SPECIAL REPAIR REPLACEMENT OF OH LINE TO UG CABLE STREET LIGHTS UG CABLES LIGHT PANELS WITH CONNECTED ITEMS AT ASC CENTRE SOUTH 2ATC UNDER GE CENTRAL BANGALORE

Amount

Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth aying of cables , stay etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft rock complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed .at a level not exceeding 1.5 M above the starting point complete all as directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed. Note: Punned thickness only will be measured and paid.

Supply and laying sub class 'B' bricks of old size (standard size as per local availability) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:4:8 type D2 with 40 mm graded aggregate as in foundation complete including demolition of the same complete all as directed.

M&L for PCC 1:3:6 with 20 mm graded aggregate for coping of poles and stay including form work including demolition of the same complete all as directed.

S&F mild steel work in hard rails , winds ties post and structs in fencing screwed or welded to shaped as directed , including all necessary drilling ,bolting or welding etc, and similar work confroming Fe-290 Gde-E-165.

Supply only MS galvanized chain link fencing (120 to 140 gms) 4mm dia and 75mm spacing and weighing not less than 2.75 kg/sqm diagonally pinned including line wire rails, straining bolts and provision of binding wire complete all as specified and as directed. Make : M/s Sachin , TATA or any approved make as approved..

Fixing only diagonally pinned fencing wire including line wire, any mesh size and type of standards, rails, straining bolts etc. including provision of binding wire complete all as directed.

S&F mild steel screw bolts of 12-15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 22.5 cm but not exceeding 30 cm long complete all as specified.

Supply and fixing in repair GI tubing light grade 50 mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall along with suitable size of MS claps , nuts & bolts etc complete all as specified and directed . ( Note: Excavation / earth work shall be measured and paid separately under relevant items of Sch ‘A’

All as per item No 12 here-in-before but dia of pipe 40 mm .

Supply, fabricate and fix cross arms any size along with, brackets, clamps, bolts, nuts, washers, bracers etc including drilling holes, cold/hot complete and fixed to pole including one primer coat and one under and finishing coat of paint.

S & F ceiling fans complete with blades, down rods,electronic regulator and accessaries 230v,1200mm sweep, Min air delivery 210 CFM with service Value 6.00 BEE Five star rated with Brushless direct current motor (BLDC) Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire as complete all as directed

Supply & fixing and testing exhaust fan of 300mm sweep heavy duty, double ball bearing, 1400 RPM, metalic body , suitable for SP 230 / 240 volt, 50 Hz AC supply complete with louver shutter including fixing / grouting of frame in any type of masonry wall to size by core cutting using core cutting machine & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan finally making good the disturbued surface of walls both internal & external to its original specifications to the satisfaction of Enginner-in-charge complete all as directed. Make : Havels Turbo Force SP or equivalent oin Bajaj/ CG / Orient / Usha as approved (Note : Quoted rate is deemed to be inclusive of core cutting to wall , including finishing the wall surface to its original specifications)

M&L for heat shrinkable straight through joint for LT UG cable including jointing kits complete for making joints suitable for aluminium conductor cable of size 3.5/ 4 core 25 to 50 sq.mm.Make :- M-SEAL / BIRLA 3 M LTD / DENSON /RAY CHEM

All as per Item No.17 herein before but for cable of size 3.5 core 70 to 150 sq.mm.

Supply & Laying in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade 10 Sqmm 2 core XLPE insulated , armoured, electric power cables (heavy duty) with aluminium conductor including dismantling old one. Note: The rate quoted inclusive of termination at ends with suitable aluminium lugs wherever required. Make: Havells/Polycab/ Nicco

All same as per item No 19 here-in-above but 16 Sqmm 4 core

All same as per item No 19 here-in-above but 25 Sqmm 4 core

All same as per item No 19 4 here-in-above but 3.5 core 35 Sqmm

All same as per item No 19 here-in-above but 3.5 core 50 Sqmm

All same as per item No 19 here-in-above but 3.5 core 70 Sqmm

All same as per item No 19 here-in-above but 3.5 core 95 Sqmm

All same as per item No 19 here-in-above but 3.5 core 120 Sqmm

M&L for PVC insulated 2X2.5sqmm multistrand copper conductor for connection of Securiry light to OH or Pole Box including maing necessary connections and testing on competion complete all as directed.

S & F Pole box of size 250x200x105mm ,made of high quality thermoplastic polysterene dust & jet water proof, chemical, acid corrision, impact, insulated & shock proof including connector with 4Nos terminals and including fixing arrangement on pole any type complete all as specified and as directed. Make :Sintex /Emitter/Spelberg /Hensel

S&F 60 W street light fitting New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection,lumen efficancy of LED >140lm/w,system lumensmin 6000 lumens ,power factor >_ .95,and impact resistance of IK 07 with over voltageprotection, output open/short circuit protection,10KV Built-in Surge Protection Device of 60 watt lamp COMPLETE all accessories and electrical connection.

S&F 300W food ligts fitting energy saving and environmental friendly long life LED food light made up of innovative die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC compartment with IP66 protection,lumen efficancy of LED >140lm/w,,power factor >_ .95,and impact resistance of IK 07 with over voltageprotection, output open/short circuit protection,10KV Built-in Surge Protection COMPLETE all accessories and electrical connection.

S&F street light bracket made out OD 32/57mm(suited for LED fittig) of GI tubing medium grade 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 50mm x 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete

Providing trenchless bore using using ultra sounding technique and necessary machine bore of pipe size 200 mm dia suitable for 0.4 mpa working pressure mechanical numatic drilling equipment for passing water pipe line upto 200 mm dia under the existing bituminous/WBM road/PCC hard standings, depth range not less than 1.0 mtr and upto 1.5mtr and making good to the distrubed surfaces of road to match with its existing specifications all as specified and as directed by engr-in-charge at site. Note : 1. Quoted rates deems to be inclusive of transportation charges of Drilling machine, connected accessories and passing pipe through bore complete with required accessories. 2. Pipe will be measured and paid separately. 3. Any damage to MES assets caused during trenchless bore shall be recitfied by the contractor at his own cost.

Supply & fixing in repairs of MCCBs of following current carrying capacity including necessary connecting terminals to bus bar, nut bolts etc as per site suitable complete all as directed .(a) 400 Ampss, 4Pole,Adjustable type, 415 V MCCB, 36KA rating Make: L&T/Havells/ Indoasian/Schneider/ABB

All same as per item No 33 here-in-above but 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 250 A rated

All same as per item No 33 here-in-above but 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 200 A rated

All same as per item No 33 here-in-above but 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 25 KA, 160 A rated

All same as per item No 33 here-in-above but 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 25 KA, 100 A rated

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP – 31), 09 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole with and including necessary earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 mtr, PCC (1:4:8) type D-2 (using 40 mm graded sand stone aggregate) in the base and foundation upto ground level and PCC (1:2:4) type B-1 (using 20 mm graded black trap/granite/basalt stone aggregate) for coping of the pole including necessary form work including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint and including making alternate white and black strips 30 cms height (05 Nos strips) numbering the poles by 2" height 06 Nos letters complete all the metallic surfaces all as specified and directed by Engineer-in-Charge.

Supply, fabrication, installation and testing of LT out door type factory made(CPRI Approved ),Single door front openabale with locking systems junction box of size 900mm(H)X700mm(B)X400mm(W) (over all dimension ) made out of 3.15mm thick CRCA sheet dully supported with mild steel angle iron of size 40X40X5 mm frame, 04 Nos aluminium bus bar of of capacity 250 Amps with drilled hole for incoming/outgoing cable connection with necessary alumiium lungs, GI nuts bolts and washer and 160Amp MCCB 01 No including 08 Nos bridge insulator DMC , heavy duty, suitable for 3 Phase 4 wire system, one danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white with letters, figures and conventional skull & bones in signal red colour and fixed in front door size and PCC (1:3:6) type C-2 foundation 0.30m above normal ground level & 0.30m below ground level with necessary exacavation and earth work and painting to internal and external steel surface with powder coated (Siemence gray) RL-35 after neccesary preparation of surfaces including Indicating lamp LED type 240V 50 Hz AC -one set of 3,ammeter and voltmeter. Make: L&T/Havells/HPL compete all as directed.

S & F Tmelite 40 A 3 pole /230 V Digital time switch, pole mounted single door outdoor type totally enclosed for street light controlling panel incl fixing arrangement with 40X5mm clamp 2 Nos with nuts and bolts complete accessories. Make: Indoasian cat No TL040DB0 or equivalent make of Phillips/CG/Bajaj .

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3.0mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 800 Amps Capacity (Main bus bar ) and 800 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size and including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed. (a) INCOMING: MCCB 4 pole 400Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (b) OUTGOING: MCCB 4 pole 200Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -03 Nos Make: L&T/Legrand/ ABB/Siemens/Havells (c) O/G MCCB TPN 100-63Amp, 16KA,C curve - 02 Nos . Make: Legrand cat No 408683 or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 (e) Digital Volt meter , Ammeter & Multifunctional meter..Make: L&T/Legrand/ ABB/Siemens/Havells

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3.0mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 600 Amps Capacity (Main bus bar ) and 600 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size and including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed(a) INCOMING: MCCB 4 pole 250Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells(b) OUTGOING: MCCB 4 pole 160Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -02 Nos Make: L&T/Legrand/ ABB/Siemens/Havells(c) O/G MCCB TPN 100-63Amp, 16KA,C curve - 02 Nos . Make: Legrand cat No 408683 or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 (e) Digital Ammeter , voltmeter & Multifunctional meter .Make: L&T/Legrand/ ABB/Siemens/Havells

Supply and spread stone metal graded aggregate of size 40 mm at transformer yard complete all as directed by Engr-in-Charge.

M&L for preparation of old painted surfaces of street light poles of any description with coarse cloth/ brush and painting throughout externally on exposed surfaces with two coats of alumimum colour synthetic enamel paint including writing of pole No in white enamel paint on black enamel paint back ground complete all as specified and directed .

M& L for Earthing of machinery/ equipment installed at power house /substation, using Galvanised Iron earth plate eletcrode of size 600 x 600 x6 mm thick as buried directly in ground (earth pit not less than 3mtr below normal ground level connected to GI earth strip 32 mm x 6 mm thick by means of bolts nuts,check nuts and washers at complete etc all as shown in electrical plate No-5 of SSR part-1 connected to earthing test point all as specified or indicated including PCC pit in PCC(1:3:6) type CI MS frame 50mm thick pre cast RCC (1:1½ :3) nominal mix cover slab reinforced with 8mm dia mild steel bar including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc 50mtr and funnel with watering pipe wire mesh GI protection pipe 40 mm bore including testing earthing complete all as specified and directed by Engineer-in-Charge.

Shiva Shakthi Electrical Enterprises

Chandana Enterprises

B5BUILDING SOLUTIONS

RRK PROJECTS

GS TRADERS

M/S - KRUPA ELECTRICALS

kamadhenu Electricals