Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.3 Cr
EMD Value
₹2 L
Closing Date
21 Nov 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bangalore Metropolitan Transport Corporation
Rangaraju
Improvement of Electrical Infrastructure in Shanthinagar TTMC, CWS-1 and Depot-2 at Bangalore
BMTC/2024-25/EL/WORK_INDENT117
BMTC/2024-25/EL/WORK_INDENT117
Open
Electrical
Two Tender Document System(Two Cover)
Bangalore Metropolitan Transport Corporation Office Bengaluru
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Should be valid registered Class-I Electrical Contractors/Firms registered in Department of Electrical Inspectorate, GoK.
Work-done Certificate for having satisfactorily completed as a prime contractor for at least one similar nature of work, i.e., Electrical HT and LT infrastructure work not less than 50% of amount put to tender i.e., Rs. 63.58 Lakhs in last previous five years in any of the Government / Public Sector Undertaking i.e (2019-20, 2020-21, 2021-22, 2022-23 & 2023-24 till date)
Executed in any one financial year during the last five years (i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24 till date) the following minimum quantities of work in any of the Government / Public Sector Undertaking. 1) Supply of HT / LT cable :- 2.56 Kms and 2) Supply of Indoor / Outdoor LED lighting fixtures :- 420 No.s
Should have achieved in at least two financial years a minimum annual financial turnover (in all classes of electrical works only) of not less than twice the amount put to tender out of the last five financial years (2019-20, 2020-21, 2021-22, 2022-23 & 2023-24). ie, Rs. 254.30 Lakhs
Liquid assets and availability of credit facilities of not less than 30% of the equivalent of the amount put to tender. ie, Rs. 38.15 Lakhs
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value.
₹3,180
₹2 L
14 Nov 2024
14 Nov 2024
22 Nov 2024
19 Nov 2024
19 Nov 2024
Improvement of Electrical Infrastructure in Shanthinagar TTMC, CWS-1 and Depot-2 at Bangalore
Open Conduit System: Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes,...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. ...
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge s...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS mu...
Do- Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box 2.2.2
Do- Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 2.2.3
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or conceal...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance con...
Providing Submersible Pump Set of 100 / 150 mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per neces...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm 13.25.1
Labour charges for Erection, Electrification and commissioning of Pumpsets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Br...
Do- 3 Way 3.3.2
Do- 6 Way 3.3.4
Do- 8 Way 3.3.5
Do- 18 Way 3.3.8
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts ...
Do- 3 Module 3.5.2
Do- 4 Module 3.5.3
Do- 6 Module 3.5.4
Do- 8 Module 3.5.5
Do- 10-12 Module 3.5.6
Do- 18 Module 3.5.8
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch 3.6.1
Do- 6A Two Way Switch 3.6.2
Do- 6A Three Way socket 3.6.3
Do- Stepped Fan Regulator Two Module 3.6.4
Do- 6A Bell Push 3.6.8
Do- 32A DP Switch 3.6.9
Do- 6/16A Universal Socket 3.6.10
Do- TV/Telephone Socket 3.6.11
Do- RJ45/I.O Outlet Cat-6 3.6.12
Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in s...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. 5.47
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 250 A 5.12.5
Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. P...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. P...
Supplying and fixing of Shunt trip suitable for MCCB.CBCT 5.16
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...
Do- 40 A TPN 5.18.8
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing su...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capa...
6 Way TP & N 5.19.12
8 Way TP & N 5.19.13
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, ...
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter 5.29
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. 5.38
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to
20A single phase Class-1 Accuracy with Temper Proof Energy Meter. 5.30
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 ...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 p...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current
Transformer Class 0.5 accuracy with Tape Wound. 5.34
Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relay...
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PV...
Do- 250 A 4 x 30 x 10 mm Aluminium Strips
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and t...
Do- 50 x 100 x 50 x 6 mm C channel 5.41.4
Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, pro...
Supply and fixing of fully Enclosed Automatic Transfer Switch (ATS) Pre-wired with Flexible Settings and seamless transfer between two power sources. The enclosure made of MS Powe...
Supply and fixing of Auxiliary contactor relay with 2 NO and 2 NC contact and operating coil voltage of 220V to 260V. fixed on existing wood/panel board using necessary bolts, ...
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machiner...
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. 6.1
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm) 6.2.1
Do- 15" Sweep (450 mm) 6.2.2
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. 13.14
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS...
Supplying wall mounting / Pedestal fan suitable to operate at single- phase 230v AC. supply. 400 mm Sweep 6.5.2
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A...
Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condens...
Do- 2 Ton capacity 6.8.6
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type ...
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdo...
Supplying installation testing and commissioning of heavy duty compressor suitable for window/split type A/C. 1.5 Ton 6.14.2
Do- 2 Ton 6.14.3
Supply and fixing of condensing coil for Split Air Conditioners. 2 Ton 6.15.3
Supplying and fixing capacitor's (of approved make) for window /split air conditioners. 80 to 200mfd starting capacitor. 6.16.2
25 to 45mfd running capacitor. 6.16.1
80 to 200mfd starting capacitor. 6.16.2
Supplying & fixing relay for over load protection for window and split air conditioners. 6.17
Supplying and fixing the fan motor for blowers and condenser of 1/5 HP, single shaft/double shaft suitable for split / window air conditioners. 6.18
Supplying & filling refrigerant (F-22/F/12) for air conditioning equipment's. Which includes the labour & Nitrogen gas for pressure and leak testing. 6.19
Supplying & fixing of thermostat for window type air conditioner. Multi range 30 to 60 degree Centigrade (without probe), adjustable universal type 6.20
Supplying and fixing electro mechanical / Pneumatic time switches. 6.21
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.
Supply and fixing of out door condensing unit complete with condensing coil, blower, fan etc., complete suitable for Split Air Conditioners. 1.5 Ton 6.23.2
Supplying & filling refrigerant latest R-410 / R-32 for air conditioning equipment's. Which includes the labour & Nitrogen gas for pressure and leak testing. 6.31
Supplying and commisioning of AC Remote 6.33
Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, o...
Supplying and drawing UTP-CAT 6E LAN cable. 8.1
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2Pair 8.2.2
Supplying & Fixing of switch mounting rack with power manager Cable manager. 42U with 650mm depth 8.4.10
Supplying & Fixing of switch mounting rack with power manager Cable manager. 42U with 800mm depth 8.4.11
Supplying fixing of Network Switches 48 Port Gigabyte (manageable) 8.9.1
48 port 10/100/1000 Switch 8.9.9
24 port 10/100/1000 Switch 8.9.10
16 port 10/100/1000 Switch 8.9.11
8 port 10/100/1000 Switch 8.9.12
Supplying & Fixing of ... ms Cat 6 Patch Cable 1 m. 8.11.1
Supplying & Fixing of Patch panel for LAN cabling 48 Port 10/100/1000 patch panel 8.12.4
Do- 24 Port 10/100/1000 patch panel 8.12.5
Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI ...
Do- LED light fitting 1 x 4' - 36/40 W 11.3.3
LED Down light: Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housin...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilin...
LED modular down light 2'x2' 36 W 11.6.3
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC ins...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear di...
Do- LED Streetlight 90 W 11.8.4
Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or G...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare c...
Do- LED Floodlight 200W 11.9.6
Do- LED Floodlight 240W 11.9.7
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wir...
Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. Ding Dong Bell 12.2.1
Do- with Remote 12.2.3
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel...
Supply and fixing GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip 12.58.3
Do- 25 x 3 mm Copper strip 12.58.7
Do- 600 x 600 x 3 mm Copper plate
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thi...
Do- 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) 32.07
Do- 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm) 32.18
Do- 400 Sqmm, 3.5 Core, (39 GI Strips - 4 x 0.8 mm) 32.20
Laying LTUG cable of 2.5 to 25 Sqmm (Single/3.5/4 Core) 20.05
Laying LTUG cable of 120 to 240 Sqmm (3.5/4 Core) 20.07
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site Normal soil 5/6'' Bore 28.01
Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm 59.01
Do- 240 Sqmm Copper Terminal, Apprx Wt: 218 Gm 59.10
Do- 400 Sqmm Copper Terminal, Apprx Wt: 395 Gm 59.12
Supply, Testing and commissioning of LT ACB 800 Amps 65.08
Repairs and Reconditioning of 11KV class single coil/multi coil Conventional (Aluminium wound) and 3/4/5 Star Rated failed Distribution Transformers of various Capacities and Conversion of CSP t...
Filtration of oil using filter set of the contractor to bring the insulation value to I.E. specification
EHV Grade unused uninhibited mineral insulating oil in new steel barrels of 210 litres capacity strictly confirming to IEC 60296 (latest version) ( greater than 170kV class) 1.15
Servicing of Air Circuit Breaker by isolating the breaker, cleaning of the ACB, cleaning of old grease, dust and oil content, cleaning of carbon from main contact terminal, cleaning of cluster contact...
Supplyof Three Phase 50 Hz, 7.5 KW/10 HP Monoblock Openwell submersible pumpset made of cast iron body, stainless steel strainer with 50-75 mm discharge outlet including transport to the site in Benga...
Erection charges of openwell pumpset. 13.3.19
Transformer Servicing: Draining out the oil from Transformer, Removal of cable box, Removal of Terminal cables, Replacement of Bushing gasket, Oil seals (3 bushing side), Refitment of cables, stopping...
Spreading and forming 20/25 mm Jelly to required level as per specification including cost of all materials, labour, lead etc., complete
Overhauling the Alternator of 500 KVA DG set: Dismantling the burntout Stator winding and Re-winding with 99.95% purity of copper coil and varnishing heating., Core re-rack and pressing, press out. Di...
Servicing of 250 KVA Diesel Generator including Draining out the lubricant, Removal of Terminal cables, Replacement of belts, gasket, Oil seals etc., filling of compatible lubricants, Refitment of cab...
Servicing of 500 KVA Diesel Generator including Draining out the lubricant, Removal of Terminal cables, Replacement of belts, gasket, Oil seals etc., filling of compatible lubricants, Refitment of cab...
Servicing of 600 KVA Diesel Generator including Draining out the lubricant, Removal of Terminal cables, Replacement of belts, gasket, Oil seals etc., filling of compatible lubricants, Refitment of cab...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender_Format.docx
Others - Tender Format • 0.01 MB
Tender Notification_Shanthinagar.doc
Others - Tender Notification • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .