MODIFICATION WORK OF 132 KV ABU ROAD-RIICO ABU ROAD LINE NEAR SIYAWA VILLAGE LOCATION NO. 135-136 (ON TURNKEY BASIS) USING 132KV, 500 SQMM, XLPE CABLE SYSTEM (3PHASE and 1 SPARE ) INCLUDING DETAILED ROUTE SURVEY, LAYING AND INSTALLATION OF CABLE

220KV D/C NB (350MSpan)TTD-STUB

220KV D/C NB (350MSpan)TTD-S/STR.

ACSR PANTHER (30/3MM AL +7/3MM STEEL)

S/T H/W PANTHER

S/S H/W PANTHER

MID SPAN COMP. JOINT -PANTHER

REPAIR SLEEVE - PANTHER

VIBRATION DAMPER - PANTHER

120KN B&S DISC INSULATOR

70KN B&S DISC INSULATOR

G.I.NUT & BOLT ASSORTED SIZE

SPRING WASHER ELECTRO GALVANISED 16MM

STEP BOLT-16X175MM WITH 2NUTS & WASHER

EARTHING SET-PIPE TYPE

EARTHING SET-COUNTER POISE TYPE

DANGER PLATE

NUMBER PLATE

PHASE PLATE

T-CLAMP PANTHER - PANTHER

PG CLAMP PANTHER - PANTHER

145KV POST INSULATOR(IN STACK)

PI CLAMP -PANTHER

JOINT BOX(24 FIBER) OPGW CABLE

132 kV, Single Core, 500 Sq. mm XLPE Copper Cable as per foregoing specification requirements

145kV rated Voltage Pre-moulded Straight Through Joint suitable for above underground cable

145 kV rated voltage pre-moulded outdoor end termination kit complete with accessories suitable for the above underground cable

Solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase

Galvanized Steel supporting structures/ arrangement, Gantry structures, Ladders etc. for suitable and safe terminations of XLPE cable from Terminal tower/ gantry maintenaing statutory clearances and safety as per IE rules

Earthing Material including cast iron pipes with suitable clamps, charcoal, common salt etc. complete set for each Cable Circuit(each having 3 core + 1 Spare)

Terminal connector suitable for ACSR Panther on the Outdoor cable termination to connect cable end termination to ACSR panther Line.

Terminal connector suitable for ACSR Panther on the 132kV Surge Arrester to connect ACSR panther Line

Warning Tapes as per Specification

Optical Fibre Cable (2 runs of 12F) and associated accessories/items as per specification

132 kV class of 120 kV rating LA with grading ring, discharge counter with Milli meter

Add: Any other item bidder may require to complete the Cable System as per specification requirements

Item Wise BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) 1. Bidders are requested to Refer Volume-I (Condition of Contracts) for filling of taxes and duties as per applicability. 2. Bidders are requested to refer to respective section / clauses for detailed technical specification for items/ works.

NUMBER #

Detail Survey as per tentative routeWhich includes the following major activities Pegging of line route,providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey ,profile preparation of approved route on graph sheet and marking of offset on either side of line,marking of side clearance for hills , sand dunes etc. as per specification and tower scheduling.

Check survey as per approved route of line Which includes Re -checking of the line route as per approved profile, chainage , tower center marking, pit marking,bisection of angle tower as required at site.

(i)Any soil,soft rock other than hard rock

(ii) Hard rock (with blasting subject to permission or without blasting)

(i) Towers including extension upto 9 Meters

Cutting, bending, welding of joints if required, fixing and placing of steel reinforcement as per specification and drawings including material.

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

(B) Earthing of towers legs with counterpoise type earthings excluding supply of materials but including excavation and backfilling in all types of soil. (i)each set by laying 4 wires each 15m long at a depth of 600mm

i) Erection of towers(with extensions upto 9 Meters)

(A) 132 KV and 220KV S/C & D/C Towers (all types)

DESTRINGING- PANTHER-1 CONDUCTOR

RESTRINGING- PANTHER-1 CONDUCTOR

RESTRINGING OF E/W-1NO. 7/3.15MM/ OPGW

DESTRINGING OF E/W-1NO. 7/3.15MM/ OPGW

INSTALL OPGW -JOINT BOX(24FIBRE)

Evaluation of thermal resistivity of soil along cable route (as per technical specification)

Handling, Transportation to site and laying of 132 kV, Single Core, 500 Sq. mm XLPE Copper Cable as per foregoing specification requirements

Establishing of 1 ckt. having 3 Phase + 1 spare 132kV single core, 500 sq. mm copper cable in trefoil/ approved formation along-with pilot fiber cable, providing of Warning tape tagging fixing, pipes for drain & gate crossing as per drawings and specifications in trench by pulling, drawing, etc. including cables, using standard cable installation equipments and as per directions of the engineer in charge and returning of unused items in Store.

Handling and making of straight through joints for 132 kV Single Core 500 Sq, mm Power Cable (XLPE Copper Cable) as per specification

Handling and making of outdoor type cable end terminations for 132 kV single core power cable as per specification

Erection of Galvanized Steel Supporting Structures/arrangement, gentry structure, ladders etc along-with clamps, connectors, nut-bolts, washers, foundation bolts etc. for suitable and safe termination of XLPE cable from terminal towers maintaining statutory clearances and safety as per IE rules for each phase.

Erection of solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase.

Earthing Material including cast iron pipes with suitable clamps, charcoal, common salt etc. complete set for each Cable Circuit(each having 3 core + 1 Spare)

Terminal connector suitable for ACSR Panther to connect cable end termination to ACSR panther Line.

Erection of Optical fibre cable along-with XLPE cable and termination at the both ends

Installation of 132 kV class of 120 kV rating Surge Arrestors with grading ring, dicharge counter with Milli meter

Installation of Terminal connector suitable for ACSR Panther conductor to connect cable end termination to Surge Arrestors.

Charges for conducting pre-commissioning tests as per specification and successful commissioning of circuits

Cutting Black Bitumen surface up-to any depth including all layers of crust for laying Power Cables etc, staking of useful material and disposal of surplus debris including all leads including barricading, providing danger board/diversion board, lighting, reflectors etc.

Horizontal Direct Drilling (Trenchless Digging) method (with 250mm dia HDPE Pipe of minimum 6 PN and strength complying ISS) wherever open cut method cannot be adopted. (If required) (for single circuit with 3 cable core in each circuit + 1 Spare)

Earth work in excavation for buried cable trenches/foundations including dressing of sides and ramming of bottoms, lift up to 2.5 mtr. including taking out the excavated soil & backfilling of jhiri with watering & ramming , timbering & shoring ( wherever required ) disposal of surplus excavated soil as directed with all lead and lift including barricading, providing danger board/diversion board, lighting, reflectors etc.

Providing and laying of Cement concrete including curing, etc using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, excluding the cost of shuttering using 1 cement: 4 sand: 8 stone aggregate (For equipment foundation, junction box etc.)

P&L cement concrete in R.C.C. work in foundation ,rafts, footings, strap beams ,bases of columns etc., including curing ,compaction, finishing with rendering in cement sand mortar 1:3 (1cement :3 sand) and making good the joints , excl., the cost of centring and shuttering and reinforcement :M-20 grade mix 1:1.5:3 (1cement:1.5coarse sand : 3 graded stone aggregate 20 mm nominal size (For equipment foundation, junction box , culvert etc.)

Brick wall works, if required

Providing and fabricating steel reinforcement for R.C.C. work bending ,placing in position and binding complete including cost of binding wire in foundation ,raft footing ,strap beams base of column etc., up to plinth level hot rolled deformed (I.S.1139) cold twisted (I.S.1786)bars (For equipment foundation, junction box \ etc.)

Centring and shuttering with plywood or steel plates including strutting, propping bracing both ways with wooden members and removal of formwork for superstructure up to 4.5m height above plinth level for (For equipment foundation, junction box etc.)

Providing & Fixing of steel fabrication made of angles, tees, square bars or other flats black pipe with hold fast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Providing ,Laying and Jointing RCC class NP-2 Non Pressure pipes (IS:458 Mark ) of approved make with collars, jointed with CM 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete: 450 mm D

Providing & Fixing of Reinforced Ferro Cement Cable Trench Covers designed for 'A' & 'AA' loading duly marked on cover with adequate reinforcement having thickness 75mm to 100 mm anti corrosive bitumen pained MS plate Rim and MS lifting hooks admixtures like plasticizer bond -improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design ( For cable joint box) (For any span)

(i) 250 mm dia.(for single circuit with 3 cable core in each circuit + 1 Spare)

(ii) HDPE PLB Duct for Optical Fiber Cable

Supply and laying inter locking RCC cable covers as per approved drawing

Supply, spreading of clean river sand in the cable trench and cable joint pit as per specification.

Providing & Fixing Cable Route Marker along the route of cable at the spacing of 50 meter etc. as per drawing and site requirement.

Fixing and Installation of fencing arrangement of termination structures for safety and protection alongside the road to maintain safety as per IE rules and providing of Danger plates. (If required)

RR Stone Masonry in F/P CSM 1:4

Plastering 20 mm thickness CSM 1:6

Providing and Laying plane Cement Concrete M-20 grade

For Scope of work as specified at item no. (a) (I to iv ) in Annexure A in schedule X

For Scope of work as specified at item no. (b) (I to iv ) in Annexure A in schedule X

Add: Any other item bidder may require to complete the Civil works as per specification requirements

Please Enable Macros to View BoQ information