CA NO CWE/PAT/T-16/2020-21 SPECIAL REPAIR TO BLDG NO P-43 AND P-06 UNDER GE SOUTH Patiala

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projection etc with mechanical means/grinder complete all as specified and directed.

Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

S&F factory made flush shutters 35mm thick, confoirming to IS : 2202 (part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters compete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and including painting with one coat of pink primer and two coats of synthetic enamel paint and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate - 1 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick PVC celuka Board wooden finish pre-laminated on one side and plain on other side below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf.

S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified.

M&L for single charge, vitrified, stainfree & scratch resistant, joint free, Premium (1st) quality straight edge coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern as approved, set and jointed over & including 20mm th screed bed in CM 1:4 and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light coloured tiles as approved, on vertical surfaces such as in skirting/dado etc, height not more than 150mm, set and jointed over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. .

M&L for Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white or coloured cement to match, in floors etc. complete all as specified. Make : Johnson (Digital HD Tiles) (Barstow Coordinated Floor) or equivalent from Kajaria/Somany as approved by AO

M&L for anti-skid premium (1st) quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4), over 25 mm thick cement concrete 1:2:4 type B-0 complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in water srorage tank of any size/capacity/description/position located on terrace of the building including moving the demolition portions to low lying area or out of defence land all as specified and directed.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with smooth finish edges/sides complete fixed in position all as specified and directed.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

S&F stainless steel tubing 202 grade of 25mm dia mild steel chromium plated 1.0mm thickness as in curtain rod complete including S&F 02 nos stainless steel brackets fency type stop etc in repairs all as specified & directed. Note :- For the purpose of measurement and payment running length of curtain rod only shall be considered.

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. Make : Hindware (WHB-Garnet (Cat No.- 10080), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or equivalent from Jaquar/Parryware/Cera as approved by AO

S&F vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Jaquar (Continental Series-CNS-WHT-963N or equivalent from Parryware/Hindware as approved by AO

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

M&L for toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. Make - Jaguar Cat Part No ACN-1151N./Marc/Cera or equivalent as approved by AO.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Conventional) or Hindware (Slick) equivalent from Parryware

S&F health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified. Make : Jaquar (ALD-573) or equivalent from Hindware/Parryware/Cera as approved by AO

S&F cast iron 4 way junction for 100 mm bore with access door as in repair complete all as specified.

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specified and directed. Make : Hindware (Concealed Cistern-Cento, Flush Plate-Cento) / Cera (Concealed Cistern-Chevron Cat No. - B1110101, Flush Plate-Cat No. B1120101-H Type)

S&F PTMT jet spray with 1.5m long flexible tube including making connections and fixed in position complete in all respect as specified.

PVC(HDPE) SWR , 50 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction,including all fitting elbow, tees, sockets, bends etc. laid in walls & floors for connecting bottle traps & nahani trap complete all as specified.

M&L cast iron multifloor/nahani/floor trap 100 mm dia and 600 mm long including jointing with solvent cement in repair complete all as specified and directed.

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F overhead shower 120mm dia with 225-230mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Cat No. - F7020103)/Jaquar/Marc/Prima

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower of dia 95mm in round shape, single flow (ABS body chrome plated with grey fae plate) with rubit cleaning system and 1.5m long pipe with 8mm dia flexible tube and min 1.5m long chrome finish with nuts and overhead shower 100mm dia round shape multi flow (ABS body chrome plated with grey face plate) with rubit cleaning system with long shank (conceald type) inlets suitable for 15mm bore connection with 300mm long shower arm with 90 degree bends & SS flange complete all as specified and directed. Cat No FLR 5217N of jaquar. Make for hand shower : Cat No HSH 1737 & SHA-571 of Jaquar/Marc/Prima/Cera/Perryware or equivalent as approved by AO. Make for overhead shower : Cat No OHS 1999 & SHA479L300S of Jaquar or equivalent from Marc/Cera as approved by AO.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

Disconnecting existing tanks, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover with nut & bolts and 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, ceilings and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including cutting grooves in brick /concrete wall and preparation of surfaces to receive finishes complete all as specified and directed.

S&F 18 mm thick min density 600 kg/cum LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent as approved by AO

S&F Piano Hinge of size 19 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe all as specified. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

S&F single liver basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and all as specified. Make : Jaquar (Cat No. VGP-81051B(Vintage Prime)) or Cera (Cat No - F1013451) or equivalent from Hindware (Fluid Series) or equivalent as approved by AO

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength in longitudinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified. Make : Sika/STP?Fosroc or equivalent as approved by AO.

S&F Stainless Steel Towel Rack 600mm long with lower hangers including all accessories as recommended by manufacturer for fixing and complete fixed in position in all respect and taking down existing of any description/size all as specified. Make : Jaquar (Cat No. - ACN-1181S) or equivalent from Hindware/Parryware/Cera as approved by AO

M &L un-polished, rough red stone 38-40mm thick single piece as in shelves/cooking plateform including cutting existing brick wall and making good after fixing round off edges complete all as specified. Note : Single piece should be used in shelves top/partition of cupboards.

M & L for dummy joints/construction joints 8mm x 10mm as in PCC floors filled with polyurethane elastic adhesive/sealant (white/grey colour) of approx density 1.3 kg/litre complete all as specified.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified

S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., with flush pipe and including S&F 'P' or 'S' Trap and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Calina S3010102) or Hindware (Orissa Pan Eco) equivalent from Parryware

S&F LED lamp 7W B-22 all as per complete. Make : Havells / CG/Bajaj /Wipro.

Taking down ceiling fan of any type and refixing on the location as directed after cleaning, oiling, overhauling, greasing, replacement of rubber bush, quarter pin etc. including connection with three core flexible PVC Conductor cable of size 23/0.776 complete

Supply and fix in replacement of MCB SP 6 to 32 Amps complete all as specified and directed.

upply and fix in replacement of MCB SPN 6 to 32 Amps complete all as specified and directed.

M&L in replacement Earthing complete and supply and fix earthing with galvanised steel plate earth electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolt, nut check nuts and washer of galvanised iron or steel with protection of GI, medium grade 15mm bore upto adequate length watering pipe 20mm bore GI common solt 15cm thick all as per electrical plate No 5SSR Part-I and connected to earting test point all as specified or indicated and testing on completion including PCC 1:3:6 type C-2 using 40mm graded stone aggregate CI cover and frame including all excavation and earth work etc all as specified and directed.

Supply & fix in replacement of existing unserviceable FTL with new techonlgy self blasted LED retrofit tube lamp with thermoplastic body with high lumen 18 w 6500 K suited for installation in existing t5 tubelight including neccessary electric conection with box type batten. Make : Poly cabor equivalent

S&Fof water heater storage type of capacity 25 litres BEE 5 star rated with electrical heating back up of 2 KW including all necessary required accessories like pvc/cp connection, necessary nut bolts, washer, screws etc and make up of water tank complete all as specified and directed.

Exhaust fans of 250mm sweep, plastic body with and including lourves suitable for operation on 230 V AC 50 HZ complete all as specified.

S&F existing unserviceable SP & N enclosure with 2 pole and earth metal plug & socket for incorporating 10A/20A SPN/DP MSB with plastic cover earth complete with one single pole MCB of 20 Amp complete all as specified and directed.

S&F MCCB 4 pole 100A 25 KA complete all as specified and directed.

Suppy & fix in replacment of existing unserviceable bateen with BOX TYPe Pre-coated CRCA body, heavy duty regal Batten of LED tube universal batten for G13 t8 lamps including necessary fitting on wall and making electirc connectin from ceiling rose to connector with suitble size of electric cable and making good the disturbed surface.

S&F in replacementn of existing unserviceable LED building light IP 66 powder coated pressure die cast aluminium compact high power LED fitting 25 watts with heat resistant toughned glasss medium grade of 1..20 mtr long and make to shape fxing with 40X6mm size of flat iron clamp, nuts,bolts and washer connection including two coat of aluminium paint over a coat of primer and fixing the fitting on bracket and all the electrical connection alll as specified directed.

Supply and fix sheet metal enclousure expoxy powder coated MCCB distribution box double door VTPN 4 way vertical type for MCB's alongwith provn of MCCB as incomer with common bus bar at incoming end of outgoing MCB grouted in wall using required cement concrete of cement mortar making good the disturbed surface matching with existing & providing electrical connection complete alll as specified. Note MCCB and MCBs will be measured and paid under separate items.

S & F Energy saving LED light fitting, 1 X 20 watt, 230 volts, decroative ultra slim linear LED lighting fixture with extruded polycarbonbate, environmental friendly, energy efficient ready to use pack, with electronic driver and with best quality diffuser high lumen output,2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable make Heavell cat Pat No LUMILINEPLUSBS20W

Supply & fix in LED mirror lgiht with linear & cpompact 9W mirror light with decorative grey aend caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt Model : EDGE LITE Cat part No: LHEXARP6PN1W009 Make Havells

M/S RAJ KUMAR GUPTA

M/S Mukesh Kumar Gupta