Painting and misc repairs at admin building welding shop and assembly shop in Aerospace division HAL BC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Cost of tender document (DD no, Date, amount)

Earnest Money Deposit (Number, Date, Amount)

Registered Contractor

Not Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should be at least 30% of the approx. estimated amount put to tender]

TURN OVER IN Rs.

Enclosed

Enclosed

Enclosed

ESI & PF Nos with proof

Related Document to be Uploaded to eProcurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission.(solvency required will be 40% of the approx. estimated amount put to tender)

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Electrical license

Experience of having successfully completed similar works during last 7 years ending last day of April-2026. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

HAL/ASD/NIT-363/26-27 HAL/ASD/R-363/26-27

Painting and misc repairs at admin building, welding shop & assembly shop in Aerospace division, HAL (BC)

Specification

Taking down carefully existing MS windows of any description and size, having area less than 3 Sq mtrs, working at heights, including necessary preparation of surface etc., all complete as directed by EIC/OIC

Wall painting with premium Acrylic Emulsion paint of Interior grade,having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour with Two Coats, working at all heights with scaffolding / staging including necessary preparation of surface etc., all complete as directed by EIC/OIC

Finishing walls with Premium Acrylic Smooth Exterior paint with Silicone additives of required shade on Old work over existing cement paint surface, working at all heights with scaffolding / staging including necessary preparation of surface etc., all complete as directed by EIC/OIC

Painting with Synthetic Enamel paint of approved brand and manufacture to give an even shade :Two or more coats on Old work, working at all heights with scaffolding / staging including necessary preparation of surface etc., all complete as directed by EIC/OIC

Finishing walls with Textured exterior paint of required shade on Old work over and including 2 coats of exterior paint, working at all heights with scaffolding / staging including necessary preparation of surface etc., all complete as directed by EIC/OIC

Supplying, fabricating and fixing Aluminium - glazed Fixed windows with powder coated anodized aluminium sections of high grade alloy approved make manufacturer comprising of the following: The bottom section of the frame shall be around (92x45.5 to 38x1.50)mm weighing . The top and side frame including the handle side and the interlock side shall be around (92x31.75x1.50)mm to accomodate shutter section of around [40x18x1.29]mm all round. The shutters are to be provided with 4.5mm thick tinted glass and stainless steel fly proof shutter for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip including all fittings EPDM gasket with all necessary scaffolding, tools as per approved drawings, etc., all complete as directed by EIC/OIC .

The tenderer shall quote the rates inclusive of GST and all other taxes, duties, levies, fees and charges or any other imposition by the Central / State Government or any statutory authorities of whatever nature. All other costs including loading, un-loading, Insurance, transportation, testing, Certification expenses. L1 (lowest quote) will be determined based on the total quoted amount inclusive of all taxes and other charges as mentioned above.

Payment will be subject to terms and conditions in the tender document