Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹31.7 L+₹88,943.14 (2.88%)Rejected-Finance C O KALIPADA MITRA SOUTH BHARAT NAGAR NEAR JAGDISH CHANDRA HIGH SCHOOL SILIGURI DISTT DARJEELING WB 734004 | JALPAIGURI | WEST BENGAL | 734004 | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹31.9 L+₹1.1 L (3.54%)Rejected-Finance A 9 117 KALYANI PO KALYANI KALYANI NADIA WEST BENGAL 741235 | NADIA | WEST BENGAL | 741235 | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹32.1 L+₹1.2 L (3.89%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹32.1 L+₹1.2 L (3.91%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Bagdogra
GE AF Bagdogra Bagdogra Airport PO, Dist Darjeeling, WB - 734421
WELCOME MAINTENANCE BR/ EM, CERTAIN CONNECTED WORKS AND REPAIRS TO ROOF, JOINERY, PLASTERING AND CERTAIN CONNECTED WORKS AT OFFICERS MESS ENCLAVE 20 WING AF STATION UNDER GE (AF) BAGDOGRA
2022_MES_530903_1
8434/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF Bagdogra
As per NIT
8 documents required · 8 mandatory
₹500
GE AF Bagdogra
₹62,000
Yes
1 Sept 2022
16 Jun 2022
21 Jul 2022
16 Jun 2022
20 Jul 2022
30 Jun 2022
Amount
M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall surfaces complete all as specified and directed.
All as per item No 1 here in above, but on ceiling surfaces complete all as specified and directed.
M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.
All as per item No 3 here in above, but on ceiling surfaces complete all as specified and directed.
M&L for complete removal of existing treatment of any description on old decorated wall surfaces and applying 2.0mm thick JK/Birla wall care putty and two coats of oil bound distemper over a coats of primer complete all as specified and directed.
M&L for preparation of old painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.
All as per item No 6 here in above, but on steel surfaces complete all as specified and directed.
Taking down cement plaster on brick wall surfaces including Racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of MoD land complete all as specified and as directed.
M&L for 15mm thick rendering on brick work or concrete surfaces in Cement mortar 1:6 finish even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over 2.0mm thick Birla/JK wall care putty over a coat of alkali resistant priming complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick with matching highlighter over 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Size and design/colour of tiles will be approved by GE) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed in Cement mortar 1:6 as in floor (Size and colour of tiles will be approved by GE) complete all as specified and directed.
M&L for vitrified ceramic tiles 10 mm thick (square /rectangular) polished light shade, area of each tiles not exc 0.36 sqm over and including 20 mm thick cement mortar 1:6 screed bed in floors set and jointed in neat cement slurry and pointed in white or coloured cement match complete all as specified and as directed.
M&L for vitrified ceramic tiles 10 mm thick (square /rectangular) polished light shade, area of each tiles not exc 0.36 sqm over and including 10 mm thick rendering in cement mortar 1:4 as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement match complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed.
S&F in repairs, 18/19 mm thick prelaminated particle boards, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.
S&F in repairs, galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repairs, 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beadings complete all as specified and directed.
S&F in repairs, Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and directed.
S&F in repairs, 1000 to 1400 mm long and 20 mm wide door seal incl 10 mm wide cotton complete all as specified and directed .
S&F in repairs, corner shelf of PTMT fixed with chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.
S&F in repairs, glass corner shelf with chromium plated guard and fixing arrangements complete of size 300mm complete all as specified and directed.
S&F in repairs, sheet glass shelf glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with chromium plated brass screws complete all as specified and as directed.
S&F in repairs, CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed.
S&F in repairs, CP soap dish fixed to wall with screw complete all as specified and directed.
S&F in repairs, brass chromium plated shower rose 125mm size with or with out swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs, 15 mm bore health faucet with 1 mtr tube & hook complete all as specified and directed.
S&F in repairs, 150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed.
S&F in repairs, 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed .
S&F in repairs, 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F in repairs, 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed.
S&F in repairs, 300mm , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs, 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repairs, 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repairs, 75 mm hasp & staple, safety type, aluminium anodised withmild steel steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repairs, 25mm dia, fancy type stainless steel drapery rod (curtain rod) complete all as specified and directed.
S&F in repairs, 25mm dia stainless steel decorative type bracket and side cups for curtain rods fixed with screws complete all as specified and directed.
S&F in repairs, 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed.
S&F in repairs, 200mm dia brass chromium plated towel ring complete all as specified and directed.
S&F in repairs, 140 mm length door stopper aluminum alloy body and tongue, anodized, with hard drawn steel spring, complete all as specified and directed.
S&F in repairs, ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
S&F in repairs, aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repairs, double action type floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot of brass, other parts made of Mild steel complete all as specified and directed.
S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.
S&F in repairs, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.
S&F in repairs, 15 mm bore chromium plated fancy type two way angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs, 15 mm bore chromium plated fancy type long boby bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs, 15 mm bore chromium plated fancy type two way bib taps with elegant knob screwed down high pressure complete all as specified and directed.
S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs, Chromium plated 15mm bore centre hole basin mixer with extended casted spout with 450mm long braided hoses fancy type complete all as specified and directed.
S&F in repairs, 15mm bore brass CP Wall mixer with long bend pipe for connection to over head shower and fixed complete all as specified and directed.
S&F in repairs, 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed.
S&F in repairs, 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed.
S&F in repairs, 25mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed
S&F in repairs, 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs, 32 mm bore PVC waste pipe for WHB/urinals 600mm long with union etc complete all as specified and directed.
S&F in repairs, 15mm bore Bib tap standard of PTMT(Minimum weight 90 gms) any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Make: Prayag or equivalent as approved).
S&F in repairs, ball valve 15mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).
S&F in repairs, ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).
S&F in repairs, ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).
S&F in repairs, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed.
S&F in repairs, CI bracket for WHB or kitchen Sink etc complete all as specified and directed.
S&F in repairs, 125 mm dia CP grating doom with or without waste hole complete all as specified and directed.
S&F in repairs, plastic water closet seat cover white/coloured closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.
S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cisterm, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs, flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level flushing cistern complete all as specified and directed.
S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, antishonage pipe and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.
S&F in repairs, wash hand basin vitreous china white, (flat back or angle back type) of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand including CP wate coupling and wate pipe complete all as directed.
S&F in repairs, Cascade type European water closet coloured floor mounted, with seat cover , seat cover hanging devices complete all as specified and directed.
S&F in repairs, PVC tank covers suitable for 500 litres to 2000 litres tanks complete all as specified and directed.
S&F in repairs, 75mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed.
S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed.
S&F in repairs, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repairs, Steel plate rack made of 1mm thick stainless sheet of overall size 900x 900x 250mm with providing necessary partition shelves & hanging arrangement etc as per manufacturer trade pattern and fixed to wall with wooden plug with brass chromium plated screws complete all as specified and as directed.
Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing complete all as specified and directed.
Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing complete all as specified and directed.
Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing complete all as specified and directed.
S&F 15mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 20mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 25mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F for 3-layer PP-R (P o l y p r o p y l e n e random copolymer) 20mm dia concealed pipes SDR 7.4 (PN-16) stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.
Dismantling 500 ltrs capacity water tanks complete all as specified and directed.
Dismantling 1000 ltrs capacity water tanks complete all as specified and directed.
S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.
S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.
Cleaning and removing all scale and dirt, etc. from 500 ltrs PVC tanks and from mouths of circulating pipes, etc. complete all as specified and directed.
Cleaning and removing all scale and dirt, etc. from 1000 ltrs PVC tanks and from mouths of circulating pipes, etc. complete all as specified and directed.
Demolition of brickwork/stone masonry built in cm including all quoins ,arches ,pillars, etc, but excluding ashlar facings ,dressed stonework and precast concrete articles complete all as specified and directed.
M & L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Repairing of floor mounted Cascade type European water closet including replacement of internal assembly (syphon, float valve, push buttons etc) of cistern and make it function in all respect complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for 18- 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 including rounding the edges complete all as specified and directed.
Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete along with fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets , removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc as specified & directed.
M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metallic bodies of luminaries/ fan at other end complete as per site requirement and all as specified & directed by Engr-in-Charge for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.
All as per ser item No. 99 above here in before but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per ser item No. 99 here in before but for One 5 Amp 5 pin socket outlet point on independent board.
All as per ser item No. 99 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes.
All as per ser item No. 99 here in before but one light point controlled by 2 way switches.
All as per ser item No. 99 here in before but one bell/buzzer point controlled by one bell push button on the same board with other switches or independent.
Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing capping/ PVC Conduit (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metallic bodies of luminaries/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and all as specified & directed by Engr-in-Charge for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size.
All as per ser item No. 105 above here in before but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per ser item No. 105 here in before but for One 5 Amp 5 pin socket outlet point on independent board.
All as per ser item No.105 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes.
All as per ser item No. 105 above here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.
All as per ser item No. 105 here in before but one light point controlled by 2 way switches.
Supply and Fixing bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.
Supply and fixing switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.
Supply and fixing in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.
Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish.
Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC.
Supply and fixing in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.
Supply and fixing in replacement surface and wall mounted LED batten 20 watt - 4Ft White with Aluminium housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt and all as specified and directed.
Supply and fixing in replacement surface and wall mounted LED batten 10 watt - 2Ft White with Aluminium housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt and all as specified and directed.
Supply & fixing in replacement LED light fitting 1x9W/ 1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size as per site requirement and all as specified and directed.
Supply and fixing in replacement energy efficient Street/ Roadway/Building Security Luminaries LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement and as specified and directed.
Supply and Fixing in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete.
Supply & fixing in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd all as specified and directed of approved make.
Supply & fixing in replacement exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete as per site requirement and all as specified and directed of approved make.
Taking down carefully copper/aluminium sub main wiring complete alongwith all connected accessories etc as specified & directed.
Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and capping will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.
Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Four runs of cables and two run of continuous earting cable drawn in conduit/ casing and capping will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.
Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty PVC casing capping upto 32mm or PVC conduit upto 25mm on wall surface/ recessed as required at site including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and caping will be measured as one length of sub main. (ii) PVC casing capping and its accessories is deem to be included in this item rates.
Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty PVC casing capping upto 32mm or PVC conduit upto 25mm on wall surface/ recessed as required at site including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and capping will be measured as one length of sub main. (ii) PVC casing capping and its accessories is deem to be included in this item rates.
Taking down carefully DB/ Sheet Metal Enclosure with existing MCBs complete & making good of disturb surfaces of wall/floors etc as specified & directed.
Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.
Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.
Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.
Supply and fixing sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified .
Supply and Fixing in replacement of MCB SP 6-32 Amps/ 40 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as specified & directed by Engineer-in-charge.
Supply and Fixing in replacement of MCB SPN/DP upto 32 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as specified & directed by Engineer-in-charge.
Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.
M&L in replacement submain wiring PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earth drawing through existing surface, casing/capping, recessed steel/PVC conduct complete as per site requirement and all as directed. (Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length).
M&L in replacement of submain wiring PVC insulated FRLS single core with stranded copper cable of size 4 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through existing surface, casing/capping, recessed steel/PVC conduct complete as per site requirement and all as directed. (Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length).
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridges complete all as specified and as directed.
Dismantling Plain or corrugated steel sheeting any gauge thickness incl Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling of wrought or mild steel work of any description or otherwise provided for complete all as specified and as directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but not exc 4 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed.
Taking down shutters of any description exc 1.00 sqm each but n.exc 2.00 Sqm all as specified and directed.
M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L - type of J - type or cranked hooks and bolts complete all as specified and as directed.
M&L for asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L - type of J - type or cranked hooks and bolts complete all as specified and as directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M & L for roof truess (framed) or trussed framed purlins, crane gantries rails and fastenings and heavy bracket framing (Beem, tee, angle, channel or flat sections) incl distance pieces, cleats etc in Fe-410-W (GdeE-250) quality B complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and as directed.
M&L for second class hard wood framed and fixed in scantlings clean swan complete all as specified and directed.
M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium fittings such as handles - 02 Nos, 100mm long hinges - 03 Nos, sliding bolt - 01 Nos, tower bolt - 02 Nos in each door, powder coated aluminium snap beading and rubber gasket, screws etc complete all as specified and directed. Note: Glass shall be measured separately.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading and rubber gasket, screws, powder coated aluminium fittings such as peg stays 150mm long - 01 Nos, telescopic hinges 75mm long - 02 Nos, suitable handle - 01 Nos etc in each shutter complete all as specified and directed. Note: Glass and wire mesh shall be measured separately.
S&F powder coated aluminium sliding window shutters with frames (consisting of 02 Nos glazed shutters and 01 No gauge shutter) Series -D (25mm), 3 track sliding shutters, duly fitted with neoprene beading, glazing clips, locking device, aluminium alloy handles, heat absorbing glass 5.5 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95 mm average width of aperture in gauged shutter, Powder coated aluminium ornamental grill 8 mm dia, 75 X 75 mm aperture fixed in powder coated aluminium snap beading/ 'C' channel in outer surface of the window frame complete all as specified.
S&F Solid PVC Double door frame of size 50mm x 120mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed..
S&F Solid PVC door frame of size 50mm x 45mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed..
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauzed (i.e. panel will be of stainless steel wire gauze in lieu of wood grain printed PVC sheet panel). The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. Note: Wire mesh in panels shall be measured separately.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face ,supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails suitable PVC sheet beading, and jointed together with solvent cement , supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F 2nd class hard wood plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint complete all as specified and as directed.
M&L for Treating ends of posts back of chowkats etc of area tarred exceeding 0.1 Sqm but n.exc 0.5 Sqm each with tar or coal tar black paint including sanding with clean sharp sand of newly tarred or painted surfaces complete all as specified and as directed.
S&F Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand all complete as specified and as directed.
M&L for PCC type C1,1:3:6 (using 20 mm graded aggregate) for holdfast blocks including necessary form work complete all as specified and as directed.
S&F 2nd class hard wood 35 mm thick factory made plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats with rail and stile as per IS-1003(part-1)klin seasoned and chemically pressure treated complete all as specified and as directed.
S&F 40mm thick flush shutters, factory made, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkats complete all as specified and as directed.
S&F 2nd class hard wood 35 mm thick glazed and skeleton shutter open rebated factory made and prepared to receive glass / gauge etc, (with out sash bars) edges of framing plain, chamferred or rounded and fitted with cut and mitred beads for securing gauge, size of members as per SSR Part - I section clause 8.20 (a) complete all as specified and as directed. Note: Wire mesh in panels shall be measured separately.
M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed.
S&F for 100mm long Stainless steel butt hinges, medium weight, cold rolled complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
S & F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing with complete accessories all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.
S&F 5.50mm thick sheet glass, ordinary quality and glazing any size complete all as specified and directed.
S&F stainless steel wire cloth, 0.254mm nominal dia of wire and 0.95mm average width of aperture and fixed with tinned tacks or galvanised wire staple etc complete all as specified and as directed.
Demolition and removal of existing Brick tiles or terracing tiles, single layer on roofs including Wire brushing and cleaning top surface of cement concrete, including flashings and junction of parapets, etc and removing debris/rubbish materials out side MoD land complete all as specified and as directed.
M&L for 25 mm average thick padding with plain cement concrete 1:2:4 type B0) using 12.5mm graded stone aggregate finished even & smooth without using extra cement complete all as specified and as directed.
M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 including laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.
S&F 40mm thick factory made designer door shutters, solid core construction with particle board core and covered with decorative face veneer with lipping on both sides and fitted to chowkats complete all as specified and as directed.
S&F 75mm long Stainless steel butt hinges, medium weight, complete all as specified and directed.
S&F 75mm hasp & staple, safety type, aluminium anodised withmild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 100mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 100mm long complete all as specified and directed.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details. 3. For measurement purposes in respect of those building for which audited periodical services measurement books are available; quantities shall be taken from PSMBs direct and entered in Measurement Book (IAFW-2261) and in respect of those buildings for which audited PSMBs are not available, detailed measurements of works shall be taken and entered in Measurement Book(IAFW-2261) in the usual manner.
M/S MANAS MITRA
M/S P K ROY AND CO
M/S SUNNY ENTERPRISE
M/s Chakraborty Enterprise
SUNIL DAS AND CO
M/S Banerjee construction co
SHRI P P SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .