Loading
Loading…
Loading…
Tender Value
₹24.5 Cr
EMD Value
₹24.6 L
Closing Date
15 Sept 2026, 12:00 pm6d left
Karnataka Power Transmission Corporation Limited
Muniraju
Establishing 2x20 MVA, 66/11kV substation at Hunasekatte village in Bhadravathi Taluk, Shivamogga District and construction of 66kV 630Sqmm UG cable LILO line from existing 66kV Santhekadur-Bhadra line to the proposed Hunasekatte Substation for a distance of 0.597Km and construction of 66kV line on 110kV DC towers on existing 66kV Santhekadur-Bhadra line for a distance of 0.811km Bhadravathi Taluk, Shivamogga District.
KPTCL/2026-27/SS/WORK_INDENT4088
KPTCL/2026-27/SS/WORK_INDENT4088
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for Clause No. 3.2(b)(i) of ITT (sub station)such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer.
Documentary proof for Clause No. 3.2(b)(ii) of ITT Transmission lines) such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer.
Cl.No.3.2(d)(A)(3) Qualifying Requirements for Power Transformer manufacturer as a Bidder: Shall upload Necessary documentary evidence for Cl.No 3(b) &(c) of Cl.No.3.2(d)(A)(3) issued from Utilities such as P.O. copies, LOA/DWA, Performance Certificates issued by the end users (Indian Government Power Utilities) not below the rank of Executive/Divisional Engineer, should be uploaded along with the offer.
The partner of the consortium who does not meet stipulated QR at 3.2 b(i) & 3.2 b(ii), such partner shall have minimum 3 years of experience in execution of electrical works as on the date of bid submission. Such partner shall upload the work award copies and performance certificates issued by the Government authorities/Power Utilities (end user) in support of the same
Clause no: 3.2(d) (A) (2) (a): The Cable Manufacturer shall be an ISO-9001/9002 certified manufacturer & should have minimum experience of not less than Five(5) years as on the date of bid submission in the design, manufacture, testing, supply of EHV cable of 66kV or higher voltage class as tendered, copper conductor, XLPE insulated, segmental compact type Milliken, lead/ corrugated aluminium sheath. Bidder shall upload documentary evidence such as i) P.O. copy (ii) Order completion certificate (iii) Test certificates in support of the same
Clause No. 3.2(d)-B-2-(a) of ITT: Documentary proof for minimum five years experience and two years successful opertaions of UG Cable accessories (i.e. Joints & terminations) - such as P.O, LOI/LOA, DWA, Performance Certificates issued by the end users (Utilities) not below the rank of Executive/Divisional Engineer.
Clause No. 3.2(d)-A-2-(b) of ITT: Documentary proof for minimum two years successful opertaions of UG Cable supplied in India- such as P.O, LOI/LOA, DWA, Performance Certificates issued by the end users (Indian Government power Utilities) not below the rank of Executive/Divisional Engineer.
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate in the prescribed format (Annexure-XX), Auditors Reports of the last five years preceding the date of bid submission of the Bidder & Consortium member(In case of Consortium)
Clause No: 3.6 of ITT: Assessed available tender capacity such as, i)existing commitments and ongoing works statement & countersigned by Employer in charge, not below EE or equivalent OR certified by CA/Cost Auditor & PO/Work Award copies ii) Self declaration iii) Certificate from CA for split details of Ex-works values and GST of Contract values of the works in the prescribed format as at Clause No. 1.5 of Section-3: Qualification Information by the lead Bidder and Consortium member(In case of Consortium).
clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities) :Bidder shall upload Bankers Certificate of lead Bidder & Consortium Partner (if applicable) duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4.
self-declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Lead Bidder & Consortium partner(in case of Consortium) stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Type test reports of Power transformer as per Clause No.(d) & (e) of Cl.No.3.2(d)(A)(3).
Undertaking-1 wrt to Type test reports & Dynamic Short Circuit test reports if Power transformer manufacturer participates as a Bidder.
Self-declarations of Lead Bidder & Consortium partner (In case of Consortium) in respect of Litigation, dis-qualification due to non-performance, Technical Snag for EHV UG Cable, Risk & cost clause and Restriction on border sharing as specified in Annexure- XVI& Annexure-XVII as per Clause No.2.4of ITT
Consortium Agreement
Power of Attorney in favour of all the persons signing the documents, Power of Attorney for Consortium, combined power of attorney signed by the signatories of all the members of consortium and copy of Resolution passed by BoD/ all the Partners of the Firm
Valid Super Grade (SGL) Electrical Contractors License of both Lead Bidder & Consortium partner (in case of Consortium) issued by the Government of Karnataka OR valid Form J-1 Verification Letter issued by Chief Electrical Inspectorate, Govt. of Karnataka to Other State Electrical Contractor License Holder for the highest system voltage specified in the tendered work or Valid Class A/Class-1 Electrical Contractors License issued by any state/central Government in India for Consortium partner (in case of Consortium) as on the date of Bid Submission
Certificate of Incorporation of the Individual/Consortium or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
The bidder and Consortium Partner(in case of Consortium) should have valid GST registration with GSTIN number PAN Card and ISO Certificates.Note The successful Bidder and his consortium partner who have GST registration in other States should have GST registration in the State of Karnataka mandatorily at the time of execution of the Contract Agreement.
No Deviation Certificate
Letter of Undertaking as in Annexure V
Qualification and experience of key Personnel proposed for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work
Undertaking to source the supply of equipment/material from KPTCL approved Vendors only
Undertaking to source the equipment/ material for the work from the Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as per Annexure -XVII.
Copies of original documents defining the Constitution or Legal Status, place of Registration and Principal place of Business of the Bidder (Lead Bidder & Consortium Partner)
Declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets
Information on litigations in which the Tenderer is involved as per prescribed format as at 1.12 of Qualification Information
Upload all relevant documents as per NIT, tender documents and technical specifications
Techno Commercial sheets duly filled
ISO-9001/9002 certificate of EHV UG Cable manufacturer
Clause No. 3.2(d)-A-2-(c)-Note(ii) of ITT: Undertaking jointly with Cable Manufacturers and Undertaking jointly with Cable accessories Manufacturers.
Clause No. 3.2(d)-A-2-(c): Cable manufacturer-type test reports and cable joint & terminations manufacturer-type test reports
If the bidder furnishes the Type test reports for 66kV UG Cable other than that of Copper conductor or Lead sheath then the bidder shall furnish an undertaking-4 stating that they would comply with IEC:60840 Range of Type approval and will conduct Bending test, heating cycle test and/or compatibility test on UG cable of same voltage class, design and cross section as tendered at their own cost at the testing houses mentioned above, before commencing deliveries without affecting delivery schedule.
If the bidder furnishes the Type test reports for 66kV UG Cable & accessories for different construction other than the one being tendered then the bidder shall furnish an undertaking-5 stating that they would comply with IEC:60840 Range of Type approval and will conduct partial discharge test on UG Cable and accessories of same voltage class, design and cross section as tendered at their own cost at the testing houses mentioned in cl. no. 3.2-d (A) (2) (c) above, before commencing deliveries without affecting delivery schedule.
In case if the test reports are not available for Special tests, then the Bidder shall upload an Undertaking-2B to the effect that, in the event of an order, the Bidder will conduct & submit test reports for Special tests of same voltage class, design & cross section as tendered, at his cost, without affecting the delivery schedule.
Clause No. 3.2(d)-B-2-Note-(a) of ITT: Undertaking-3 - Proposed manufacturers for EHV UG CABLE & UG CABLE ACCESSORIES(i.e. Joints & Terminations.
Undertaking-2: Deed of undertaking to guarantee Quality, timely supply, performance and Guarantee obligations as specified for UG cable
Undertaking-2A: Deed of undertaking to guarantee Quality, timely supply, performance and Guarantee obligations specified for UG cable accessories.
Undertaking from the Consortium partner having Valid Class A/ Class-1 Electrical Contractors License agreeing that, in case the Lead bidder failed to execute the contract, the consortium partner shall get the work done by the agency who is having valid SGL issued by GoK OR valid Form J-1 Verification Letter issued by Chief Electrical Inspectorate, Govt. of Karnataka to Other State Electrical Contractor License Holder for the highest system voltage specified in the tendered work and have executed similar nature of work earlier after duly obtaining approval from KPTCL as per the format of Undertaking-2
An undertaking w.r.t Cl.no 3.2b(iii) shall be furnished.
₹7,500
₹24.6 L
5 Sept 2026
5 Sept 2026
15 Sept 2026
15 Sept 2026
Station Supply Portion
Power Transformers: 20MVA, 66/11kV TRANSFORMER.
66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RT...
Nitrogen Injection fire extinguishing system-supply, erection & commissioning works etc., for 20MVA, 66/11kV Power Transformer as per technical specification
CIRCUIT BREAKER :
SF-6 Circuit Breaker with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structure arrangements with rigid, bi-metalic terminal connector complete sui...
ISOLATORS : 66kV, 1250 A, 40kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube, marshalling box...
iii)Upright mounting type without Earth switch LPH 6350mm.
11kV Isolators:
11kV isolator, Double break 400A, 25KA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR conductor for capacitor bank.
11kV Isolators:
11kV isolator, Single break 400A, 25KA capacity with Roaster Switch with bi-metallic terminal connector suitable for coyote ACSR Conductor for outgoing feeders
CURRENT TRANSFORMER :Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for or Drake ACSR conductor as per techn...
CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetalic terminal connector suitable for Drake ACSR conductor with marshalling box etc., complete as per technical specific...
11kV class, 25KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as pe...
VOLTAGE TRANSFORMER :
VOLTAGE TRANSFORMER 66kV Single phase, oil filled, outdoor type with rigid bimetallic terminal connector suitable for 63mm Al tube and marshalling box etc., complete as per tech...
SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:
i)60 kV, 10KA Metal Oxide with surge counter
Arrestor class : Discharge Class 3 (Station Medium
ii)9kV, 10KA class station class with connector and clamp
Capacitor Bank:
Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable n...
Control and Relay Panel:
Simplex 110 V DC compatible to SCADA complete as per technical specification
Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformit...
Control and Relay Panel:
Simplex 110 V DC compatible to SCADA complete as per technical specification
Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformit...
Total Weight of Fabrication, galvanising and supply of Mild Steel of Station structures and Mounting Structures.
Note :- Rate to be quoted on per tonne basis
Total Weight of supply of Bolts & nuts of of Station structures , Mounting Structures , Lightning Mast & street lighting.
Note :- Rate to be quoted on per tonne basis
11kV ODS and take off structure :
Supplying of Double pole structure with 9.5 Mts. RCC poles,145Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixing ...
Bus Bar Formation:
Moose ACSR Conductor
Rigid Bus with Taps & Clamps :
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter
b) 63mm size connecting isolator to vertical tap
ii)Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.
iii) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 66kV side
b)Expansion Type
iv) Corona Bell suitable for Aluminium Pipe of size 75mm on 66kV
v)End cap Suitable for 63 Al tube
i) Post insulators- Cylindrical solid core as per technical Specification
Solid Core Bus Post Insulator 66kV class, 1Unit/stack.
Post insulator clamp suitable for 63mm Al tube and 66kV solid core insulator
Auxiliary Transformer:
Station Auxiliary Transformer with Copper winding & oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2....
Double Pole Structure along with 9.5 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 10kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt &...
A) LTAC Panel (indoor),415 V as per technical specification comprising of voltmeter and ammeter, 1No. I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU + 2 nos. 3 Phase 32A O/G SFU + 14 O/G SFU, 6 nos. 3 Pha...
B) A.C. Distribution Box (Outdoor) :
AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G
MCB 16A + 1 O/G of 100A...
LT Power Cable:1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules :
a) 1.1 kV PVC Insulated 4X95 sq.mm Aluminium cable with glands / lugs / ferrules
STATION BATTERY:
110V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per technical specification
BATTERY CHARGER :
Battery charger suitable for 110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type with float cum booster type battery charger as per technical specification.
DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...
Copper control cables:
1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per technical specificaions
i) 19 Core x 2.5 Sq.mm.
ii)10 Core x 2.5 Sq.mm.
iii) 4 Core x 6.0 Sq.mm.
iv) 4 Core x 2.5 Sq.mm.
v) 2 Core x 2.5 Sq.mm.
vi) 2 Core x 6 Sq.mm.
(yard light-1000m+station -1000m)
vii)4CoreX25 sq.mm
viii)4CoreX10 sq.mm
11kV, XLPE Insulated UG Cable as per Technical Specification
a) 11kV Single Core, 1000 sq.mm Aluminium cable To be run from 66/11 kV transformers to 11kV switchgear).
b) 3X240 sq.mm Aluminium cable (To be run from 11 kV switchgear to 11kV take off DP structure)
c)3X95 Sq.mm Aluminium Cable( To be Run from 11kV Switchgear to Auxiliary Transformer)
d)ia Cable Termination kits suitable for 95Sq. mm 3 Core as per techincal specification.
d)ib)Cable Termination kits suitable for 95Sq. mm 3 Core as per techincal specification.
d)iia) Cable Termination kits suitable for 240Sq. mm 3 Core as per techincal specification.
d) iib) Cable Termination kits suitable for 240Sq. mm 3 Core as per techincal specification.
e)iiia) Cable Termination kits suitable for 1000 sq mm Single Core as per techincal specification.
e) iiib)Cable Termination kits suitable for 1000 sq mm Single Core as per techincal specification.
Equipments required for establing SCADA Communication as per KPTCL Specification
Note:1. Satellite communication required will be arranged by SLDC
a. Remote Terminal Unit (RTU) 64 (I/O) Port
b.Data Concentrator Unit (DCU)
c.2kVA online UPS (230V AC 1 phase 50Hz)
i)Current Cables - copper core with c/s 4.0sqmm multistrand 4 core
ii)Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core
iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core
iv)Control cables - copper core with c/s 1.5sqmm multistrand 10core
v)supply cables- Copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS and UPS to RTU, conforming to KPTCL specfications.
vi) supply cables-Copper core with c/s 32 Sq mm multistrand for battery conforming to KPTCL specification
Fire Fighting Equipments with necessary Mounting Stands
a. i. Mechanical Foam type extinguisher 50 Ltr. capacity
ii. Mechanical Foam type extinguisher 9 Ltr. capacity
b. Water type (gas pressure type) 9 Ltr. capacity
c. Carbon di-oxide type 4.5 kg Capacity
d.i Sand type G.I Buckets 15 Ltr. Capacity
ii. Steel stands for above to have 4 buckets to each stand.
MAINTENANCE TOOLS AND PLANTS
1.Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
2. Telescopic ladder Aluminium 6 Mtr. Height
3.Ring spanner set- 12Nos per Set
4.Tube spanner set- 12Nos per Set
5. Pipe wrench 24 inch
6. Pipe wrench 18 inch.
7. Hydraulic Crimping tools up to 1000 sqmm
8.Rubber hand gloves (15 kV tested)
9.Rechargeable 5W LED Hand Torch
10.Insulated cutting plier
i. 12 inch size
11.Insulated cutting plier
ii. 8 inch size
12.Line live tester
13.Screw driver 18"
14.Screw driver 12"
15. Hammer 8 lbs
16. Hammer 2 lbs
17. Chain pulley block 5 ton cap
18.Hydraulic jack 5T capacity
19.Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height.
21. Box spanners- 12Nos per Set
22.Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.
23.Insulation Tester Digital Type (megger) 2.5kV - 5 kV
24.Insulation megger 500 V
25.SF-6 Gas leak detector
26.Multimeter electromechanical
27.Multimeter Electronic
29.DC Voltmeter range -5V to + 5V
30.Hydrometer syringe suitable for vent holes
31.Specific gravity correction chart
32.wall mounting type holder for Hydrometer
33.Thermometer with wall mounting holder
34.Rubber appron
36.Protective goggle
37.Acid resisting jars (4 pint capacity)
38. Rubber shoes knee height
39. Glass funnel
40. Grounding sticks extendable upto 18 ft : 3 nos. of
each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set)
Miscellaneous items like rubber mats, first aid box, danger board, shock treatment charts, water filter door locks, fixograph, Sub station name board and other sundry items (size/capacities to be got ...
2.First aid box.
3.Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.
4. Water filter / Water purifier : Wall mounting type (Aqua-guard type).
5. Sub-station name board duly painted as per specification including erection & Civil Works
6. Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.
7.Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved)
8. Danger board ( prohibited ) with support structure including fixing in front of the gate
9. Equipments name plates and earthing name plates including fixing at outdoor yard
Furniture for control room, staff and maintenance, staff, godrej / featherlite / chandan make :
1.Steel Almirahs 6 1/2 feet
2.Steel Almirahs 6 1/2 feet with glass panel doors.
3.Officer's tables
4.Steel slotted angle rack (big)
5.Steel slotted angle rack (small)
6.Steel dust bins
7.Executive Revolving chairs
8.S type arm chairs
9.Steel folding chairs
Station yard lighting (outdoor):
i)Supply and installation/ Fixing/ Provision o f Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProo...
ii)Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...
Station Mandatory spares supply
Circuit Breaker (CB)
Closing coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB
Tripping coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB
Terminal Pad (For one Complete Circuit Breaker) for 72.5KV CB
Terminal Connector (For one Complete Circuit Breaker) for 72.5KV CB
SF6 Gas (40% of total gas Qty. of each Sub-Station) Sub-Station
Copper Contact fingers male & female (For one Complete Isolator for 72.5KV class)
Terminal Connector (For one Complete Isolator for 72.5KV Class)
Terminal Pad (For one Complete Isolator for 72.5KV Class)
Line Supply Portion
Grand Total weight of Tower parts- Mild Steel For splitup refer technocommercial sheet
Note:Rate to be quoted on per tonne Basis
Grand Total weight of Bolts,Nuts& Washers For splitup refer technocommercial sheet
Note:Rate to be quoted on per tonne Basis
Tower accessories :
Phase plate (Set of 3 No.)
Earth bond 450 mm long
Conductor and Ground wire:
Insulator Strings with Arcing Horns for Coyote Conductor:66kV line
NOTE: All the Insulator strings quoted by the bidder shall be of the same type i.e. all the Insulator strings shall be of Disc Insul...
Insulator Hardware:
A.Single Tension Clamp with hardware and arcing horn suitable for Coyote ACSR
C. Double Tension Clamp with hardware and arcing horn suitable for Coyote ACSR
Accessories for Coyote ACSR Conductor :
3.Repair sleeves
5.Vibration dampers
Accessories for Earthwire:
1.MSC Joint for Earth Wire
2. Repair sleeves for Earth Wire
3.P G Clamps for Earth Wire
4.Single Tension Clamp for Earth Wire
Cable Supply Portion
38/66 kV (Earthed), 1C X 630 Sq mm stranded,annealed, copper conductor, compacted circular,
conductor screen, cross linked polyethylene (XLPE) insulation, core screen, semi-conducting water
Outdoor type cable end termination suitable for 66kV, 1C X 630Sq mm, copper conductor,
XLPE insulated, lead sheathed cable as per technical specification
Insulated shield break type Joint suitable for 66kV, 1C X 630Sq mm, copper conductor, XLPE insulated, lead sheathed cable complete with all accessories as per technical specification
Normal Straight through Joint suitable for 66kV,1C X 630/240 Sq mm, copper conductor, XLPE
insulated, lead sheathed cable complete with all accessories as per technical specification
Single phase Link box outdoor structure mounting type, with SVL suitable for 66kV
630Sq mm UG cable including 240 Sq mm sheath bonding cable as per the technical specification.
66kV Three phase cross bonding Link box with SVL including 240Sq mm sheath bonding cable and
240/240 Sq mm co-axial cable as per technical specification suitable for 66kV 630Sq mm UG Cable. The Link ...
Three phase Link box without SVL including 240Sq mm sheath bonding cable and 240/ 240 Sq mm co-axial cable as per technical specification suitable for 66kV 630Sq mm UG Cable. The Link box shall be bur...
Surge Arrestor: 60kV Metal Oxide, gapless type with rigid bimetallic connectors suitable for coyote/Moose ACSR.
Arrestor class : Discharge Class 3 (Station Medium Duty (SM)) - for UG Cable
Terminal connectors to connect cable end termination to Coyote ACSR conductor , complete.
Terminal connectors to connect cable end termination to Moose ACSR conductor , complete.
OFC Cable & Accessories:
a)Unarmored Under Ground 48Fiber Optic Cable , Dual Window Mono Mode (48F DWSM) as per technical specifications.
Poly Vinyl Lubricated Bond (PLB) HDPE OD 40mm with accessories.
OFC end terminal (Line Interface unit LIU suitable for 48F)
Straight joint closure kit for OFC(48F)
Joint Box OPGW-OFC
Media converter
Cable Mandatory spares
Normal Straight Joints suitable for 66KV(E) , 1Corex630 sqmm, Compact Circular type copper conductor, XLPE insulated, Lead sheathed cable, complete with all accessrories as per the Technical Specific...
Insulated shield earthing Joint suitable for 66 kV, 1C X 630Sqmm, copper conductor, XLPE insulated, lead sheathed cable complete with all accessories as per technical specification
Three phase cross bonding Link box with SVL including 240 Sq mm sheath bonding cable and 240/240 Sq mm co-axial cable as per technical specification suitable for 66 kV, 630Sq mm UG Cable. The Link box...
Outdoor type cable end termination suitable for 66kV, 1C X 630 Sq mm segmental compact type
miliken copper conductor, XLPE, lead sheathed cable as per technical specification including PVC earthing
Station Erection Portion
Power Transformers:
66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first filling of ...
CIRCUIT BREAKER :
SF-6 Circuit Breaker with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structure arrangements with rigid, bi-metalic terminal connector complete sui...
ISOLATORS : 66 kV, 1250 A, 40 kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube, marshalling b...
11 kV Isolators:
11 kV isolator, Double break 400 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR Conductor.
11 kV isolator, Single break 400 A, 25 KA capacity wit...
a)CURRENT TRANSFORMER :Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for or Drake ACSR conductor as per tec...
11 kV class, 25 KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as ...
VOLTAGE TRANSFORMER :
VOLTAGE TRANSFORMER 66kV Single phase, oil filled, outdoor type with rigid bimetallic terminal connector suitable for 63mm Al tube and marshalling box etc., complete as per tech...
SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:
i)60 kV, 10KA Metal Oxide with surge counter
Arrestor class : Discharge Class 3 (Station Medium
ii)9kV, 10KA class
Control and Relay Panel:
Simplex 110 V DC compatible to SCADA complete as per technical specification
Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformit...
Erection of Station structure, Mounting Structures , Lightning Mast & Station Yard Light Structure (including Bolts & nuts) as per the directions of site Engineer -Total Weight
Note:(i) Rate to be quo...
C) 11 kV ODS and take off structure :
Erection of Double pole structure with 9.5Mts. RCC poles,145Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixin...
Formation of Main/ Cross Bus with Single Drake for 66 kV Bay
Note: Shall include Installing insulator strings complete with necessary Hardwares, stringing of the conductor etc.,
Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge.For splitup refer Technocommercial sheet
i) Aluminium pipe conf...
i) Post insulators- Cylindrical solid core as per technical Specification
Solid Core Bus Post Insulator 66 kV class, 1Unit/stack.
Auxiliary Transformer:
Station Auxiliary Transformer with copper winding & oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2....
Double Pole Structure along with 9 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 5kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt & nu...
LTAC Panel (indoor),415 V as per technical specification comprising of voltmeter and ammeter, 1No. I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU + 2 nos. 3 Phase 32A O/G SFU + 14 O/G SFU, 6 nos. 3 Phase ...
B) A.C. Distribution Box (Outdoor) :
AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G
MCB 16A + 1 O/G of 100A...
STATION BATTERY:
110V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per specification
BATTERY CHARGER :
Battery charger suitable for 110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type with float cum booster type battery chargeras per specification.
DC Distribution Panel (Indoor) as per technical
specification comprising of earth fault indicator,indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete
Laying of 1.1 kV Class Armoured Copper Control Cable/ 1.1 kV Class Armoured Aluminium Cable along with glands/lugs/ferrules as per specificaions.For splitup refer Technocommercial sheet
Laying of Scada Cable along with glands/lugs/ferrules For splitup refer Technocommercial sheet
11kV Switchgear:11kV, 25KA,MCVCB switchgear 1600A for incomer and 1250 A for feeders Out door type comprising of 2IC+12F+1BC+4CB+1AP (Remote annunciation cum Control panel) with CTs & PTs and ter...
Laying of 11kV, XLPE Insulated UG Cable For splitup refer Technocommercial sheet
Fixing of Termination kit/Indoor/Outdoor Pothead for 95Sq. mm 3 Core/240Sq. mm 3 Core
Fixing of Termination kit/Indoor/outdoor Pothead for1000 sq mm Single Core
Equipments required for establing SCADA Communication as per KPTCL Specification
Note: Satellite communication required will be arranged by SLDC
a. Site survey, wiring, installation,testing and commis...
b. Site survey, wiring, installation, testing and commissioning of DCU (DCU installation to be
done in RTU panel)
c.Wiring, Installation Testing and commissioning of UPS with batteries & cables
Integration of RTU, DCU and UPS with field equipments
Earth mat formation:
Supplying, Laying and welding of M.S.Flats 75X12 mm, welding and applying ACB paint to welded portion and covering with earth as per the drawing/standard specification and c...
Supplying and Grounding of Equipment with G.I.Flat 75X12mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of h...
Supplying and Providing 40mm dia M.S.Rod 1.075m long earthmat spikes including heating, bending top 50/75mm overlap flattening and making spike edge at one end driving into the earth below the ground...
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe using cast iron welding elec...
Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (nonpressure type) for earth pits including all lead and lifts etc.,
Check survey to be conducted during construction stage: Conducting detailed check survey along the approved route
duly following the route alignment, GPS Co-ordinates, submission of detailed line sche...
Conducting drone survey of transmission Lines for collection of data along with Aerial inspection of EHV Line corridor using LIDAR method for measurements of vertical, horizontal and ground clearances...
Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor
Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent...
Erection of Transmision Line Towers (including tower accessories,etc., except GI angle with Barbed wire & Grounding materials)
(i)The Bidders are required to quote the rates taking in to conside...
Tower accessories:
a. Supplying and fixing GI angle 45 x 45 X 5mm, 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mtr length each at inner and outer surface of tower to ...
Supplying and fixing Barbed wire as per Specification
c.supply and fixing of Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metrelong, salt, charcoal, inc...
Releasing of Owl Conductor
1)The rates quoted for releasing shall also include the charges for loading, transportation to KPTCL stores and unloading and applicable taxes.
Releasing of existing 110kV S/C Conventional towers to be dismantled A type tower Normal tower, kalpataru design -2nos
Cable Erection Portion
Surveying of cable route, excavation trial holes as per field requirements, preparation of cable route profile drawings for cable laying, final route alignment, marking lines and grades, preparation o...
Laying including Testing & Commissioning:EHT single core XLPE copper cable in trefoil,tapping, fixing pipes for drain and gate crossing as per drawings & specification in trench pipes,
ducts by pullin...
Handling and making normal straight joints/Insulated shield break type Joint for EHV power cables with all consumables at site etc., complete.
Handling and making of cable end termination for EHV single core XLPE copper cable outdoor/Indoor
Erection of single phase earth link boxes,(3Nos) both in S/s and on to the cable end termination structure connecting earth leads with all lugs, fixtures, clamps, bolts, and nuts completely.
Erection of three phase earth link boxes at joint bay with all connecting earth leads, all lugs, fixtures, clamps bolts, and nuts complete.(for Straight/Cross Bonds)
Erection of Surge arrestor Metal Oxide, gapless type with rigid bimetallic connectors suitable for coyote/Moose ACSR.-60kV 10KA, class -SM Heavy duty Metal Oxide type
Laying installation, testing & commissioining of 48 Fiber unarmoured Under Ground FO cable (48F DWSM) as per drawings & specifications.
Laying of PLB HDPE
OFC end terminal (LIU suitable for 48F)
Laying of Media Convertor
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe using cast iron welding elec...
Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (nonpressure type) for earth pits including all lead and lifts etc.,
Supplying and Grounding of Equipment with G.I.Flat 75X12mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of h...
Station Civil portion
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) in...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete...
Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...
30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.7...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer in charge.
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber b...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing PTMT Bottle Trap for Wash basin and sink: Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, ...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engi...
SUBMERSIBLE CABLE
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 63mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
ix) Control Panel BOARD-A:
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...
POWER CAPACITOR:
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...
Main connections:
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...
Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.32A
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32 A
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanica...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of greater than 200 N (as per ASTM E154), w...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Supplying & Laying cable trays including welding, fixing of supports Cable tray of 600 mm width
(suitable for cable ducts of A, B & C type)
Supplying & Laying cable trays including welding, fixing of supports Cable tray of 300 mm width
(suitable for cable duct of D type)
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection o Ov...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing andwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...
Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than ...
Supplying of recess mounting non integrated type LED down light 36W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...
Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK08 impact resistance suitable for surface and wallmounting applications.
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Extra length of GI pipe of class B 19mm dia for down rod.
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer in charge. Nominal concrete 1:3:6 or richer mix (...
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in charge.
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in ...
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Line Civil portion
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Cable Civil Portion
Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...
Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Supplying and Providing pre cast RCC Protection Covers using M20 grade Concrete, steel of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Providing and laying of warning tape / Caution tape / detector tape for HDPE pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant ISS with latest amendments with appurtenances....
Supplying and Providing Pre cast Cable Route/ Joint marker using M15 grade Concrete, MS rods of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the c...
HDD method for laying of 110 kV and 66 kV UG Cables: Installation of 3 rows of HDPE pipes PE 80 PN6 of 160 mm dia using Horizontal directional drilling technique (HDD method) including preparing and s...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Dense Graded Bituminous Macadam Grading - II for traffic less than 20 MSA: Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specifi...
Bituminous Concrete Grading II for traffic less than 20 MSA : Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, pre...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender document.zip
Tender Document • 68.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .