Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-Finance 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-Finance Lowest | |
| 2 | L2₹28.8 L+₹6,306 (0.22%)Rejected-Finance 401 SHRINAT HEIGHTS HADAPSAR ROAD SURVEY NO 97 MANJARI BK HAVELI PUNE 412307 | PUNE | MAHARASHTRA | 412307 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹32.8 L+₹4.1 L (14.3%)Rejected-Finance BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹33.1 L+₹4.3 L (15.0%)Rejected-Finance | L4 | Rejected-Finance Not Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 113 OF 2023-2024
2024_MES_647721_1
GE (N) P/TOKEN- 113 OF 2023-2024
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹80,000
Yes
16 May 2024
23 Mar 2024
25 Apr 2024
23 Mar 2024
18 Apr 2024
6 Apr 2024
25 Mar 2024 - 30 Mar 2024
Amount
Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed
M&L for Pre-cast cement concrete block masonry with solid blocks type C-1, 1:3:6 (20mm graded agg) exc10cm in width and setting in mortar complete built in CM 1:6 in any description complete all as specified and as directed
M&L for brick work precast solid concrete block masonry (except blocks) in CM 1:6 incl demolition of brick work /precast concrete block walling built in cement mortar or cement lime mortar incl all quions, arches, pillars etc(serviceable/usable blocks and brick work obatined from other items shall be re-used under this item and cost of demolition of the same deemed to be included in this item) complete all as specified and as directed
M&L for fly ash brickwork, straight or curved on plan exc 6m mean radius built in CM 1:6 in any description complete all as specified and as directed
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water incl necessary scaffolding etc complete all as specified and directed
M&L for 15mm thick rendering on newly plastered of brick or concrete wall surfaces etc in CM 1:4 fair and even without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge
M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge
S&F for providing 35mm thick precast cement concrete louvres and jallies Type B0,1:2:4 (12.5mm graded stone agg) (measured solid), set and cement mortar 1:4 including all mouldings & taking down old one complete all as specified and as directed
M&L for Providing, cement concrete 1:2:4, type B-1(20mm graded crushed stone agg) in roof kerbs or mud stops,coping etc rounded or chamfered on edges complete all as specified and as directed
Dismantling wrought iron steel or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F in repair for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(Gde-E- 250) quality-A complete all as specified and as directed.
S&F in repair steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed
M&L for cutting holes in brick walls exc half brick and n.exc full brick wall in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in Charge
-ditto- all as per item No 18, here in before but plain sheet on roof ridge
Excavation of post holes (or similar holes) each n exc 0.5cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm for soft/loose soil complete all as specified and as directed
M&L for PCC 1:4:8, type D-2(40mm graded crushed stone agg) as in foundations,filling and mass concrete complete all as specified and as directed.
S & F Mild steel work for posts and struts in fencing of angle iron including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
S & F for mild steel galvanised chain link fencing of 3mm dia GI wire, 75mm x 75mm mesh size and weight not less than 2.5Kg per Sqm conforming to IS: 2712, galvanised coating of type heavy as laid down in IS: 4826 including line wires fixing to any type of standards, rails, straining bolts etc. including provision of binding wire, make as approved by GE including dismantling existing chain link fencing complete all as specified and as directed.
M&L for mild steel round bars10 mm dia and over, cut to length, bent to shape required, for stiffners and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 5 to 10mm complete all as specified and as directed
S & F in repair for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. in aprons, barriers, gates and similar works etc (each line wire to be measured) complete all as specified and as directed
Restraining securing including making good staple etc. galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. in aprons, barriers, gates and similar works etc (each line wire to be measured) complete all as specified and as directed.
S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.
S & F in repair for mild steel 1.25mm thick plain, black sheet in wall cladding steel gate and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.
M&L fo repair of Steel gate of any size , any shape and any position. Taking down steel gate and repair holdfast, uplifting of steel gate, welding to required member, repair/greasing to roller,repair and repositioning of Base Rail , make in true position to revolve, complete all as specified and directed by Engr- in - Charge.
S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall/trenches incl GI clamp with screw complete all as specified and as directed.Make:ISI marked
S&F in repair 110mm dia PVC (SWR) bends in any radius fixed with pipe complete all as specified and as directed.Make:ISI marked
Taking out semi soild, liquid suspension sludge and foreign material from man hole/septic tanks/ soakage well of any description and any depth including pumping out of water and removing materials either by the same in covered van or trolley at out side MoD land and burring the same (semi solid/liquid shall not be burried) in ground inc complete all as specified and as directed. (Note: The location at outside MoD land for disposal of forieign materials obtained above shall be located by the contractor himself)
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete.
S&F glass dividing strips 3mm thick, 38mm wide and inserted in position to confirm to design complete all as specified & directed.
S&F for factory made 50mm thick, 950mmx650mm manhole cover with additional frame for fixing, of fixing of pre cast RCC 1:2:4 type B-1 (using 20mm graded agg) finished the surface even and fare including reinforcement MS TMT bars 8mm dia @ 125mm centre to centre bothways and set in CM 1:4 and handles including demolition of RCC (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.
-Ditto- all as per item No 36, here in before but 600mmx450mm size complete all as specified and as directed
Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.
Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded agg) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia of bore pipe including demolition of existing old one with PCC complete all as specified and as directed.
-ditto- all as per item No 41 here in before but 200mm dia of bore
M&L in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition of existing old one (salt glazed earthware, AC or reinforced pipes etc) set in cement mortar complete all as specified and as directed.
-ditto- all as per item No 43 here in before but 200mm dia of bore
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting our existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC(1:2:4) type B-1, smooth finished and reforming benching as required for 150mm dia of pipe complete all as specified and directed.
S & F in repair 20 mm brass gun metal globe or gate valves with iron wheel head,screwed both ends for iron pipe and fixed .complete all as specified and as directed.
S&F 15mm bore tubes med grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified.
All as per Srl item No 47 here-in-before, but taking down and fixing only
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified.
All as per Srl item No 49 here-in-before, but taking down and fixing only
Dismantling existing interlocking paver blocks, removing rubbish off the premises and laying the same tiles/ blocks on existing places with repair of existing PCC for 60mm thick tile, in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile complete all as specified and as directed.
M&L PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in sub base including demolition of existing concrete complete all as specified and as directed.
M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.
M&L for 18-20mm thick granite (of any type) work ( table rubbed and polished) in steps, jambs.pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl demolition of existing stone of any description complete all as specified and as directed.
M&L for pre polished chequred tiles of size 300x300x25mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing floor and including 20mm thick screed bed and bedding of layers in CM 1:6 including demolition of existing tiles complete all as specified and as directed. Make: Jhonson endura textured design or equivalent
S&F for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 including dismantling existing steel complete all as specified and as directed.
S&F in rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete incl dismantling existing water tank complete all as specified and directed.
-Ditto- all as per srl item No 57 here in before but 1000ltr capacity complete all as specified and directed
Removing of vegitation/plantation on the wall, roof or any description upto three stories of building including necessary scaffoldings and roots superficial area n.exc 2.0sqm each and making good of surfaces by applying chemical treatment with GLYPHOSATE 41% incl removing / refixing of GI/CI pipe lines complete all as specified and as directed. (Note:Brick work, plaster and PVC/CI/GI lines shall be measured and paid separately)
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
GS Associates
Vijay Construction and Company
THE SAIRAM CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .