shall have a bottom channel of size 75x75x5 mm duly pained with zinc based primer. A detachable predrilled gland plate of thickness 3.15 mm should be used at the bottom, . An inspection lamp with 11 Watt CFL shall be fitted on top side of inner shell. Incoming:- (i) MCCB ,4P, 63A, fixed thermal and magnetic setting, Ics=100%Icu, 16 KA -01 No Outgoing:- (i) MCCB, 4P, 40A, fixed thermal and magnetic setting, Ics=100%Icu, 10 KA , 1 Nos. (ii) MCCB 4P, 32 A, fixed thermal and magnetic setting, Ics=100%Icu, 10 KA -01 Nos. (iii) MCB SPN 32 amps 10 KA (outgoing) - 01 No (iv) Panel mounted on load type change-over switch 4 Pole of capacity 63 Amps - 01 No

Supply, and Installation of double copper wound ONAN type cooling with vector group, DYN-11 , 11/0.433 KV ,3 Phase, 50 HZ, Outdoor, step down distribution transformer 50 KVA, confirming to IS-1180 of 2014 off load tap changing arrangement on HV side in steps in three level of ± 2.5%, ± 5%, ±7.5% having cable box on HV & LV side suitable to accommodate 95 Sqmm 3 core HT cable on HV side and 70 Sqmm 3.5core on LT side The transformer shall be provided with all standard accessories and first fittings of filtered dehydrated transformer oil and shoul be conforming to Energy Efficiency Level 3 of IS-1180 (Part1)2014 complete. The transformer shall have following accessories :- (a) Oil Conservator with filling hole and drain cock. (b) Oil Level Gauge. ( C ) Oil seal type transparent breather with silica gel. (d) Two numbers earthing terminals with lugs. (e) Oil drain Valve/filter valve (f) Radiators with valves. (g) Lifting lugs with fastening holes. (h) Thermometer dial type 0-120 C. (j) Rating & Specification plate. (k) 4 Nos plain cast steel bi-directional detachable rollers. (l) Explosion vent with diaphragm & sight glass. Note :- (i) Transformers must have its neutral brought out for earthing on LV side. (ii) Transformer shall be installed as described in IS-10028 (Part-II and in conforming with IE rule. (iii) Transformers must be earthed by two independent earthing with GI Strip for body and another two independent earth for neutral. Neutral earthing of transformers should be done by using GI earth plate and GI earth strip. (iv) Rate quoted isn inclusive of brick masonry plateform of size 2000 mm X 2000 mm X 1200 mm (above G.L.) for installation of transformer with RCC slab on top duly plastered the external surfaces with cement mortar 1:6 with water proofing compound and painting with cement based paint complete and including chain link fencing and steel gate as per relevant drawing complete all as specified in drawing No.CE/ALD/TD-188 dated 21 May 2011 & directed.

Supplying, fixing, installing and commissioning and testing of 11 KV rated voltage, and 12 kV (max) system Voltage, 50 Hz frequency, 200 Amps continuous current rating, fixed and moving contacts of Cu. alloy( tinned) , single air break isolating switch gang operated, Triple pole, outdoor type, each pole consisting GI steel base, 3 Nos HT insulators (Total 09 Nos) , non ferrous knife and spring loaded contacts, arcing horns of adequate section , horizontal GI pipe adequate length for phase separation, adequate length of GI pipe for operation from ground level and operating handle complete in 'OFF' and 'ON' position, vertically mounting type, mechanically operated, mounted on and including insulators and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps complete with locking arrangements including pad locks with key complete ,providing two coats of Aluminium paint over one coat of primer on all steel surfaces complete all as specified & directed. ( Note:- Rate quoted will be inclusive of CI Clamps, nuts, Bolts, washers, vertical channels paunled with one code primer and two cods of synthetic enamel paints )

M&L for providing of 11 KV HT conductor with insulation sleeve bus bar on two pole structure comprising of the followings :- (a) HT cable lead made out of 3 core XLPE, 95 Sqmm, 5 M long cable including providing lugs and jumpers of required size , CP MS bolts and nuts complete. (b) HT Pin type, porcelain, vitreous, white , brown or green, insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut , 150 mm height, 150 mm dia. For 11000 volts grade- 15 Nos (c) MS Angle iron 50x50x6 mm complete with FI clamps made out of FI 50x6 mm, nuts, bolts and washers -4Nos ( each 2.25 m long) and painting all MS steel surfaces with two coats of synthetic enamel paint over one coat of red oxide primer.

S&F 11 KV HT Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core 95 sqmm XLPE armoured aluminium conductor cable including making all connections complete all as specified & directed.

S&F Lightning arresters ( distribution class) , Conforming to IS-3070 ( Part-3) 1993 ,HT, suitable for 11000 V non linear type complete with all fittings, discharge capacity 5 KA and high discharge 65 kA class complete and connecting to conductors and earthing complete all as specified & directed.

S&F vertical /horizontal water heater storage type, electrically operated of capacity 25 litres, BEE 5 star rated ABS/ steel body and inner tank made with stainless steel duly thermal insulated with 2 KW heating element complete with and including vent pipe , fusible plug, safety valve, earth connector, PVC connections(hot and cold) and electric connection all as specified and directed. Make:- Havells (Cat Part No GHWAMGTWH025 , Veenus (Cat Part No. AUDRA) , Bajaj (Cat part No. MONTAGA as approved by GE.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 4 Sqmm nominal cross sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes of thickness not less than 1.0 mm with earth point painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick ISI Marked laminated sheet cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 4 Sqmm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth point complete all as specified and directed.

S & F polycorbonate FR grade I module telephone socket conforming to IEC 60603 - 7 mounted on suitable size phenolec laminated sheet complete all as specified & directed.

S&F non metallic rigid, medium grade 20 mm PVC conduit complete all as specified & directed.

Supply, erecting, testing and commissioning complete of manufacturer or OEM manufactured, static silent (Sound Proof enclosure) Water cooled Diesel Engine Driven Generating Set capable of delivering 50 KVA(40kw) water cooled, 415 Volts (AC three phase, 4 wire system of supply) 50 HZ at power factor 0.8 minimum. The DG Set shall consists of alternator coupled to a matching capacity D G Set engine, through flexible coupling and mounted on common base frame with AVM with and complete with Automatic on Mains Failure (AMF) control panel standardized by manufacturer, fuel tank with mounting arrangements , draw plug, air vent inlet and outlet connection, level indicator ,exhaust pipe all suitable for conditions at Bareilly including PCC foundation as per manufacture instructions, anti -vibration pads, including all features to comply with latest CPCB guidelines and Comprising of followings:-

(i) ENGINE (Prime Mover) : Diesel Engine 1500 RPM, direct injection, multi cylinders, four stroke confirming to ISO3046/BS 5514, water cooled, naturally turbo charged, capable of giving adequate BHP at outdoor atmospheric conditions at Gorakhpur (Taking all de-rating factors into consideration to drive Alternator capable of delivering 50KVA/40KW, 12/24 Volt (as per manufacturer recommendations) electric battery start, complete with fly wheel all standard fittings/fixtures as per manufacturer and including suitable panel with tachometer, lubricating oil temperature, pressure gauge and frequency meters and also including self starter system, dynamo, fuel electric control panel with electronic governor (ECPG) and Engine protection system (Shut down at High water temperature, low lubricating oil, oil pressure, over speed etc) fuel tank and first fill of lubricating oil and other consumables etc. The scope of supply includes: - -Electrical starter motor 12V /24V as per manufacturer -Battery charging alternator -Fuel system with electronic governor with mechanical governor as back up -Dual spin-on fuel filter with replaceable cartridge -Spin-on full flow lubricating oil filter and pump -Residential type silencer -Dry type replaceable paper element air cleaner -Recovery bottle -Lube oil cooler -01No 12V maintenance free 180AH battery with lead and terminals -Fly wheel and flywheel housing to suitable bearing alternate

(v) ACOUSTIC ENCLOSURE : Sheet metal fabricated cope type silent enclosure manufactured on CNC machines with silence & SS exhaust bellow suitably optimised to meat CPCB sound & exhaust norms, The enclosure shall be designed for reducing the sound level to 75 DB (A) at a distance of 1 M as per CPCB norms along with testing conformance, labelling etc as laid down in GSR No 371 (E) dt 17 May 2002 (vi) Foundation/Plinth/Base : Shall be provided as per manufacturers recommendations, however minimum 0.5 m space should be available all around the Standard height for plinth shall not be less than 0.5 M (vii) Diesel storage tank of adequate capacity for storage of diesel for 12 hours operation of Gen Set. (viii) Fuel strainer and fuel tank with air vent. (ix) copper cable connection from alternator to DG Set AMF panel as directed . (x) Tools ( As per manufacturers instructions ;- (aa) 'D' spanners - 01 Set (ab) Ring spanners - 01 Set (ac) Screw driver 5" to 12" - 01 Set (ad) Cutting plier 9" - 01 No (ae) Hammer 2 LBS - 01 No (xi) Two years spare parts suitable for the DG Set (a) Air filter cartridge - 06 Nos (b) Fuel filter cartridge - - 06 Nos (c) Battery testing meter (Hydro) - 01 No (d) Suitable fan belt set - 01 set (e) Regulator cut out - 06 Nos Note :- The following items are deemed to be included in the rate quoted for DG set. (i) DHPP for testing purpose shall be supplied by the contractor without any extra cost to Govt. (ii)The contractor shall arrange for artificial load for testing for final testing of DG set at site and the cost is deemed to be included in quoted rate. (iii) Testing of sound level should be carried out at the site in presence of officer authorised by Accepting officer.

Supply, erecting, testing and commissioning complete of manufacturer or OEM manufactured, static silent (Sound Proof enclosure) Water cooled Diesel Engine Driven Generating Set capable of delivering 40 KVA(32kw) water cooled, 415 Volts (AC three phase, 4 wire system of supply) 50 HZ at power factor 0.8 minimum. The DG Set shall consists of alternator coupled to a matching capacity D G Set engine, through flexible coupling and mounted on common base frame with AVM with and complete with Automatic on Mains Failure (AMF) control panel standardized by manufacturer, fuel tank with mounting arrangements , draw plug, air vent inlet and outlet connection, level indicator ,exhaust pipe all suitable for conditions at Bareilly including PCC foundation as per manufacture instructions , anti-vibration pads, including all features to comply with latest CPCB guidelines and Comprising of followings :-

(i) ENGINE (Prime Mover) : Diesel Engine 1500 RPM, direct injection, multi cylinders, four stroke confirming to ISO3046/BS 5514, water cooled, naturally turbo charged, capable of giving adequate BHP at outdoor atmospheric conditions at Gorakhpur (Taking all de-rating factor into consideration to drive Alternator capable of delivering40KVA/32KW, 12/24 Volt (as per manufacturer recommendations) electric battery start, complete with fly wheel all standard fittings/fixtures as per manufacturer and including suitable panel with tachometer, lubricating oil temperature, pressure gauge and frequency meters and also including self starter system, dynamo, fuel electric control panel with electronic governor (ECPG) and Engine protection system (Shut down at High water temperature, low lubricating oil, oil pressure, over speed etc) fuel tank and first fill of lubricating oil and other consumables etc. The scope of supply includes: - Electrical starter motor 12V /24V as per manufacturer -Battery charging alternator -Fuel system with electronic governor with mechanical governor as back up -Dual spin-on fuel filter with replaceable cartridge -Spin-on full flow lubricating oil filter and pump -Residential type silencer -Dry type replaceable paper element air cleaner -Recovery bottle -Lube oil cooler -01No 12V maintenance free 180AH battery with lead and terminals -Fly wheel and fly wheel housing to suitable bearing alternate

(v) ACOUSTIC ENCLOSURE : Sheet metal fabricated cope type silent enclosure manufactured on CNC machines with silence & SS exhaust bellow suitably optimised to meat CPCB sound & exhaust norms, The enclosure shall be designed for reducing the sound level to 75 DB (A) at a distance of 1 M as per CPCB norms along with testing conformance, labelling etc as laid down in GSR No 371 (E) dt 17 May 2002 (vi) Foundation/Plinth/Base : Shall be provided as per manufacturers recommendations, however minimum 0.5 m space should be available all around the Standard height for plinth shall not be less than 0.5 M (vii) Diesel storage tank of adequate capacity for storage of diesel for 12 hours operation of Gen Set. (viii) Fuel strainer and fuel tank with air vent. (ix) copper cable connection from alternator to DG Set AMF panel as directed . (x) Tools ( As per manufacturers instructions ;- (aa) 'D' spanners - 01 Set (ab) Ring spanners - 01 Set (ac) Screw driver 5" to 12" - 01 Set (ad) Cutting plier 9" - 01 No (ae) Hammer 2 LBS - 01 No (XI) Two years spare parts suitable for the DG Set (a) Air filter cartridge - 06 Nos (b) Fuel filter cartridge - - 06 Nos (c) Battery testing meter (Hydro) - 01 No (d) Suitable fan belt set - 01 set (e) Regulator cut out - 06 Nos Note :- The following items are deemed to be included in the rate quoted for DG set. (i) DHPP for testing purpose shall be supplied by the contractor without any extra cost to Govt. (ii)The contractor shall arrange for artificial load for testing for final testing of DG set at site and the cost is deemed to be included in quoted rate. (iii) Testing of sound level should be carried out at the site in presence of officer authorised by Accepting officer.

S&F earth continuity conductor or main earthing lead 32 x 6 mm Galvanised iron strip laid in pipe/ fixed on wall are any other position including jointing by tinned Galvanised nuts bolts and washers in addition to brazing at every joint complete all as specified and directed.

Drilling and reaming of vertical bore to suitable dia at approved site/location in any type of strata for UPVC casing bore well pipe of nominal dia 150 mm bore for various depth including all works pertaining to boring complete all as specified & directed. Note: (a) The rate quoted by contractor will be deemed to be included for transportation & erection of Ring machine & all T&P required at site for drilling & reaming etc at site and no extra cost will be paid to the contractor.

Supply and assembly including jointing, lowering and fixing in position UPVC bore well casing pipe 150 mm bore (nominal dia), min 5.0 mm thick of pressure 10 kg/Cm2 ,conforming to IS :12818 including all fittings & accessories such as pipe jointed with EPDM 'O' ring and suitably locked both sides etc complete all as specified and directed . Note : (a) Length of each pipe is 3.0 Mtr (b) Effective length shall only be measured and paid

Supply and assembling including jointing, lowering and fixing in position UPVC slotted casing pipe 150 mm bore (nominal dia), min 5.0 mm thick of pressure 10 kg/Cm2 ,conforming to IS 12818 including all fitting accessories such as pipe jointed with EPDM 'O' ring and suitably locked both sides etc complete all as specified and directed. Note : (a) Length of each pipe is 6.0 mtr (b) Effective length shall only be measured and paid

Supply and assembling including jointing, lowering and fixing in position UPVC submersible column pipe 100mm bore plain with coupler (nominal dia), min 5.0 mm thick of ( heavy duty), conforming to IS 12818, including all fitting accessories such as adaptor stainless steel, pump guard rubber ring , pipe jointed with EPDM 'O' ring and suitably locked both sides all as specified and directed .Note : (a) Length of each pipe is 3.0 Mtr (b) Effective length shall only be measured and paid.

S&F UPVC bottom cap suitable for 150 mm(nominal dia) UPVC bore well casing pipe, complete all as specified and directed.

Supply and assembling including jointing and fixing in position pump guard set incl SS -304 ,bottom adapter with flange ,PVC short piece, min 20 mm SS rod (02 Nos) including nuts, bolts and washers and all other items suitable for fixing submersible pump, complete all as specified and directed.

S&F submersible copper cable 6 Sqmm x 2 core tied with external wall with stainless steel winding wire 4 mm dia complete all as specified and directed.

Supply and assembling UPVC discharge coupler bend 100 mm dia complete all as specified and directed.

S&F well cap for 150 mm dia casing pipe complete all as specified and directed.

S&F MS flat iron housing clamp(02 Nos ) of size 75 mm x 15mm for holding to 150 mm dia casing pipe with 12mm MS nuts, bolt & washers including casting of PCC blocks 1:2:4 type B-1 (Using 20mm graded stone aggregate) of size 0.60m x 0.60M including 50mm dia MS pipe 2 Nos each 1.5mtr long with cap plug and cap top for filling pea gravel including necessary excavation & each work in any type of soil complete all as specified and directed.

M&L for packing pea gravel of size 3 to 5mm natural shape brought direct from river bank and packing around casing pipe to entire depth up to ground level complete all as specified and directed. Note:- Length of assembly packed only will be measured for payment.

M&L for development of tube well by means of over pumping high velocity fitting with 600 PSI air compressor all as specified in IS-8110-2000 para 4.3 including arrangement for equipment fitting and supply of sodium hepta sulphate 60 kg complete all as specified and directed.

Chemical, biological and potability testing of water sample taken from the bore at Govt /NABL approved laboratory complete all as specified and directed. Note:- Test certificate obtained from approved lab will be submitted by the contractor in original.

S & F Submersible pump with motor, single phase, suitable to operate at 180-240 V, copper wound, IP-68, suitable RPM,1.0 HP, vertical type, motor body of stainless steel, Impeller of high quality abrasion resistant material , CI delivery casing , stainless steel shaft, with suitable capacity motor with provision control panel having DOL starter, power rating 1.0 KW with in-built suitable thermal over load protection complete in sheet metal enclosure complete all as specified and directed.

Supply, installation, commissioning & testing of Water cooler fully stainless steel, electric driven single phase having approx storage capacity 40/40 Ltrs and nominal cooling capacity 40Ltrs per hour complete all as specified and directed.

S&F surface mounted square type LED down light fitting 12 Watt, 220 V, AC aluminium die cast body suitable for roof ceiling complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified & directed. Make :- Havells (Cat Part No. EDGEPROSQDLR12WLED840S), Bajaj (Cat Part No. BGSLO leek Recess SQ 12 W WH LED), Orient (Cat Part No. LDRES- 12- C) as approved by GE.

S&F surface mounted round type LED down light fitting 6 Watt, 220 V, AC aluminium die cast body suitable for roof ceiling complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified & directed. Make :- Havells (Cat Part No. EDGEPRORDDLR6WLED840S), Bajaj (Cat Part No. BGSLO leek Recess SQ 6 W WH LED), Orient (Cat Part No. LDRER- 6- C) as approved by GE.

S&F bell ding dong AC, 230 Volts, single pole complete all as specified & directed.

S&F bell push flush type 5 Amps SP 240 Volts complete all as specified & directed.

Supply and install evaporative desert cooler electric driven 230 V, single Phase 50 HZ supply with fan blower, water recirculating pump, three side honey comb removable pads 3Nos of speed four way air deflector, tank capacity min 50 liter of ABS coated body ,air flow capacity min 5000 cum / hr , caster wheel for easy movability with suitable size card( min 1.5mtr) and plug complete all as specified and as directed. Make : Symphony, Kenstar, Bajaj

Schedule of Credit (MINUS) Rs.229360.00 B/F from Serial Page No. 60 & 61 [Note : Details of items for schedule of credit is given on Srl Page No.60 & 61] This amount shall be automatically deducted to arrive at tendered sum

Hindustan Traders

DEORA ELECTRIC WORKS

VEE SONS BUILDERS PVT LTD