SPL REPAIR TO BLDG NO T-19, T-22 AND T-23 JCO/OR LIVING AND STORE ROOM AND PROVN OF TOILET BLOCK OF 04 X WC AND 08 X URINAL REGIMENTAL HQ AREA OF 42 ARTY DIV SIG REGT AREN CAMP UNDER AGE B/R-II AT ITARANA ALWAR

Amount

S&F in repairs Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including matching finials at both ends and pair of SS brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F in repair rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I and removing to store with and including 20mm bore float valve with rod and ball complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I and removing to store with and including 20mm bore float valve with rod and ball complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F vitreous china wash down water closet (Pedastal pattern) white (excluding flushing cistern and flush pipe incuding seat cover and Jet) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe and making good to disturbed floor to match the existing finish complete all as specified and as directed.

S&F vitreous china urinal half stall type white excluding flushing cistern , but including CP urinal spreader and waste pipe complete all as specified and directed

S&F vitreous china urinal partition white of size 310mmx700 mm including all fitting accessories complete all as specified and directed.

S&F WHB flat back of SIze 580mmx450mm excluding taps waste chain plug stopper but including brackets, waste pipe, cutting pinning in ends of brackets complete all as specified and directed.

S&F WHB flat back of SIze 580mmx450mm excluding taps waste chain plug stopper but including brackets, waste pipe, cutting pinning in ends of brackets complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of poly ethylene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F PVC low level flushing cistern 10 ltrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of poly ethylene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 600mm long fixed with adapter and washers at both the ends complete all as specified and as directed

S&F PVC connection of 15mm bore with 2 Nos. PTMT nuts, 600mm long fixed with adapter and washers at both the ends complete all as specified and as directed

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed

S&F towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed

S&F in repair 15mm dia bore cast copper alloy chromium plated fancy type pillar tap with out cold & hot water complete all specified and as directed .

S&F 15mm dia bore cast copper alloy chromium plated fancy type pillar tap with out cold & hot water complete all specified and as directed .

S&F in repair Waste coupling of PTMT (half or full threaded) but suitable for urinals, (Minimum weight 32mm-45gms

S&F waste coupling of PTMT (half or full threaded) but suitable for urinals, (Minimum weight 32mm-45gms

S&F PVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors with and including taking out old unserviceable PVC/CI pipe with fittings complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall with and including taking out old unserviceable PVC/CI pipe with fittings complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall complete all as specified and directed.

S&F in repairs 15 mm bore fancy type long body bib tap, half turn, with wall flange chromium plated with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.

S&F 15 mm bore fancy type long body bib tap, half turn, with wall flange chromium plated with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.

S&F in repairs Stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repair swivel shower rose (fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc all as directed.

M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L 15 mm thick rendering on fair faces of brick/stone masonary in CM (1:4) mixed with integral water proofing compound finished with even and smooth complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately under relevant item of this schedule.

M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.

M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed

M&L preparing newly plastered surfaces & applying two coats of oil emulsion distemper (OBD) complete all as specified and directed

M&L brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and as directed

M&L preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer complete all as specified and dircted

M&L preparing newly plastered surfaces & applying three coat of white wash on ceiling complete all as specified and dircted

M&L preparation of old/new plastered surfaces of eall (External/Internal) and applying 1mm thick cement base wall care putty to make surfaces even and smooth complete all as specified and directed.

M&L applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface/.Previously treated surface after complete removal existing treatment.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L machine cut kota stone slab flooring 18-20mm thick laid over with and including 20 mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L 50mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth, surface to be finished even and smooth without using extra cement. Plinth protection shall be laid in panels n.exc 1.5 mtr, 6mm wide and 10mm deep joints shall be made between wall & plinth protection and between panels. Joints shall be filled with bitumen mastic and sand in proportion 1:3 (one part of bitumen and three parts of sand) complete all as specified and directed.

M&L glazed coloured ceramic tiles in vertical surface 300mmx600mmx7 mm thick laid over with and including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.

M&L machine cut Kota stone 15-18 mm thick as in riser of steps, skirting, dado and pillar set over with and including 10 mm thick rendering in CM (1:3) and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified and as directed.

M&L 15-18 mm thick Granite(of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the likes; in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over with and including 15 mm thick screed bed or bedding layer in CM (1:3), including grinding of edges to curved surface finish complete all as specified and directed.

M&L false ceiling with 6 mm thick non asbestos building board (e Board) classic of M/s everest or equivalent as approved by Accepting Officer, fixed with and including GI powder coated grid system comprising 'Tee' or 'L' section suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete all as specified & directed (a) Size of grid - 605 x605 mm. (b) Size of main Tee – 39 x 24.x 0.30 mm. (c) Size of cross Tee –24X24X0.3 mm. (d) Size of wall angle – 24 x 24 x 0.4 mm.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc with and including making grooves on walls and inserting into wall and packing by PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) properly and also including RCC Gola on sheets wherever required with and including dismantling of old roof sheets of any description complete all as specified & directed

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Ridges etc, fixed with self tapping screws etc with and including making grooves on walls and inserting into wall and packing by PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) properly and also including RCC Gola on sheets wherever required with and including dismantling of old roof sheets of any description complete all as specified & directed

M&L 75 mm thick PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in sub base of floor/pavings complete all as specified and directed.

M&L PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and as directed.

S&F 35mm thick IInd class hard wood, factory made panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed

S&F 35 mm thick 2nd class hard wood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made, moulded PVC door shutter 28-30mm thick (style) with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2 mm plain colourprelaminated PVC sheet on the back face, supplying & fixing in frame at site as per specification & drawing complete all as specified & directed

S&F SS sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed all as specified.

S&F powder coated aluminium anodised grill with minimum anodic coating of grade AC 15 of approved design /pattern with approved standard section and fixed to the windows frame with CP brass/stainless steel screws @ 200C/C and U channel where required including cutting the grill in proper size for fixing and operation of handles complete all as specified and directed

S&F in repair 150 mm long SS barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150 mm long SS barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F in repair SS handles 150mm size fabricated type anodized ISI marked complete all as specified & directed

S&F SS handles 150mm size fabricated type anodized ISI marked complete all as specified & directed

S&F in repair MS Retractable Hinge fixed to wooden or steel frames with Screws/welding as required at site complete all as specified & directed. Make : Hitachi or equivalent as approved by GE

S&F in repair SS with galvanised mild steel hing pin butt hinges 100mm long

S&F SS with galvanised mild steel hing pin butt hinges 100mm long

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,with vulcanised rubber piece fixed in floor as directed

Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC (1:2:4) type B-0 to match the existing floor Fe-410 (Gde-E250 quality A).

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with and including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F Aluminium powder coated (thickness of powder coating not less than 50 micron) as in ventilators half fixed with 4mm glass and half louvers with clips of 4mm glass 100mm wide type of frame size 104mmX45.60mm thickness 3 mm, weight per kg /mtr 1.705 and one mosquito proof shutter frame size 44.50mmX25mm thickness1.40mm and weightr kg/mtr 0.560.single leaf cut to size, jointed galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm together with cadium plated steel screwes including rubber packing aluminium beading or gasket for aluminium section for fixing of glass sheet and wire cloth necessary fittings complete screwews plugs complete all as directed Note : Unit rates shall be inclusive of aluminium frame, shutter, glass, wire cloth, louvers and accessories and nothing extra shall be admissible on any account.

S&F Stainless steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F 5 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

M&L 15mm thick screed bed on fair faces of concrete/brick surfaces in CM (1:4) with water proofing compound @ 3% by weight of cement even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified Note : Water proofing compound shall be measured and paid separately here-in-after.

M&L water proofing treatment to RCC roof slab including parapet comprising of following course of treatement/specified from bottom to top (a) Applying Bituminous primer 85/25 @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm and upper side of membrane thermally insulated with white mineral gravel finish , unifirmly embeded during manufacturing process shall only be used, it shall be laid by torch application, side overlap should be 75mm and end shall be 100mm. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside parapet in groove. The same shall be finished by a membrane flashing complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M35 grade and grey cement and pigment for berms laid over with and including 25 mm thick layer of sand cushion complete all as specified and directed.

M&L coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M40 grade and grey cement and pigment for berms laid over with and including 25 mm thick layer of sand cushion complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed

M&L 150 mm reinforced cement concrete pipes, class NP-2, laid and jointed in CM (1:1) with collars complete all as specified and directed

Precast RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in manhole cover slabs, of any thickness, size or shape including necessary form work, set and jointed in cement mortor (1:4) complete all as specified and directed.

Excavation in trenches n.exc. 1.5 Mtr wide and n.exc. 1.5 Mtr in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material, n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

Cutting holes in brick wall built in CM n.exc half brick thick for inserting holdfast and making goood dismentled portion in cement concrete (1:2:4) complete all as specified

M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius half brick thick wall built in CM(1:4) complete all as specified and as directed

M&L RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundation including footing, plinth beam, base for column, etc complete all as specified and directed.

M&L RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified and directed.

M&L RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in slabs sopported on walls, beams and columns in floors, roofs etc complete all as specified and directed.

M&L mild steel (TMT bar)10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia.

M&L mild steel (TMT bar) 5mm to 10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia as in stirrups, spacers, binders etc.

M&L Formwork to edges of concrete flats n.exc. 12cm wide complete all as specified and as directed

M&L form work to side of concrete foundation , footing, bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and as directed

M&L form work to side of pillar, posts, struts, piers, columns etc complete all as specified and as directed

M&L form work to sides and soffits of floor or roof beam, beam haunching, griders, bressummers lintels, cantilevers, shelves including supprots, overhangs etc also splays between floors and beams etc complete all as specified and as directed

M&L form work as in suspended slab, such as roof slabs, floor slabs, landings and similar work, not exceeding 20mm thick(Horizonal or sloping) complete all as specified and as directed

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cills, coping, steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm height kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating complete all as specified and as directed

M&L cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100mm bore pipe.

S&F in repair PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia.

S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia.

S&F in repair PVC (SWR) bend 75mm bore of any radius

S&F in repair PVC (SWR) bend 75mm bore of any radius

S&F in repair PVC (SWR) bend 110mm bore of any radius

S&F in repair PVC (SWR) bend 110mm bore of any radius

S&F in repair PVC (SWR) vent cowl 110 mm

S&F PVC (SWR) vent cowl 110 mm

S & F for Pipe Supporting Clamping - Single Pipe of dia 4" (110 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 4" (110 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE.

S & F for Pipe Supporting Clamping - Single Pipe of dia 3" (75 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 3" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE.

M&L structural steel works as in rafter, purlin, post made of the MS hollow section, square/rectangular ,roof trusses (framed), Fe 410 -W (GdeE- 250) quality-A including distance pieces, cleats etc including one shop coat of primer complete all as specified and directed

M&L providing Post Construction Antitermite Treatment alongwith external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per linear metre including drilling and plugging holes etc in apron with cement mortar 1:2 (1 cement 2 coarse sand ) complete all as specified and as directed.

M&L Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand ) to match the existing floors, complete all as specified and as directed.

M&L Anti termite treatment of voids in masonry, using emulsion @ one litre per holes at 300 mm intervals, including drilling holes at 45 degree and plugging them cement mortar 1:2 (1 cement 2 coarse sand ) , complete all as specified and as directed.

M&L treating the backfil in contact with foundation at the rate of 7.5ltr/sqm (ATT) emulsion of surface area complete all as specified and as directed.

M&L treating the bottom surface of floor at the rate 5 ltr/sqm emulsion (ATT) of surface area complete all as specified and as directed.

M&L treating the soil under plinth protection at the rate of 5 Ltr/Sqm emulsiom (ATT) of surface area complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed.

M&L Hardcore of gauge (broken stones) n.exc 63mm deposited spread levelled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

S&F MS powder coated peg set of six long pattern complete all as specified and directed.

Extra for forming fair finished drain or channel up to 30 cm inner girth in cement concerete, using extra cement including forms/moulds/mitred stopped ends etc complete all as specified and as directed

M&L PCC (1:2:4) type B-0 (using 20mm graded crushed stone aggregate) as in manhole bedding and coping including necessary form work complete all as specified and directed.

Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings /floors etc with and including dismantling of fittings complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed.

All as per serial item No. 135.00 here-in-before but for one fan point controlled by one switch and regulator

All as per serial item No. 135.00 here-in-before but for one exhaust fan point controlled by one switch and regulator

All as per serial item No. 135.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 135.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 135.00 here-in-before but for one light point controlled by two way switch

All as per serial item No. 135.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts.

S&F switch piano, flush type, single pole, two way, 5/6 Amp, 230 Volts.

S&F switch piano, flush type, single pole, one way, 15 Amp, 230 Volts.

S&F socket outlet, 3 pin (with 2 pin outlet also), 5/6 Amps, flush type, 240 Volts, ISI marked.

S&F switch socket combination outlet, 2 in 1, 3 pin, 5/15 Amps flush type multipurpose with fuse & neon indicator ISI marked.

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

S&F stepped type electronic fan regulator, flush and connecting up, SIS marked, 240 Volts.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE

S&F LED type street-DRACO SERIES light luminaire 25 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F LED Bulb energy saving 10/11 W complete all as specified and directed Make :- Havells/Crompton/Syska

S&F sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts.

S&F MCB 63 Amp, three pole & neutral, 415 Volt complete all as specified & directed.

S&F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as specified & directed.

S&F MCB 6-40 Amp, single pole 240 Volt complete all as specified & directed.

S&F Sheet metal enclousure double door type ,suitable for fixing TPN with 200 Amps rated bus bar ,vertical DB 4 way TPN 415 Volts complete all as specified & directed.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 Sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L 40mm dia GI pipe, Light grade for protection of LT cable fixed to walls/ poles/road crossing including clamps complete all as specified and directed.

S&F exhaust fan AC single phase 230/240 Volts of size 300 mm sweep with louver with and including cutting holes in brick/stone wall of required size carefully and making good the disturbed surfaces to match with the existing in CM (1:3) complete all as specified and directed.

S&F 25mm bore GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion to match with the existing with and including taking down of old unserviciable pipe complete all as specified and directed. Note :-Excavation and earth work will be measured and paid separately under relevant items.

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 with and including taking down existing unserviceable sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

S&F in repair 25mm bore gun metal gate valve with iron wheel head, screwed both ends for jointing iron pipes, non rising, forged brass spindle class -I, ISI marked complete all as specified and directed.

shiva construction (BID ID -3130327)

Hitesh Construction (BID ID -3135796)

Radha Enterprises (BID ID -3125848)

M/s S Amarjit Singh (BID ID -3136671)