Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.6 LAccepted-AOC H NO 1346 SECTOR 13 P HISAR 125005 HARYANA | HISAR | HISAR | HARYANA | 125005 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹25.9 L+₹2.6 L (10.9%)Rejected-Finance HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD PIN 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹26.8 L+₹3.4 L (14.6%)Rejected-Finance AIRPORT ROAD SKALZANGLING LEH LADAKH 194101 | LEH LADAKH | LADAKH | 194101 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹30.9 L+₹7.5 L (32.3%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹34.5 L+₹11.1 L (47.3%)Rejected-Finance H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Jul 2023, 6:00 pmClosed
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
REPAIR REPLACEMENT OF FILTERS V BELTS AND SERVICING PERIODICAL MAINT OF DG SETS AT SECTOR B AND ADJACENT AREA UNDER AOR OF AGE EM II OF GE 865 EWS
2023_MES_601636_1
865/EWS(NIT-66)/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹90,000
Yes
14 Sept 2023
7 Jun 2023
11 Jul 2023
7 Jun 2023
4 Jul 2023
21 Jun 2023
Amount
M&L for Checking, Inspection, maintanance and servicing complete including replacement of unserviceable spare parts of the DG set (comprising of Engine/ Alternator/ Control panel) of the following capacity for smooth functioning complete all as per manufacturers instructions and all as directed by Eng in Charge A. (a) Checking of lubricating oil condition. (b) Checking engine for oil, water leakage and correcting the same (c) Checking of all the nut bolts of engine and alternator. (d) Checking of all belts and adjust the tension properly (e) Cleaning of air filters (f) Checking and readjusting the valve clearance (g) Change of Oil/Fuel filters and engine oil if necessary (h) Checking of starter motor battery and charger (i) Checking of cooling system and fuel system (j) checking of all power cables and AVR connections and mounting bolt tightness of alternator (k) checking the function of AVR genaral checks (l) Checking of control panel meters and gadgets functioning (m) Checking of all control and safety wirings B. (a) Checking of flexible coupling of engine and alternator (b) Cleaning of crank case ventilation pipe (c) Checking of injectors and fuel pump (d) Checking of alternator and carbon brushes of following capacity DG sets NOTE (1) Cost of Spare parts required will be paid and measured separately (2) Servicing/routine check up carried out through authorised service centre of manufacturer (3) Make of spare recommendation by auth service centre of manufacturer.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
S&F in replacement of Fuel filter Element (Primary & Secondary) for following capacity of DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
S&F in replacement of Oil Filter Element as per existing for following capacity DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge. Make :- Kirloskar/Mico/TVS
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
S&F in replacement of Air Cleaner Element (inner & outer) suitable for following capacity of DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
M & L for changing /toping up of best quality of engine oil 20W40 type for various type/capacity DG sets including removing of old burnt engine oil from DG Sets complete all as specified and directed by Engr in Charge. Veedol/ Castrol/ Valvoline.
S&F in replacement of 'V' belt for radiator/water pump suitable for following capacity DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
S&F in replacement of Dynamo 24/12 Volt for following capacity DG Set Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
82.5 KVA DG set
Supply only batteries distilled water for the DG sets at all area of Sector 'B', complete all as specified and directed.
Supply only batteries electrolyte for the DG sets at all area of Sector 'B', complete all as specified and directed.
S&F in replacement of fuel pipe with banjo bolt at both side suitable for following capacity DG sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
Supply only cotton waste for daily use for cleaning the DG sets complete all as specified and directed.
S&F in replacement of self starter for following capacity DG Set Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
S&F in replacement of water pump assembly for following capacity of DG sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
100 KVA DG set
82.5 KVA DG set
S&F in replacement of Turbo charger assy for following capacity DG sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
S&F in replacement of automatic voltage regulator (AVR) 24 volt suitable for following capacity of DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
M & L for taking out burnt winding of exciter of following capacity of DG Sets including re-winding copper wire of super quality, of existing size, No of turns, varnishing, heating complete including testing on full load to entire satisfaction of Engineer-in-Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
82.5 KVA DG set
40 KVA DG set
M & L Cleaning of radiator for following capacity DG sets by using Kerosene oil and radiator cleaning solution (Ready to Wash) by pressure of pump and brush and removing radiator from the Gen Set including taking to work shop, making necessary welding/brazing to the leakage and Re-assembling after painting of the same complete all as directed by Engineer-in-Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
Supply & fixing in replacement of DC wiring of digital control panels of following capacity of DG sets, complete all as specified and directed by Engineer-in-Charge.
1010 KVA DG Set
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
S&F in replacement of Fan Hub assembely for following capacity of DG Set Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
M&L for disconnecting the U/S DC alternator of following capacity DG Set, 3 Phase of approved make form engine, transporting to workshop dismantling it for repairing and rewinding by taking out burnt armature winding aleading the alternator coil with existing gauge/size of super enamelled copper wire, providing new insulation, sleeves, varnishing cotton taping etc reassembling the alternator complete including aligning with engine and testing in all aspects for smooth functioning all as specified and directed by Engr-in-Charge
320 KVA DG Set
250 KVA DG Set
100 KVA DG Set
82.5 KVA DG set
40 KVA DG set
Supply & fixing in replacement of Hose Pipe of following capacity of DG Sets complete all as specified and directed by Engineer-in-Charge.
1010 KVA DG Set
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG Set
82.5 KVA DG set
40 KVA DG set
Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 25x4 mm size GI strip as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.
S&F in replacement of lub oil pump suitable for following Capacity DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
320 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
S&F in replacement of Thermostate valve suitable for following Capacity DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
Supply and laying in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 120 SQMM 3.5 core complete all as specified and directed.
Supply and laying in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 150 SQMM 3.5 core complete all as specified and directed.
Supply and lay in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 185 SQMM 3.5 core complete all as specified and directed.
Supply and lay in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 240 SQMM 3.5 core complete all as specified and directed.
S&F in replacement of oil pressure gauge DG set of cap up to 1010 KVA complete all as directed by Engineer-in-Charge.
S&F in replacement of Synthetic Insulating mat of Size 2Mx1Mx10MM complete all as specified and as directed.
S&F in replacement battery cable assy. with copper conductor multistranded RED and BLACK colour 2 metre long 20 sqmm for connection to self starter unit to Battery unit complete.
S&F in replacement off load changeover switch 1000 Amps, 4 pole in sheet metal enclosure side front handle operated, cat No IHBFFE1000. Make-Havells or equivalent or L&T/Legrand complete all as specified and directed.
S&F in replacement off load changeover switch 800 Amps, 4 pole in sheet metal enclosure side front handle operated, cat No IHBFFE800. Make-Havells or equivalent or L&T/Legrand complete all as specified and directed.
S&F in replacement off load changeover switch 630 Amps, 4 pole in sheet metal enclosure side front handle operated, cat No IHBFFE630. Make-Havells or equivalent or L&T/Legrand complete all as specified and directed.
S&F in replacement off load changeover switch 400 Amps, 4 pole in sheet metal enclosure side front handle operated, cat No IHBFFE400. Make-Havells or equivalent or L&T/Legrand complete all as specified and directed.
S&F in replacement off load changeover switch 200 Amps, 4 pole in sheet metal enclosure side front handle operated, cat No IHBFFE200. Make-Havells or equivalent or L&T/Legrand complete all as specified and directed.
S&F in replacement of old unserviceable battery 12V 180AH with complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of Oil seal front and rearsuitable side for following Capacity DG Sets complete Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
M & L for Calibration of FIP including supply & fixing in replacement plunger, DV, governor wet O-Ring, Pin roll, barrel, Pin ball bearing spring, washer for following capacity of DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Sets
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
40 KVA DG set
Supply and fixing in replacement of Crank wheel suitable for following capacity of DG Sets complete Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engineer-in -Charge.
1010 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 VA DG set
82.5 KVA DG set
Supply and topping up of best quality antifreezing ,inhabitor (Coolant) liquid for DG Set of various capacity and locations complete all as specified and directed. Make : Castrol/ Veedol/ Valvoline.
S&F in replacement of battry terminal for DG Sets complete all as specified and directed by Engineer-in-Charge.
M&L for Prepration of Old Surface of DG Sets, preparing the surface by rubbing with fine emery paper and making the surface smooth and re-painting with two coats of super quality synthetic enamel paint by spray gun fully matched with its original colour and making good entire DG Set ( Engine, Alternator, foundation ,Diesel Tank and Radiator unit with canopy) and including marking SM/MES No on DG Sets with different paint maintaning colour code to the following capacity of DG Sets complete all as specified and directed by Engineer-in-Charge.
1010 KVA DG Set
320 KVA DG Set
40 KVA DG set
S&F in replacement of exhaust silencer of following capacity of DG Sets complete all as specified and directed by Engineer-in-Charge.
1010 KVA DG Set
750 KVA DG Set
320 KVA DG Set
250 KVA DG Set
100 KVA DG set
82.5 KVA DG set
Note : Make of spare parts to be replaced under this work and mentioned in relevant items in this BOQ here-in-before shall be of approved make and as per the manufacturer's recommendation of DG sets and other equipments.
national engineering
M/S NANCY ENTERPRISES
M/S NISSAR ALI
R B TRADERS
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .