Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST L1 | |
| 2 | L2₹33 L+₹3.2 L (10.7%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹34.8 L+₹5.0 L (16.7%)Rejected-Finance KRAL PORA BAGH I MEHTAB NEAR MANCHOWA PETROL PUMP DISTRICT BUDGAM 190019 J K | BUDGAM | BUDGAM | J K | 190019 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹36.0 L+₹6.1 L (20.6%)Rejected-Finance RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹40.1 L+₹10.2 L (34.4%)Rejected-Finance INDEX NO B 33 NC R O KRALPORA DISTT BUDGAM SRINAGAR J K 190019 | SRINAGAR | BUDGAM | JAMMU AND KASHMIR | 190019 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
11 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
SPL REPAIR TO BLDG NO P-46 AT MANASBAL UNDER GE 970 EWS
2022_MES_537971_1
GE 970 EWS-33/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹94,000
Yes
10 Mar 2023
14 Jul 2022
13 Aug 2022
14 Jul 2022
11 Aug 2022
29 Jul 2022
60 days
Amount
Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 sqm n.exc 4 sqm each complete all as specified and directed.
Taking down Shutters and of any description exc 1.0 sqm and n.exc 2 sqm each complete all as specified and directed
Demolition of unreinforced cement concrete in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed.
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Material & labour 75 mm thick PCC 1:3:6, type C-2, using 40 mm graded aggregates as in sub base etc, finished even and fair complete all as specified and directed.
Material & labour for 25mm thick PCC (1:2:4) Type-B-1 (using 20mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.
Glazed ceramic tiles coloured pattern as required 300 x 200 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with after including 10mm thick backing coat in CM 1:3 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Material & labour Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed.
Factory made machine pressed chequered cement concrete tiles 200mm x 200mm x 25mm thick as in floors set and jointed in neat cement slurry and pointed grey cement and no pigment over with and including 15mm thick screed bed in CM (1:6) complete all as specified & directed
Granite work(of any type), 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platform and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.
Baroda green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
2nd class hardwood plain solid, straight chowkat and frame, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
Factory made 2nd class hard wood 35mm thick plain framed panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed
Factory made 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed
Material & labour 2nd class hard wood 30 mm thick factory made glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.
Solid PVC door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supplying and fixing in opening, edges will be painted to match with printed sheet complete all as specified and directed
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed
Material & labour 0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm and fixed with SS wire staple etc complete all as specified and directed.
3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed
3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane fixed in repair complete all as specified and directed
Galvanized mild steel wire cloth, 0.63 mm nominal dia or wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staple fixed in repair complete all as specified and directed
Material & labour mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed.
Material & labour MS butt hinges medium weight of size 100 mm fixed with screws complete all as specified and directed.
Material & labour SS butt hinges medium weight of size 100 mm fixed with screws complete all as specified and directed.
Material & labour 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
BLANK
Material & labour 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.
Material & labour aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.
Material & labour aluminium alloy handles 100 mm long fabricated type anodised complete all as specified and directed.
Material & labour preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Preparation of new steel surfaces of any description over 10cm in width and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material & labour for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed.
Material & labour brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Material & labour rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth complete complete all as specified and directed.
Material & labour for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed.
Material & labour preparing new plastered surface of walls and applying two coats of cement based paint over a coat of alkali resistant primer etc complete all as specified and directed.
Material & labour preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Anodised aluminiun snap grid frame work for false ceiling of size 605mm x 605mm with and including 6 mm thick non asbestos fibre cement building board and G.I hanger 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long, complete all as specified and directed.
0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed
0.80 mm thick plain galvanised, mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed.
Material & labour 15mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Material & labour 20 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specifed and directed.
Preparation of old steel surfaces of any description over 10cm in width and girth and applying two coat of synthetic enamel paint complete all as specified and directed.
Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade Fe-410-W(Gde-E-250) quality-B including dismantling old steel structure complete all as specified and directed
Complete removal of existing treatment on wall surface and applying two coats of oil bound distemper including preparation of old surface complete all as specified and directed.
Complete removal of existing treatment on walls surface and applying two coats of cement base paint including preparation of old surface complete all as specified and directed.
Supply and fixing in repair rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity ISI Marked incl 15 mm dia ball valve high pressure of PVC with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed
S & F in repair PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and directed
Supply and fixing in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, PVC flushing pipe and anti-syphonage pipe complete all as specified and directed.
Supply and fixing in repair Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including 32mm bore waste pipe, CP waste coupling complete all as specified and directed
Supply and fixing in repair for Soap dish, MS, CP of approximate size 160x160x90mm, complete all as specified and directed.
S&F in repair sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed
Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.
S & F in repair 15 mm bore CP bib taps cast copper alloy, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S & F in repair PVC connection commercial quality 450mm long with PTMT nuts of 15mm bore and fixed complete all as specified and directed
S & F in repair 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
S & F in repair 15 mm bore two angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
S&F in repair PVC bathroom mirror cabinet (box type) of size 600*450 complete all as specified and directed
Supply and fixing in repair for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed.
Supply and fixing in repair Cast iron soil, waste and vent pipe of bore 100mm, sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches or in floor complete all as specified and directed.
Supply and fixing in repair Cast iron soil, waste and vent pipe of bore 75mm, sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches or in floor complete all as specified and directed.
Supply and fixing in repair 100mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Supply and fixing in repair 75mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Supply and fixing in repair 100mm bore cast iron vent cowl complete all as specified and directed.
Supply and fixing in repair 100mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
Supply and fixing in repair 75mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
Supply and fixing in repair Cast iron floor trap outlet diameter 100mm, plain with CI grating including jointing to waste pipe fixed in cement concrete 1:2:4 complete all as specified and directed.
Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair Harrison rail (Curtain rod//drapery rod), 20mm dia, powder coated with and including fancy type PVC bracket 2 Nos of each opening and side stopper powder coated of required shape and size 2 Nos of each opening complete all as specified and directed
S & F in repair Vitreous china urinal, bowl type, flat back of size 465mm x 355mm x 265mm, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe complete all as specified and directed
Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required flush pipe, grating and union for discharge pipe complete all as specified and directed
Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed.
Point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS-H) drawn through and including PVC casing and caping (ISI marked) and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable (FRLS-H), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.
All as per description of srl item No 84 here-in-before but switch socket out let 3 pin, 5 Amp on independent board with other switch.
All as per description of srl item No 84 here-in-before but socket out let 3 pin, 5 Amp on same board
All as per description of srl item No 84 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket combination, 15 Amps on independent board.
All as per description of srl item No 84 here in before but using 4 sqmm (nominal area) PVC stranded copper conductor cable with 4 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket combination, 15 Amps on independent board.
Switch piano flush button single pole one way 5 A, 240 V complete all as specified and directed.
Switch socket combination 2 in 1, 5 Amp flush type, 240 V, complete all as specified and directed.
Socket outlet 2 in 1, 3 pin, 5 Amp flush type, 240 V, complete all as specified and directed.
Switch socket combination 5/15A, 5 in 1, 3 pin, 240 volts complete all as specified and directed.
Ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 240 volts complete all specified and as directed.
Fan regulator, electronic type, five steps socket type single phase, including connection complete all as specified and directed.
Taking down unserviceable any type of main switch, DB's including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
MCB DB SPN 12 way, 230 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.
MCB DB SPN 8 way, 230 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.
MCB DB TPN 4 way, 415 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.
MCB SPN 63 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
MCB TPN 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
Supply and fixing in repair energy efficient surface Mounted LED Luminaire 18/20 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr complete all as specified and directed.
Supply and fixing in repair energy efficient surface Mounted LED Luminaire 10 watts 2' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr complete all as specified and directed.
Supply and fixing in repair 1 x 45 watts LED street light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights complete all as specified and directed.
Supply and fixing in repair ceiling fan with blades and down rods and accessories, 230V, 1200mm sweep, min air delivery 210 CFM complete all as specified and directed.
Material & labour in repairs for Earthing complete with GI earth plate 60x60cmx6mm thick, burried directly in ground (Earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron as earthing lead or steel all as shown in electrical plate No.5 and incl earth work, PCC pit and RCC cover, watering pipe 20mm dia medium grade, funnel, wiremesh, charcoal dust, 15 mm dia medium grade protection pipe and salt etc and connected to earthing test point incl necessary earth work complete all as specified and directed.
Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 4 sqmm and one run of 4 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 6 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 6 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 6 sqmm and one run of 6 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 10 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 10 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 10 sqmm and one run of 10 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Supply and Fixing in repair of exhaust fan of size 300 mm sweep assembling at site including electric connection from ceiling rose to connector with fliexible cord twin core twisted copper of size 23/0.0076 and testing including taking down existing one complete all as specified and directed. Make:- Havells/Bajaj/crompton/Anchor.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for taking out or laying of cable in soft/loose soil and getting out compete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removal of surplus soil to a distance not exceeding 50m where directed at a level not exc. 1.5M above the starting point complete all as specified and directed
Suply and fixing in repair GI tubing for cable protection light grade 40mm bore laid in trenches/fixed with pole etc complete all as specified and directed.
Supply, laying and testing of 40mm bore GI pipe of medium grade including all GI fittings laid in trenches including taking up of old pipe complete all as specified and directed.
Supply, laying and testing of 25mm bore GI pipe of medium grade including all GI fittings laid in trenches including taking up of old pipe complete all as specified and directed.
Supply, laying and testing of 20mm bore GI pipe of medium grade including all GI fittings laid in trenches including taking up of old pipe complete all as specified and directed.
Supply, laying and testing of 15mm bore GI pipe of medium grade including all GI fittings laid in trenches including taking up of old pipe complete all as specified and directed.
Supply and fixing in repair gun metal gate valve of size 15mm dia including connection and testing complete all as specified and directed.
Supply and fixing in repair gun metal gate valve of size 25mm dia including connection and testing complete all as specified and directed.
Supply and fixing in repair gun metal gate valve of size 40mm dia including connection and testing complete all as specified and directed.
Lagging on pipe of internal dia 20 mm, used in external water supply or plumbing all round with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh and finally covering with plaster of paris complete all as specified and directed.
M/S FAYAZ AHMAD BHAT
M/S RATHER CONSTRUCTION CO
FIRDOUS AHMAD BABA
G N Constructions
M/S B S CONSTRUCTIONS
MOHAMMAD YOUSUF MIR
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .