Purchasing Hydraulic System Tipper for Collection of dry and Wet Guarbage at-Maan, Tal-Mulshi, Dist-Pune

Type of TIPPER :Garbage Tippe,Category of Vehicle for which Chassis to be used: Light Capacity Commercial Vehicles Type of Fuel: Diesel, Vehicle Emission Compliance: BS-VI Max Engine Power BHP(BHP@rpm): 65, Max Engine Torque (NM@rpm): 195 , Main Engine Aspiration: Turbocharged Chassis Cortication: ARAI, Chassis Cortication: ARAI/VRDE/ICAT No ARAI08908, At the time of supply of the equipment, the chassis should not be more than 6 months old Generic Parameters, Type of TIPPER: Garbage Tipper Make of Chassis: M & M,Type of Chassis Frame Conventional PRODUCT COMPARES PRODUCT HISTORY 1 Category of Vehicle for which Chassis to be Used:Light Capacity Commercial Vehicles, Type of Chassis with: Face cowl, Type of Fuel: Diesel, Vehicle Emission Compliance: BS-VI Fuel Consumption (Kmpl):17.2, Speed, Max (Km/Hr) :80 Max Engine Power BHP (BHP@rpm) :65, Rated RPM at Max Engine Power :3200, Max Engine Torque (N-M@rpm) :195 Rated RPM at Max Engine Torque :1400.22, Main Engine Aspiration: Turbocharged, No. of Cylinder in Main Engine (Nos): 4, Fuel Tank Capacity (Ltrs): 45 liter,Gradeability of Vehicle with load( %) :10.3, Ground Clearance (mm) :170 millimeter, Wheel Base (mm) :3150 millimeter, Kerb Weight (Kg) :1500 kilogram, Gross Vehicle Weight (Kg) :2700 kilogram PRODUCT COMPARE PRODUCT HISTORY, Chassis Transmission System :Manual, Number of Speed/ Forward Gears: 5, Type of Steering :Power Operated, Turning Radius,Min (mm): 5500 millimeter, Speed Governers/ECU :Yes ABS Fitted :No, Front Vehicle Brake :DISC, Rear Vehicle Brake :DRUM, Type of Clutch :DRY,Tipping Angle (Degree): 45 Tipper Container capacity/Volume(cubic/metres): 3CUM

Hydrualic System:- Consructional Parameters Size Of Front Tyres (mm) :195/80 R15 LT Size Of Rear Tyres (mm) :195/80 R15 LT Size of Wheel (mm) :381 millimeter Tipper body Pivot length (mm): 2350 millimeter Tipper body Length (mm) :2460 millimeter Tipper Body Height (mm) :1100 millimeter Overall Height of Tipper from Ground (mm): 2125 millimeter Body Plate Thickness (mm) :1.6 Main Frame Thickness (mm): 2 millimeter Hydraulic System :Yes, Tipping Hydraulic Cylinders(Make): MICROPARK, Hydraulic System Driven by :Main Engine Tipper Container Material :Mild Steel Thickness of sheet from tipper Collector Container Made (mm):2 millimeter, Dumping Height (mm): 950 millimeter Engine Oil Pressure Level Indicator in Control Panel:Yes Fuel Gauge Indicator in Control Panel: Yes No. Of Free Service (Nos): 3, Battery Warranty (Months): 12 month, Warranty Distance (Km)(Unlimited during warranty Period):Yes Motor-DC12Volt 1.6KV, Duty Type-83=7%, Oil Tak-8ltrs, Horizontal Mounting Gear Pump-3.2CC/Rev Pressure-110bar, Oil port - G1/4

Amarvishwa Engineering

PHINIX ENVIROTECH ENGINEERING

S S ENGINEERS