Marakkanam Town Panchayat - MPLAD - 2025-26- Toilet

Amount

Investigation charges for Geophysical survey for locating the bore well including cost of all labour charges etc., complete as per standard specification.

Drilling of Borewell anywhere in Tamilnadu including transportation from one place to another with in tamilnadu in alluvial soil sedimentary starta of clay and sand stone shalbe pebbles noulders etx.By first taking a polot bore of 140 mm/150mm dia and then enlarging to rewuired dia direct or reverse rotary mud circulation method using Clayx rigs fuel, labour and drilling bentonite and water required for drilling ar site (Site will be shown by the TWAD Board officers) includinf construction of mud pit.

Remaming 150 mm dia pilot bore to 300mm dia bore as direct by the TWAD Board officerst and including cost and conveyance all metarials to site and all labour charge etc

Supply and delivery of 150m PVC casing pipe without sloted including cost and conveyance of all meterials to site etc complete

Supply and delivery of 150m PVC casing pipe with sloted including cost and conveyance of all meterials to site etc complete

Labour Charges for in inserting 150mm Dia PVC casing pipes assemble (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with cement paste etc., complete supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board

Provision for developing the Bore well with air compress of 300 CFM Capacity (Minimum 8 hours) including transporation, labour and Fuel charges for compressor as directed by Town Panchayat Engineer and conducting Yield test by 'V' notch method

Supply and fixing of 16 Amps DP Switch metal clad of 500 V with fuse and neutral (Side Handle) on Supplyandfixingof16ATPNmetalcladswitchonsuitableangleironframeworkwithMScableentryboxeswithearthconnection only SD-146

Supply and Delivery of 1.00 HP wet type submersible pump set 50lpmX50m head, confirming to IS 8034/89 with ISI marking along with 2.5 sq mm. cable (to 5m lengh) suitable for installation in 150 mm dia bore including Transportation charges etc., complete

Supply and delivery of 1.50 HP panel board suitable for above pump set with all accessories as per IE rules with Is specifation ect., complete

Supply anddelivery of 63mm HDPE hose including cost and conveyance of all materials to site and all labour charges etc.,

Supply and delivery of 2.50 sqmm Copper Cable including cost and conveyance of all materials to site and all labour charges etc.,

Supplying and fixing of 1'' Dia G.I. Service pipe including cost and conveyance of all materials to site and all labour charges etc.,

Supply and fixing of T.Wood Metre Board including cost and conveyance of all materials to site and all labour charges etc.,SD-129

Supply and fixing of 32 Amps fuse carrier including cost and conveyance of all materials to site and all labour charges etc.,

supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 no.19mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .SD-446

Supply and run of 3 of 4 Sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V and grade in suitable heavy gauge M.S. Conduit pipe on wall and ceiling with continued earth wire connection of 14 SWG TC wirewith painting of suitable colour. SD-46

Labour charges for erection of 1 HP Submersible motor including cost of all charges etc, complete

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete 10 m3

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Plain Cement concrete of mix 1:4:8 (One cement four M-sand and eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel (Plinth beam)

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel (Slab)

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel (Column)

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) - Ground Floor

Supplying and Fabrication of Steel and placing in position TMT rod Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department

Brick Work in CM 1:5 (One part of cement & five parts of M - sand) mix using Third Class Country Brick Kiln Burnt bricks 8 ¾ " x 4 ¼ " x 2 ¾" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, cur

Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specific

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. (The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc.,complete. The putty should be got approved by the Executive Engineer before use on work

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated single core unshealhed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipeon wall and ceiling with M.S. accessories inflush with wall with 150mm x 100 mm x 75mm MS switchbox with

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and fixing in positon of R.C.C. jally of 5 cm thick in CC1:2:4 using 20 mm machine crushed jelly including moulding, finishing, curing and fixing in posiion etc., complete.

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Supply and delivery and fixing of 1000 Ltr HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

SANTHAN (BID ID -1511726)