REPAIR MAINTENANCE OF PLUMBING SANITARY FITTINGS, JOINERY AND CERTAIN MISC REPAIR WORKS AT NGV KORMANGALA UNDER AGE B R II OF GE CENTRAL BANGALORE

Amount

Taking up or down 20mm bore, steel tubing galvanised along with fittings or any other type of pipe and removing complete (work related upto 7th floor height).

Taking up or down 25mm bore, steel tubing galvanised along with fittings or any other type of pipe and removing complete (work related upto 7th floor height).

Supplying and laying of 20mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.(work related upto 7th floor height)

Supplying and laying of 25mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.(Work related upto 7th floor height)

Demolition of plain cement concrete (unreinforced) any description and in any position not otherwise specifically provided for etc complete including removing the materials out side MD land complete all as specified and directed.

S & F in repairs chromium plated health faucet(ABS) with 1 metre long flexible pipe suitable for 15mm bore pipe complete all as specified and directed. Make : PRAYAG Cat No BEA-40 or equivalent of Hindware/Parryware/CERA

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag

S&F in repair Vitreous China Wash hand basin , white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, pillar taps, brass, with capston heads, fancy type, chromium plated, 32 mm waste coupling brass chromium plated suitable for wash hand basins & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 450 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge. Make of basin CERA Cat No S2040105 or equivelent of Parryware/Hindware/Prayag

S&F PVC bathroom mirror cabinet best quality of approximate size 430X330mm fixed to wall using brass screws complete all as directed. Make PRAYAG Cat No 551 or equivalent as approved by GE

S & F in repair 10 litre capacity, PVC valve less syphonic action type, 32mm dia flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including PVC connection pipe of 15mm dia, 600mm long, brackets complete all as specified and directed. Make of cistern CERA Cat No B1010109 or equivelant of PARRYWARE/HINDWARE/PRAYAG

S&F in repair 15 mm bore bib taps cast copper alloy chromium plated with capstan head screwed down to iron pipe, fancy type concealed type complete all as specified and directed

S&F in repair 15 mm bore stop valves/angle valve cast copper alloy chromium plated fancy type with long shank and cup, concealed type, screwed down to iron pipe complete all as specified and directed

S&F in Repair Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified & directed by Engineer-in-charge.

S & F in repairs brass, chromium plated, 15mm bore wall mixer for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8475 or equvelent of Make Hindware/Parryware/CERA

S & F in repairs brass chromium plated shower rose and arm with or without swivel joints, 100mm size including fixing to iron pipe complete all as specified and directed. Make : CERA Cat No F 7020304 or equivalent of Make Hindware/Parryware/Prayag

S & F in repair 2 way bib cock double handle with flange, cast copper alloy chromium plated, screwed down, suitable for 15mm bore iron pipe. Make: PRAYAG Cat No 8312 or equvelent of Make Hindware/Parryware/CERA

S & F in repairs, PVC, water closet seat and cover, white/black closed pattern with recessed bottom, mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed.

S&F in repair steel chromium plated gratings, circular type, 125mm dia with or without waste hole fixed to existing traps with white cement complete all as directed.

S & F in repair waste coupling, 32mm size, brass chromium plated, suitable for wash basin, with long screwed shank and fly nuts.

S & F in repair waste coupling, 40mm size, brass chromium plated, suitable for sink, with long screwed shank and fly nuts.

S & F in repairs PVC connection pipe with PTMT nuts, 600mm long. Make: CERA/Hindware/Parryware/PRAYAG

S&F in repair 32/40 mm dia low density polyethylene (LDPE)plain/corrugated pipes of pressure rating 6 Kgf/Sq.cm with connecting bracket fixed to waste coupling for basin/sinks complete all as specified and directed.

Taking off bib tap, pillar cock, stop/angle cock, & shower rose etc for carrying out repair/ replacement the same in old position after cleaning, replacing washer, spindle and adjusting screws etc complete all as directed.

All as per item No 24 above/ here-in-before but for hot & cold mixing valves/taps.

S & F in repair PVC flush handle including connecting rod & shiphon washer suitable for 10 litre capacity PVC flushing cistern complete all as directed.

S & F in repair PVC shiphon set complete suitable for 10 litre capacity PVC flushing cistern complete all as directed.

Replacing old unserviceable steel brackets for wash hand basin (Flat or angle back) including cutting for pinning in end of 12mm dia bolt erecting stand, inlet and outlet screwed for pipe or connection including necessary packing all as directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia 'D' type, 600mm long between flanges complete all as specified and directed. Make :- CERA Cat No F5007103 or equivalent of Make Hindware/Parryware/Prayag

S & F 5mm thick looking mirror cut to required size and fixing to dressing table using timber fillets including taking off unserviceable mirror complete all as directed.

S&F in repair plate rack made of stainless steel fixed to wall, size 900mmX 750mm X 250mm (36x31x10 ench) Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmx203mm bowl size 405mm x 354mmx203mm (Make: Prayag Cat No 1239D or equivelent of Parryware /Hindware/Cera)

Cutting channel, grove or rebate not exc 15cm girth and trimming surface into or through brick/ concrete block walling buit in cement mortar and making good in Cement Mortar 1:3.

S&F in repair 0.71mm thick plain aluminium alloy sheet 31000 H4 in stepped flashing all as directed.

M & L for excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

M & L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

M & L for removing excavated material to a distance not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius with oval acess door complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with oval acess door complete all as specified and directed.

S&F PVC (SWR) branch piece single,(single Y) 110 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F PVC (SWR) branch piece single,(single Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F PVC (SWR) branch piece (double Y) 110 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F PVC (SWR) branch piece (double Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing the rubbish off the premises outside MD land complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles, Grade B II(a), 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for joint free glazed ceramic, coloured tiles, Grade B III, 7 to 8 mm thick area of each tiles not less than 0.06 sqm as in skirting/ dado/ vertical surfaces of wall including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M & L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Providing cement concrete type E-2, 1:5:10 mix (using 40 mm graded stone aggregate) in foundation filling, sunken etc.

M & L for applying two coats of blown bitumen, any grade, applied hot in concrete surfaces at the rate of 1.50 kg per sqm

M & L for rendering 10 mm thick in cement mortar 1:3 using WPC @ 3% by weight of cement or as instructed by manufacturer on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement as in sunken floor and wall complete all as specified and directed. Note : WPC shall be measured and paid in separate item as supply only.

"Supply only" integral water proofing compound (ISI marked) complete all as specified and directed. (Make : Dr FIXIT/Fosroc/choksey)

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 2 Sqm each complete all as specified and directed.

S&F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) fixed/sliding type window/ventilators, aluminium sections weighing not less than 0.55kg per metre, all are made of from aluminium anodised section including necessary, jointing cleat, glazing clips, rubber packing anodised aluminium snap beading, aluminium fittings such as peg stay 150mm long, hinges 100mm long, suitable handle, screws of suitable size locking arrangement, etc complete all as specified and directed by the Engr-in-Charge.

S&F 35mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F in repair 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F in repair 100 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F in repair 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F in repair 100 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F in repair 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F in repair aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S&F in repair 20mm dia aluminium anodised curtain rods/ towel / ward robe rod etc all as specified and directed.

S&F in repair aluminium anodised brackets for curtain/Towel/ Ward robe hanging rodall as specified and directed.

S & F 100mm aluminium anodised, hasp and staple, safty type, with hinge pin, including bolt to hinge plate and fixed with screws complete all as directed.

S&F in repair aluminium anodised body and tounge door stopper with hard drawn steel spring, 150mm size fixed to door all as directed.

S&F in repair mortice lock, 65mm size, brass, vertical type, 4 lever with minimum 2 keys all as directed.

S&F in repair brass cromium plated, 15mm dia hole, magic eye all as directed.

S & F in repair 175 to 250 mm aluminium anodised, hat and coat hook, solid body fixed with chromium plated screws complete all as directed.

S & F in repair safety chain to door fixed with chromium plated screws complete all as directed.

S & F in repair 250mm long MS hinges for study table folding type approved make and design as directed by Eng-in-charge.

S & F in repair brass drawers/lockers lock, grade - I, size 50mm, 4 lever of approved make and design as directed by Eng-in-charge.

S & F in repair 40mm dia brass cupboard knob, bright finished, fixed with nut, screw and washer complete of approved make and design as directed by Eng-in-charge.

S&F for aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beading complete all as specified and directed

M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination and 3mm thick teak wood beading/edging fixed with screws to timber frame work, complete, as specified and directed

Sri Vijalakshmi Constructions