PROVN OF STORAGE ACCN FOR FURNITURE UNDER GE (AF) BAMRAULI

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out soft/loose soil.

M&L for cement concrete PCC (1:4:8) Type-D2, 40mm graded aggregate in foundation filling and mass concrete etc.

M&L for RCC (M-25 Design Mix) (20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for RCC (M-25 Design Mix) (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for RCC (M-25 Design Mix) (20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

M&L for RCC (M-25 Design Mix) (20mm graded stone aggregate) as in chajja etc complete all as specified and directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions , square, rectangular or polygonal for fair finished surfaces of concrete etc.

Use and waste of flat Form work to sides and soffits of floor or roof beams, beam hunching, girders, bressullers, lintels, cantilevers, shelves including supports over hankes, etc of plinth/roof beam and similar works vertical or better for fair finished surfaces of concrete etc.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, flat (Horizontal or sloping) for fair finished surfaces etc.

M&L for Formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M & L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M & L for Rendering 10mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finished even

M & L for Rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even

Returning filling in including spreading, leveling, watering & well ramming in layers n.exc 25 Cm in soft/loose soil.

Removing of excavated materials of soils n.exc 50M and depositing where directed at a level n.exc 1.5M above the starting point

M&L for hardcore broken stone of gauge n.exc 63mm deposited, spread, leveled in layers n.exc 15mm thick, watered and rammed to surface.

M&L for PCC type B-1, 1:2:4 (20mm graded aggregate) as in leveling course caping denching, bid block, cill etc complete all as specified and directed.

S & F TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.

S&F Mild steel TMT 6 to 8 mm cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia conforming to Fe 500.

M & L for 100mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregate complete all as specified and as directed by the Engineer-in-Charge

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint by using roller brush over cement wash with white cement complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc(Fe 410-W(Gde E-250) quality-A ) etc complete all as specified and directed.

S&F Mild screw bolt Machine made with hexagonal or square head at one end and screwed at another end or screwed at both end to be fitted with washer exc 10cm and n exc 15 cms long of shank dia 16 mm to 20 mm

M&L for Pre-painted galvalume aluminum zinc coating 275 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws as specified.

M&L for Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws as specified.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay,100mm black enameled tower bolt complete with glazing bars, dovetailed or welded complete all as specified and as directed by the Engineer-in-Charge

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0.

Supply & fixing only Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

Supply only 3mm thick sheet glass ordinary quality glazing with oil putty in metal or wooden beads in square n exc 0.5 Sqm in each pane all as specified and directed.

M&L for steel plain, black sheet of 2 to 3mm thick in steel door shutter covering to door chowkhats and similar works, cut to size, hole punctured including round head screws clout nails or rivet and fixed to steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles including angle iron chowkhats of 65x65x6mm, 3 or 4 holdfast each side of requisite size, 500mm of M.S sliding bolt of 16mm dia with hasp staple,2nos of M.S tower bolt of 500cm size all as specified and directed by the engr in charge

Surface dressing not exc 15cm deep ;including removal/cutting of grass, shurbs etc and removal of debries from the sites to a distance n.exc 50 mtr as directed/

Add to (or deduct from) last item for every 3 cm or part thereof above or below 15 cm average depth

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigments

M&L for30mm thick sand filling(cushioning) under floors including watering and consolidation, all as directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cment including forms, moulds, mitred stopped ends complete.

M&L for precast cement concrete 1:2:4 type C1 using 20 mm graded stone aggreagate as in landing , cover slab(for manholes, etc) chulla hoods, chajjas, water through, mangers shelves ansd similar articles set in CM 1:6 complete all as specifeid and directed.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-

(a) One light/fan/bellpoint controlled by one switch single pole one way

(b) one 3 pin 6 amp switch socket out let independent .

(c) one 3 pin 6 amps socket outlet on the same board with other switch complete .

All as per item No 39 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.

Supply and fix switch modular flush 10A single pole one way ISI marked

Supply and fix modular sockets 10 Amp 2 in 1 2/3 pin combined all as specified and directed.

Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked

Supply and fix modular sockets 16 Amp 2 in 1 3/5 pin combined all as specified and directed.

Supply and fix ceiling rose surface bakelite 60x25mm three terminal

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver complete all as specified and as directed.

Supply and fix exhaust fan 380 mm sweep metalic body copper bound including fixing and louver shutter 240 volt 50 Htz. complete all as specified and directed.

Supply & fix MCB DB SPN 4 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

Supply and fix MCB, single pole and neutral, 230 volts, 32 Amp rating, 'C' series fixed in DBs catered here-in-before.

Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Supply and Fix in replacement of 30W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB any capacity as incomer and 6 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

Supply and fix in repair MCCB 63 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate opt less attn. 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wire mesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways, with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SI Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Supply, laying, jointing & testing of underground LT cables XLPE insulated, PVC sheathed, aluminium conductors, multistranded, armoured heavy duty 1100 Volt grade cross sectional area 16 Sqmm 4 core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs.

S & F GI water tubing 40 mm bore 'light grade' galvanized, with all fittings like socket, union, elbow, bend, tees etc jointing and complete all as specified and as directed.

S & F LED Street Light 60/70 watt in new generation Energy Saving & Environment friendly light fitting which uses 36 No. high power LEDs as light source. Total LED lumens 9000 lm. Working lifetime of over 50000 burning Hours and it uses Active Power Factor Correction (APFC) electronic gear (electronic driver). Luminaire housing is of pressure die-cast alluminum alloy LM6 for housing (Heat Sink) for better heat transmission. It has IP65 protection. Operating Voltage range is from 100Volt to 265 Volt AC and Frequency range of 50 - 60 Hz. Fitting is suitable for an ambient temperature from -40 deg C to + 50 deg C and Humidity level of 10% to 90% RH complete.

Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected

Supplying, laying sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

M&L for street light pole bracket made of GI tubing 32mm dia light grade 1.5 meter long bend to shape at an angle 120 degree with necessary MS clamp, nuts & bolts etc, with one coat of red oxide and two coat of aluminium paint all as directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

M/S A M ENTERPRISES

M.R. ENTERPRISES

HIMANSHU TRADERS

M/s Techno India and Company

Pleiad Complex On

M/S SATISH KUMAR

M/S Shivam Industries