REPAIR TO BOUNDARY COMPOUND WALL FENCING PATH AND DRAIN AND OTHER WORK IN OD SHAKURBASTI AND HIRANKUDNA UNDER AOR OF AGE BR II OF GE NORTH DELHI CANTT 10

Amount

Taking down cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified.

All as per the description of srl item No 03 above but except bricks

M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate as in coping and benching rounded or chamfered on edges incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

M&L for 15mm thick ready mix cement plastering over brick wall in cement mortar on external surface finished even and smooth completeall as specified

Preparing new plastered surfaces of walls and applying two coats of cement base paint, over a coat of alkali resistant priming paint complete all as specified

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling in wall care putty in holes existing or created, again sand papering thus making surface smooth and one coat of cement base paint complete all as specified and all as directed.

Demolition of cement concrete in ground floor (unreinforced) and pavings including tiles etc ,n exc 15cm thickness (below or above ground level) complet all as specified.

M&L for PCC 1:4:8 type D-2 as in sub base of flooring 75mm thick all as specified and directed.

M&L for sand filling 40mm thick under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking payer block any shape and size conforming to IS -15658-2006 of 60 mm thickness (M-35 Grade) with grey cement and no pigment all as specified and directed.

M&L Chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor etc including taking out/dismantling of old pipes complete all as specified.

Dismantling fencing wire mesh, any type as per site complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc as dirrected.

S&F in repairs 600mm dia razor blade concertina coil complete all as specified.

Supply only chain link MS galavnised any size and type complete all as specified and directed

Fixing only chain link fencing including line wires any mesh size & type to any type of standards rails straining bolts etc. incl provision of bindig wire.

S&F screw bolts (machine made) with hexagonal or squre heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts not exc 5cm and dia of shank 10mm complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embedded portion in natural ground and making good disturbed ground all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embedded portion in concrete, brickwork, masonary, etc. and making good disturbed ground all as specified and directed.

M&L PCC 1:3:6 type C2 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete all as specified and directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L for providing 35mm thick precast cement concrete jallies, with moulding set in cement morter 1:4 in precast concrete type B0 1:2:4 (12.5mm graded crushed stone aggregate) including taking down old exiting jalli complete all as specified and directed.

Raking out existing joint/pointing to brick wall built in cement mortar all as specified and directed.

M&L flush pointing to brick walls in cement mortar 1 :4 complete all as specified and directed

M&L for 40mm thick cement concrete 1:2:4 type B-0 as in floor including surfaces to be finished even and smooth with using extra cement complete all as specified and directed

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

M&L for brick work with sub-class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 14 complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

BEHAL TRADERS (BID ID -3100895)

V r traders (BID ID -3105400)

PUNEET CONSTRUCTIONS CO. (BID ID -3098095)

friends associeates (BID ID -3102275)

MOHIT ENTERPRISES (BID ID -3101175)