Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC CO OPERATIVE COLONY KAMAPALLI BERHAMPUR GANJAM | ₹6.5 L | L1 | Accepted-AOC Work awarded |
| 2 | L2₹7.2 LRejected-AOC | ₹7.2 L | L2 | Rejected-AOC Not qualify for award |
| 3 | L3₹7.4 LRejected-AOC SHREE NIKETAN GOILUNDI MAIN ROAD COURPTETA BERHAMPUR | BHADRAK | ODISHA | 756121 | ₹7.4 L | L3 | Rejected-AOC Not qualify for award |
Tender Value
₹6.9 L
EMD Value
₹6,900
Closing Date
30 Jan 2026, 4:00 pmClosed
Divisional Officer
ROADS AND BUILDINGS DIVISION, GANJAM - II
Improvement to Existing Airstrip at Rangailunda to 2B Category in the District of Ganjam for the year 2023-24
2026_EICCL_125030_1
SC RandB GM-II-28/2025-26
Open Tender
Electrical Works
60 days
Ganjam
2 documents required · 2 mandatory
₹4,000
₹6,900
Yes
16 May 2026
24 Jan 2026
31 Jan 2026
24 Jan 2026
30 Jan 2026
24 Jan 2026
24 Jan 2026 - 27 Jan 2026
Constrution of DP with 13 Mtr WPB pole - 13 Mtr long WPB Pole with Base plate (30.44Kg/m)
Earthing Device Coil Type
Top Pressure Channel (100x50x6)mm (9.2 Kg/Mtr) Rs.10.00 added for Galvanistaion
DP Bracing Channel (100x50x6)mm (9.2 Kg/Mtr) Rs.10.00 added for Galvanistaion
DP Bracing angle (100x50x6) mm 7Mtr.(4.45Kg/Mtr) Rs.10.00 added for Galvanistaion
11KV Disc insulator B&S Type 70KN Polymer
Hardware fitting B&S Type 70KN Polymer
11KV Pin insulator polymer
H.T Stay set (Complete)
HT Stay Insulator
HT Stay Clamp (1.95Kg/Pair)
7/10 SWG Stay wire
55mm2 AAAC
GI Nut, Bolt & washer
Danger board
Back Clamp for anticlimbing device 25x3mm.flat, 0.59Kg/Mtr, Flat of 0.510mtr length 4 Nos = (4x0.59x0.510)
Anticlimbing device (GI barbed wire 3Kg per support)
Back Clamp for anticlimbing device 25x3mm.flat, 0.59Kg/Mtr, Flat of 0.510mtr length 4 Nos = (4x0.59x0.510)
Sundries Clamp, Binding tape, Connector etc.
Constrution of 11KV OH Line and stringing of conductor due to construction of Compound Wall - 11 Mtr long WPB Pole with Base plate (30.44Kg/m)
Earthing Device Coil Type
100x50x6 mm G.I channel for straight cross arm 1.2 Mtr each 10 No & 0.2 Mtr long 6 Nos for cut point at A & tapping point at C
100mm2 11KV Insulated Covered Conductor
Disc insulator(T&C) 70 KN Polymer
IPC For covered conductor
Dead End Clamp 11KV
Non Metalic Ties 11KV (for covered conductor)
11KV Pin insulator polymer
H.T Stay set (Complete)
HT Stay Insulator
HT Stay Clamp (1.95Kg/Pair)
7/8 SWG Stay wire
100x50x6 mm GI Channel for straight cross arm (2.8 mx4 pcs) for Guarding
No-6 G.I Wire (Dia 4.8mm)
EYE hook for Guarding
G.I pipe Earthing 40mm Dia medium gauge 03mtr long at both end of guarding
25x6mm GI Flat
GI Nut, Bolt & washer
Anticlimbing device (GI barbed wire 3Kg per support)
Back Clamp for anticlimbing device 25x3mm.flat, 0.59Kg/Mtr, Flat of 0.510mtr length 4 Nos = (4x0.59x0.510)
Danger board
Back Clamp for danger plate 25x3mm.flat, 0.59Kg/Mtr, Flat of 0.510mtr length 2 Nos = (2x0.59x0.510)
Sundries (Clamp, Binding tape, Connector etc.
Civil Part - Concreting of poles in ratio 1:1.5:3 for 13 Mtr WPB Poles
Couping of poles in ratio 1:1.5:3 for 13 Mtr WPB Poles
Concreting of poles in ratio 1:1.5:3 for 11 Mtr WPB Poles
Couping of poles in ratio 1:1.5:3 for 11 Mtr WPB Poles
Material for masonary Work for earth pit, Charcoal, Salt etc including construction of earthing chamber (Size: 2"x2") and RCC slab cover
Cement concreting for stay/Stud Anchor plate/Stud C.C foundation 1:3:6 size by using 4cm size HBG metal=([email protected]=1263.03 or 1270.00
Dismantling Charges for HT Lines (A-B-C)
Dismantling Charges for HT Poles
Erection of HT Pole due to diversion of existing canal - 13 Mtr long WPB Pole with Base plate (30.44Kg/m)
100x116 MM Joist Pole (23 KG/Mtr) 11 Mtr Stud Pole
Stud Clamp
G.I Base Plate (500x500x10mm) @20Kg/Pc
Earthing Device Coil Type
100x50x6 mm G.I channel for straight cross arm 1.2 Mtr each 10 No & 0.2 Mtr long 6 Nos for cut point at A & tapping point at C
55mm2 AAAC
Disc insulator(T&C) 70 KN Polymer
hardware fitting B&S Type 70KN (3Bolted)
PG Clamp for 55mm2AAAC
11Kv Pin insulator polymer
H.T Stay set (Complete)
HT Stay Insulator
HT Stay Clamp (1.9Kg/Pair)
7/8 SWG Stay wire
100x50x6 mm GI Channel for straight cross arm (2.8 mx4 pcs) for Guarding
No-6 G.I Wire (Dia 4.8mm)
EYE hook for Guarding
G.I pipe Earthing 40mm Dia medium gauge 03mtr long at both end of guarding
25x6mm GI Flat
GI Nut, Bolt & washer
Anticlimbing device (GI barbed wire 3Kg per support)
Back Clamp for anticlimbing device 25x3mm.flat, 0.59Kg/Mtr, Flat of 0.510mtr length 4 Nos = (4x0.59x0.510)
Danger board
Back Clamp for anticlimbing device 25x3mm.flat, 0.59Kg/Mtr, Flat of 0.510mtr length 2 Nos = (4x0.59x0.510)
Sundries Clamp, Binding tape, Connector etc.
Cement concreting for stay/Stud Anchor plate/Stud C.C foundation 1:3:6 size by using 4cm size HBG metal=([email protected]=1263.03 or 1270.00
Concreting of poles in ratio 1:1.5:3 for 13 Mtr WPB Poles
Couping of poles in ratio 1:1.5:3 for 13 Mtr WPB Poles
Concreting of Support C.C 1:1.5:3 for 11 Joist Pole (Stud pole)
Dismantling Charges for HT poles
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_577604.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_2.pdf
PDF • 1.18 MB
Tendernotice_1.pdf
PDF • 0.14 MB
BOQ_577604.xls
BOQ • 0.60 MB
Download all tender documents and submit your bid