Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.1 L+₹1.6 L (4.69%)Rejected-Finance | L2 | Rejected-Finance Not being Lowest | |
| 3 | L3₹38.8 L+₹4.3 L (12.4%)Rejected-Finance W 701 HARBHAJAN VIHAR AWHO SECTOR 14 SAS NAGAR MOHALI PB 140307 | S A S NAGAR | PUNJAB | 140307 | L3 | Rejected-Finance Not being Lowest | |
| 4 | L4₹39.8 L+₹5.3 L (15.3%)Rejected-Finance | L4 | Rejected-Finance Not being Lowest | |
| 5 | L5₹41.4 L+₹6.9 L (20.1%)Rejected-Finance H NO 4 ANAND VIHAR KANSAPUR ROAD YAMUNA NAGAR HARYANA | YAMUNANAGAR | HARYANA | 133103 | L5 | Rejected-Finance Not being Lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimnadir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-65/2022-2023 REPAIR AND MAINTENANCE TO OTM ACCN IN MAJOR UNITS IN THE AOR OF AGE B/R III AT CHANDIMANDIR
2022_MES_553967_1
GE/CHM-65/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹99,000
Yes
17 Nov 2022
23 Sept 2022
1 Nov 2022
23 Sept 2022
25 Oct 2022
7 Oct 2022
Amount
Taking down chowkats or frame n. exc. 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.
Factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. includidng a shop coat of red oxide, fill of PCC 1:3:6 complete all as specified and directed.
Factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. includidng a shop coat of red oxide, fill of PCC 1:3:6 complete all as specified and directed.
Solid PVC frame (Single Rebated) of size75mm x50mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws fixed as in repair complete all as specified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.
30mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides etc. complete all as specified and directed.
Glazed and gauged skelton shutter (Factory made) 30mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc Size of members of shutters as specified in SSR Part I Section 8, clause 8.24(a) including Kiln seasoned and chemically pressure treated, complete all as specified & directed.
30mm thick (batten thickness) second class hard wood , plain, framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers suplied and fitted to chokhats complete all as specified and directed.
Powder coated aluminum sections as in frames/ shutter of doors/window/ventilators /partitions, (Sliding / openable) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directed Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws . (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section. (v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by Engineer in charge.
5.00mm thick ordinary quality tinted glass, fixed to aluminum frame work , in panels not exc 0.5 Sqm in each pane, complete all as specified & directed.
5.00mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed.
3mm thick aluminium composite panel sheet (ACP) colour as approved by Engr In Charge all as specified and directed.
Mortice lock, verticle type, mild steel, 4 levers, size 100mm, brass body, complete all as specified and directed
Standard GI snap grid of size 605mm x 605mm frame work for false ceiling with main tee 32 x 24 x 1mm thick cross tee 26 x 24x 1mm thick and wall angle 24 x 24x 1mm thick having flange powder coating and covered with PVC thin sheet same to placed in grid by means of ceiling and grid to be tied properly / suitabely by GI strip / GI wire in truss / ridge / purlin fixed as in repair complete all as specified and directed. Note : ceiling board shall be measured and paid as supply only.
Supply only prelaminated particle board 7-8 mm thick of size 600 x 600mm, interior grade, preliaminated one side with decorative choice lamination and other side balancing white liamination, fixed with staples as in snap grid complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed
Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as per serial item No 20 herein before but in skirting etc over and including 10mm thick rendering in cement mortar 1:4
Double charged coloured vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles exc 1.00sqm but n.exc 1.40sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as per serial item No 22 herein before but in skirting etc over and including 10mm thick rendering in cement mortar 1:4
Kota Stone Slab flooring, minimum size 550 x 550mm, 18 to 20mm thick, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, inclduing rubbing and mirror polishing with dismantling of existing old kota stone complete all as specified and directed.
Granite stone slabs, 16 to 18mm thick, width and length as per site requirement, best quality machine cut and polished to be fixed in floors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners where required with and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of existing damaged slab complete all as specified and directed.
Factory made coloured chequered cement concrete tiles 250mm x 250mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Concrete interlocking paver block, with grey cement and no pigment, glossy finish design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, complete all as specified and directed
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar, demolition of mud phuska of any thickness including removal of rubbish from site complete all as specified & directed.
PCC 1:3:6 type C-2 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges, complete finished even and fair to received further roof treatment complete all as specified and directed.
A coat of cold applied bituminous primer @ 0.40 litres per sqm shall be applied on prapared concrete surface & side walls. Than a layer of 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane reinforced with polymer non woven fabric (weight not less than 150 gms/sqm) lweighing 3 kg/sqm (minimum) shall be laid on primed surface by torch application. the side laps shall be 75mm and end lap overlaps shall be 100mm as per manufacturer instructions and finished complete all as specified & directed.
40mm thick brick tiles with including 20mm thick cement mortar 1:4 jointed grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and directed.
All as per serial item No 31 herein before but except tiles –ditto-
Steel rolling shutters (1 mm thickness of lath) without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle fixed as in repair complete all as specified and directed
Aluminum alloy, anodized, sliding door bolt (ISI Marked),250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed.
Dismantling of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.
Brick work with sub class ‘B’ bricks, old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
All as per serial item No 36 herein before but except bricks
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
10mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and smooth with using extra cement complete all as specified.
5mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Preparation of new surfaces of any description of wall etc and applying two coats of oil bound distemper over one coat of interior wall primer including wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed.
Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Demolition of plain cement concrete (unreinforced) of any description and in any position complete all as specified and directed.
50mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed.
40mm thick PCC 1:2:4 type B-1 (using 20m graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) for concealed pipe etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge.
15mm dia medium grade with all fittings to walls, ceiling or laid under floors including taking down old tubing complete all as specified and directed.
20mm dia medium grade with all fittings to walls, ceiling or laid under floors including taking down old tubing complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Single piece EWC of size 365x655x760mm P-trap with UF seat cover, hinges fixing accessories set, fixed in repairs, all as specified and directed. Make : (Hindware, cat Part No 92088(S-30)/ (CERA cat Part No S1013143) /(Jaquar cat Part No FNS WHT 40751S22OUFSMZ)
Full height pedestal wash basin complete set standard with three semi punched tap hole with matching tall pedestal, fixed as in repair complete all as specified and directed. Make : (Hindware cat Part No 10098)/ (CERA cat Part No S2040109) / (Jaquar cat Part No FNS WHT 40801)
Vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest including 'P' or 'S' trap (excluding flushing cistern and flush pipe) and making good to the floor fixed as in repair complete all as specified & directed by Engineer-in-charge.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Factory made solid PVC board 25 mm thick prelaminated one side as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, fixed as in repair complete all as specified and directed. NOTE : Open edge of PVC board shall be covered with pasting of leaping of similar colour
Factory made solid PVC board (white in colour) 16 to 18 mm thick as in kitchen cabinet/ cupboard panell,sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, fixed as in repair complete all as specified and directed.
125mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, including hacking out old broken glass complete all as specified and directed.
4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square exc 0.5 Sqm in each panes, including hacking out old broken glass complete all as specified and directed.
Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
Mild steel sliding door bolt 250mm long, clip and bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate including necessary welding, complete all as specified and directed.
Vitreous china wash hand basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand, fixed as in repair complete all as specified and directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.
110 mm bore PVC (SWR) bends of any radius, fixed as in repair complete all as specified and directed.
Door closer hydraulically regulated aluminum (die cast) body, designation No 3, universal type, suitable for door shutters of 701mm to 850mm in width and of weight between 36 to 60 Kg, fixed in repairs, complete all as specified and directed.
Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed as in repairs, complete all as specified and directed.
D' type, 200mm aluminium powder coated handles for aluminium doors complete all as specified and directed.
Butt hinges 100mm size, of extruded aluminum alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.
Bib taps brass, fancy type, Short body with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs compl complete all as specified and directed.
15mm bore pillar tap, with quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed.
Hollow PVC wall lining, with necessary screws and drilling, PVC panel 0.5mm thick each flap and both flap connected with ribs and overall thickness not less than 5mm design printed in 200 to 300mm wide pannels, fixed as in repair complete all as specified and as directed.
Central hole Basin Mixer, Chromium plated without popup waste system with 450mm long PVC connection and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, 30mm width of flap (when open) including necessary screws all as specified and diredted
Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, chains, hand made sliding bolts, clamps, hold fasts, wall ties, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified.
Steel rolling shutters (1 mm thickness of lath) without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push, pull or manual type fixed as in repair complete all as specified and directed
Repair to rolling shutter in its original position, size of shutter exc 20 but n.exc 25 sqm each with oiling, greasing and making good by hammering, screwing, drilling & other black smith work and making smooth operation complete all as specified and directed.
Dismantling of wall and ceiling board (fibre, pulp insulation etc) any thickness including cover fillet & removing from site complete all as specified and directed
Repair to rolling shutter in its original position, size of shutter exc 15 but n.exc 20 sqm each with oiling, greasing and making good by hammering, screwing, drilling & other black smith work and making smooth operation complete all as specified and directed.
M/s Om parkash
M/s Hari Om Engineer and Contractor
M/s Krishan Aggarwal
RAJESH KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .