GIRAWAR ESTIMATE FOR AUGMENTATION OF WATER SUPPLY under JJM

Amount

WATER TREATMENT PLANT (WTP) Design, construction, testing & commissioning of 1.00 MLD capacity Water treatment plant including inlet channel, Alum dozing, Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, pumping machineries and electric cabling, control panels, entire piping network of suitable size laying the DI pipe from raw water pump to inlet box of WTP, WTP to CWT & Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (Sluice valves of make IVC/VAG) .

RAW WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame WATER WORKS 900 LPM X 12 M. Head

CLEAR WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame WATER WORKS 1500 LPM X 45 M. Head

1000 LPM X 35 M. Head

PANEL BOARDS FOR MOTORS Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items For 3 no Pumping Sets of 900 LPM x 12 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 3 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 900 LPM x 12 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 3 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

For 2 no Pumping Sets of 1500 LPM x 45 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB)b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No.d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1500 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

For 2 no Pumping Sets of 1000 LPM x 35 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1000 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make.g)Capacitor KVAR as per site requirement = 1 No.h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)

Sluice Valves / NRV & specials for Pumping Machinery Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 including cost of jointing material complete in all respect. (IVC / VAG make, Kirloskar) 100 mm i/d

Supplying,fixing, testing & commissioning of DI swing check type reflux valve (non returned valve) PN 1.6 including cost of jointing material complete in all respect.( IVC / VAG , Kirloskar make) 100 mm i/d

Supply, fixing & testing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. 100 mm i/d

Supply, erection, fixing & testing of DI Double flanged pipe complete with all jointing materials 100 mm i/d

Sluice Valves/ Specials For Rising Mains & W/W Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) 150 mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. 150 mm i/d

Supply, erection, testing & commissioning of IS marked copper wire for various motors with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc. 10mm2 3core

25mm2 3core

Providing and fixing of insulated Rubber matting suitable for HKV installation 1 meter x 2 meter x 12 mm as per specification.

Providing & fixing suitable size floating along with swivel bend as per required specifications approved by Engineer-in-Charge

Supply erection testing of reputed make LED light 100 wats with fittings and accessories complete in all repects. (4 at ww )

Providing & fixing in position GI elbow ISI marked complete in all respect

Providing & fixing in position GI Nipple ISI marked complete in all respect

Operation & maintenance for the complete scope of work mention in the DNIT (Disinfection material will be supplied by the PHED) as per schedule-IV for a period of 5 year after 12 months during defect liability period 3 month trial run( will be charged to the A/mtc. estimate.)."

Operation and maintenance during defect liability period ( operation only) 1st year

2nd Year

3rd Year

4th year

5th Year

Bidder Name

Amount

SATVIR SINGH CONTRACTOR(GSTN-06ABNPS8716P1ZO)

Kulbir Singh Contractor(GSTN-06ATZPS6352H1ZW)

VINAY KUMAR CONTRACTOR(GSTN-NA)

SATVIR SINGH CONTRACTOR

Kulbir Singh Contractor

SATVIR SINGH CONTRACTOR

Kulbir Singh Contractor