Renovation work for Arulmigu Raja Narayana Perumal Thirukovil Melmalayanur Nagar Tk and Villupuram Dt

Amount

Providing Scaffolding for vimanam raja gopuram with non flammebable materials wherever necessary for main form work and by providing coconut keeth as covering the areas & plat form for inspection etc all complete.

Vimanam Height upto 15'-0"

Vimanam Height upto 50'-0"

Dismantling Plain Cement Concrete

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Filling with foundation and basement with Msand in 15cm. Thick layers well rammed & consolidated, including watering, complying with std.specification etc complete.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 including all materials and labour charges.

Single Line

Three Line

Clean removal of lime plaster from walls

Plastering with Lime Mortor 1:1.5 mix to 12 mm thick including finishing,curing,etc complete including cost and conveyance of all materials to site and all labour charges

Painting two coat with approved water based Exterior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification

Dismantling Lime Concrete

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and well watering consolidated with wooden beaters to slop including cost and conveyance of materials to site and labour charges etc complete for 10Cum

Finising the top of the roof with one course of pressed tiles of size 20X20X2cm over a bed of Lime mortor 1:2 12mm thick mixed with water proof compound at 2% b weight of cement including cost and conveyance of all materials to site and all labour charges etc

Restoration by providing herbal water wash and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc

Pointing with Lime mortar 1:1.5 including all tools and plants and labour etc., all complete

Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing I position including all furniture fittings etc complete with std specifications.

Painting two coats over new wood works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Painting two coats over old wood works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supplying and fixing MS grill gate including the cost and conveyance of all materials and fixing in position including priming coat etc complete.

Painting two coats for iron works over the one coat of primer such as iron bars flats and other similar works etc, complete complying with std specification

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with bulb with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of fancy glass shade and 9 W LED for BH point.

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete With S&F of Suitable AI frame on wall with PVC unsheathed copper leads with MS clamps with S&F of SMC box with 10 SPMCB (Higher end ) and with painting .

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of MS clamps of size 1¼' x 1¼' on pillar with suitable Bolt / nuts and painting of suitable colour.

Supply and run of GI hot Tip /Powder coated 16 SWG Cable Tray with 150mm width and 50mm Height on Sutable MS angle with necessary clamping arrangements on the pillars with neccesaary accessories as directed by the departmental officer.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and clamping of 4 x 2.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps.

Supply and laying of 4 x 2.5 sq.mm PVC LTUG armoured copper cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 25/ 10 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains.

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains.

Supply and fixing of powder coated box on wall fabricated with MS sheet of 16 gauge of size 900mm x 300mm x 450mm with 3 nos. of 63A (500V) porcelain fuse units, 1 no. of 63 TPN sheet steel double break switch with HRC Fuse units provision for fixing TNEB meter with electrical connections complete.

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete.

Earthing as per the PWD standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and fixing of brass cable gland for 2 x 4 sq.mm. PVC LTUG armoured cable with earth connection .

sub total

KANCHAMALAI CIVIL WORKS CONTRACTOR (BID ID -1358185)