RC Nanthankulam Anganwadi Thisaiyanvilai Re Tender

Amount

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, levveling, sectioning breaking clods etc., in all incidental charges etc., complete as per standard specification .

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm gauge hard broken including cost curing etc., complete as per standard specification.

Plain Cement Concrete 1:3:6 (one cement, three crushed Stone Sand (M- Sand) and six coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Brick work in cement mortar 1:5 mix (One part of cement, Five parts of sand) Using well burnt country bricks of size 8¾ x 4¼ x 2¾ including cost and conveyance of the brick at site including cost of cement and all other incidental charges and labour charges etc. complete for foundation and basement T.N.D.S.S.No.31

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).

Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force - per Quintol

RCC 1:1.5:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly including cost curing etc., complete as per standard specification.

Ceiling Plastering with cement mortar 1:3 (one cement Three sand) mix, 10mm thick and including cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortar 1:5 (One cement four sand) mix, 12mm thick and including cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Supplying and fixing of new ceramic tiles for flooring with good quality and colour with cement mortar 1:3 mix and pointing with white cement with same color pigments including all cost of materials to site and all labour charges etc., complete

Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Fabricating, supplying and fixing in positon of SOLID PVC DOORS without frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete

Colour washing to coats with emulsion paint including cost and conveyance of all materials to site and all labour charges etc., complete

MARISWARAN R (BID ID -1225913)