REPAIR/REPLACEMENT OF ALUMINIUM, WOODEN, UPVC AND STEEL JOINERY, CEILING, WALL PANELING, CURTAIN RODS AND CONNECTED WORK AT 3 BRD UNDER GE (AF) MC CHANDIGARH

Amount

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down shutter of any description not exceeding 1 Sqm each complete all as specified.

Taking down shutters exe 1 sqm but n exc 2 Sqm each complete all as specified.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows(two or three track sliding/openable) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Powder Coated aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including U sections, fixed to aluminium door/windows/ventilators complete all as specified and directed.

Material and labour for repair aluminium composite panel sheet of 4mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber basket complete all as specified and directed. Make :- Alstone/Alex panel/Armstrong/Euroboard.

Supply and fix 5mm thick float glass, tinted/smoked shape fixed to frame/shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fix for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and fixing brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed.

S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and directed.

M&L for providing cement concrete type C-0 (1:3:6) (using 12.5mm graded crushed stone aggregate) as in pressed steel door frames (backfill) complete all as specified and directed.

M & L for providing cement concrete type C-1 (1:3:6) (using 20mm graded crushed stone aggregate) as in hold fasts, complete all as specifed and as directed.

M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preperation of new wooden surfaces or old of any description and appying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified.

S&F for 35mm thick 2nd class hard wood factory made plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both side faces. The size of rail and site as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specifed and directed.

S & F for 30mm thick flush shutters, solid core construction, with block core plywood face panels, commercial type on both sides, chemically treated against termite infestation complete all as specified and directed.

S & F for 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

Supply and fix, butt hinges, 100mm long, mild steel with galvanised mild steel hinge pin, complete all as specified and directed.

Supply and fix, butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and directed.

Supply and fix 180mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws, complete all as specified and directed.

Supply and Fix, Aluminium anodised, barrel tower bolts 200mm long, powder coated, of extruded section and fixed, complete all as specified and directed.

Supply and fix, Aluminium alloy, anodised, Sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and fix 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 100mm in size fixed with screws complete all as specified and directed.

M&L 12mm thick glass reinforced gypsum (GRG) ceiling tiles of size 595 x 595mm of approved design fixed with powder coated (powder coating on web bottom only) GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm) and powder coated GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x 595mm with 4mm dia GI wire suspender including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrangement with grid size 60x120cm including taking down upto height 15 Metre complete all as specified and directed. Make : Diamond Brand TM/ Dexune/Everest.

Supply and Fixing for PVC Wall Lining any colour , texture consisting of 5mm thick single side prelam PVC sheet used instead of plain including PVC sheet fillet (U,C or L shape) by mean of solvent/nails/screws to make grid as per manufacturer instruction fixing on wall and including of taking down old PVC wall Panneling all as specified and directed. Note:- Make Approved by GE.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Supply and fix, plain sheet glass 5mm thick, ordinary quality, not exceeding 0.50Sqm in each pane fixed to aluminium door/window and iron frame including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed.

Supply and fix plain sheet glass 4mm thick, ordinary quality, not exceeding 0.50Sqm in each pane, and glazing with oil putty and securing pins, spring clips etc, complete all as specified and directed.

Supply and fix in repair 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Supply and fix in repair Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and fix in repair 180mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws, complete all as specified and directed.

Supply and fix in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Supply and fix in repair Aluminium alloy, anodised, sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and Fix in repair, powder coated door seal fixed with screws to any type of shutter , complete all as specified and directed.

Supply and fix in repair brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed.

Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightening with necessary arrangement and new screws and aluminium angle cleat , complete all as specified and directed.

Material and labour for repairing any type of aluminium/wooden window shutter and refixing in the same opening after resecuring its frame work by means of tightening with with necessary arrangement and new screws of by aluminium angle cleat , and roller for sliding window complete all as specified and directed.

M & L for filling siliconized sealant around steel/wooden frame of around rough cast wire glass 6.4mm thick to cover all side gaps of glass panes with suitable layer (approximate 20mm width in both side) by silicon Gun as per instructions by manufacturer to stop the water leakage from that portion including removing the existing treatment around the glass panes up to height 15mtr etc complete all as specified and as directed.

Taking down mild steel rolling shutters/collapsible steel gate of any size and description complete all as specified and as directed.

S&F 1.25mm thick steel rolling shutters without ball bearing as specified of push pull or manual type as specified, including top cover, anchoring rod, hasp & staple and one coat of primer and two coats of synthetic enamel paint; erected in position as indicated complete all as specified and as directed.

S & F collapsible steel gate, top hung, consisting of channel picket, piovted flat bars, top and bottom runners, brass handles etc, as specifed, erected in position and securing runners with holdfasts and bracket and one coat of primer and two coats of synthetic enamel paint, complete all as specifed and as directed.

Overhauling, servicing and realignment of rolling shutters of area not exc 12 sqm any type Gear operative or without gear including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed. (Note : - (i) Necessary arrangement of crane/moving ladder shall be made by the contractor with out any extra cost.)

Overhauling, servicing and realignment of rolling shutters of area exc 12 sqm any type Gear operative or without gear but not exceeding 25 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed. Note : - (i) Necessary arrangement of crane/moving ladder shall be made by the contractor with out any extra cost.

S & F factory made box type steel window composite type with double rebate pressed steel frame 80mmx60mm (peripheral) and 80mmx75mm (intermediate members) including grill using 10 sqmm bar, made out of cold rolled 1.25mm thick sheet having steel window/ventilators double shutter of MS tubular section of size 50mm x 20mm x 1.1mm thick fixed with box type hinges including 12mmx3mm MS flat as beading for glazed and wire shutter handle of 100mm MS hollow tubular section as beading for wire and putty for glazing shutter handle of 100mm size made out of Z section 01 no, MS stove enamelled black tower bolt of size 120mm, 02 nos, 150mm mild steel hooks and eyes, each shutter flat iron 40mmx1.25mm and 200mm long hold fast 04 nos each window including taking down existing window any description and any position any description and any position and making good of surface area of cill,soffit , jamb and necessary filling for frame and hold fast with PCC (1:3:6) type C 1 complete all as specified and directed.

M&L mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors etc.

M & L for Machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20 mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floor finishes etc complete all as specified and as directed.

M & L Machine cut kota stone slab flooring in patches 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20 mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floor finishes etc complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified.

M&L for Mirror polishing on horizontal or vertical portion of marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish incl refixing of marble/ granite/ Kota stone slab or pieces if required complete all as specified.

Demolition of brick work built in cement mortar in any position and in any location complete all as specified and directed.

M&L for Brick work with sub Class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 in any location, complete all as specified and as directed.

M & L for Brickwork bricks straight or curved to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 with liquid water proofing compound on brick/concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed etc. Note : Liqud Water proofing compound shall be measured & paid seperately.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer etc complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

Dismantling of post or struts ( wood ,steel, RCC) any section including taking out embedded portion and making good disturbed surface complete all as specified and directed by Engr-in-Charge.

S & F for steel roof truss ( Framed), trussed, purlins, crane gantries, rails and fastings and heavey bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe- 410-W Gde E- 250 complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings etc.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fix with self tapping screws as complete all as specified and directed.

S &F for Galvanised, corrugated mild steel sheeting with two corrugations side lap, 0.63 mm thick fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F Factory made Solid PVC moulded Door Shutter 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core , supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and Fix, Aluminium anodised, barrel tower bolts 150 mm long, powder coated, of extruded section and fixed, complete all as specified and directed.

M&L for clean sawn second class hardwood in frame work complete all as specified and directed by Engineer-in-Charge.

Dismantling timber fillets,posts,railing rafter, purlin,balusters, handrails and treads under 40 sqcm framed work in sectional area,complete all as specified and as directed.

M&L 2nd class hardwood Plain fillets(exc13 Sqcm n.exc 25 sqcm) square, rectangular or triangular in section, clean sawn, secured with nails or brads in repair.complete all as specified and as directed.

S&Fin repair Pre-laminated particle board 18/19mm thick, interior grade, pre laminated one side decorative choice lamination and side balancing white,fixed in frame, complete all as specified and as directed. Note :- Colour of Particle board Approved by GE.

S&F in repair 12 mm thick dark/light sunmica/Veneered decorative plywood (No. of ply 7), grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work Note :- Colour of veneer face Approved by GE.

S & F in repair 40mm width continuous (Piano) hinges mild steel, bright finish or electro galvanised complete all as specified and directed.

S & F in repair 75mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screwsetc complete all as specified and directed.

S & F in repair Brass knobs 35-40mm dia complete all as specified and directed.

M&L for teak wood Lipping 6mm thick fixed to 18/19mm board with nails complete all as specified and directed.

S & F in repair Self close auto cut hinges.

Material & Labour for buffing, polishing of stainless steel railing,verical posts(any size) made of hollow tubes, channels, plates etc., including welding, grinding,if required making good and fitting the same with necessary stainless steel nuts and bolts complete, on the top of floor or the side of waist slab with suitable arrangement.

Material & Labour for buffing, polishing of stainless steel computerized designed alphabets /writing letter/figures in (Block, Roman, Italic style or in Indian languages)/ holograms etc crafted from stainless steel (any size) including making good and refixed (if required) the same with adhesive or nuts and bolts at any height complete all as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with belding or necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

S & F for in repair stainless steel cuttain rod heavy type chromium plated with fixing brackets, stpos, roller ,latu etc complete all as specified and directed.

Taking down Aluminium chowkhats or frames with shutters without taking off shutters from frame exe 1.5 sqm and n.exc 4 sqm each complete all as specified.

Taking down Aluminium Window chowkhats or frame with shutters n. exe 1.5 sqm complete all as specified.

M&L for plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

Note:- Amount of credit of Rs. 72040.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

SHRI GANESH CONSTRUCTION CO.

M/s Bhagwati Enterprises