Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 LAccepted-AOC | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹11.0 L+₹10,487.50 (0.96%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹11.2 L+₹34,026 (3.13%)Rejected-Finance OLD PULL MADIYA JAIRAMPUR AZAMGARH AZAMGARH UTTAR PRADESH 276001 | AZAMGARH | UTTAR PRADESH | 276001 | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹11.3 L+₹42,031.10 (3.87%)Rejected-Finance | L4 | Rejected-Finance Not Lowest tenderer | |
| 5 | L5₹11.4 L+₹55,136.30 (5.07%)Rejected-Finance | L5 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
30 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (E) FZR Cantt
GE (E) FZR Cantt
CERTAIN REPAIR TO OTM ACCN IN GH AND FD HOSP UNDER GE (EAST) FEROZEPUR CANTT
2022_MES_551800_2
8036/GE/E/FZR/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
GE (E) FZR Cantt
Please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (East ) Ferozepur Cantt
₹24,000
Yes
20 Dec 2022
15 Nov 2022
2 Dec 2022
15 Nov 2022
30 Nov 2022
25 Nov 2022
Amount
Dismantling of brick tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and as directed.
Demolition mud in roofs, any thickness, including plastering and leaping etc complete all as specified and as directed.
M&L for Rendering 10 mm thick cement plaster on roof surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and as directed.
M&L for Polythene film 150 micron thick laid on roofs with 150 mm overlaps including a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and as directed.
M&L for Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.
M&L 80 mm thick average consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster etc complete all as specified and as directed.
M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed.
All as per srl item No 7 here-in-before but using old brick tiles retrieved from dismantling (Item No 1 here-in-before) including cleaning and removal of mortar from tiles complete all as specified and as directed.
Racking out of cement joints/pointing of bricks work or brick tiles laid flat in floor surface,chanels,roofs etc complete all as specified and as directed.
M&L for Flush pointing to brick tiles / tarracing tiles laid flat on roofs in cement mortar 1:3 complete all as specified and as directed.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed.
M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in c:m 1:6 complete all as specified and as directed.
All as per srl item No 12 here-in-before but using old bricks retrieved from dismantling under ser item 11 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and as directed.
Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for Rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Rendering 10 mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.
M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over and including 2mm thick wall care putty complete all as directed.
M&L for preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsion over and including 2mm thick wall care putty complete all as directed of any shade on walls surfaces
M&L for Preparation of new plastered surfaces of ceiling & applying two coats of white wash complete all as specified and as directed.
M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified and as directed.
All as per srl item No 23 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.
Taking down shutters of any description,exc.1.0 sqm and not exc.2 sq. m each and after repair refixing in same opening complete all as specified and as directed.
Resecuring, or easing & adjusting without taking down shutter exc.1.0 sqm and not exc.2 sq. m each complete all as specified and as directed.
Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each including removing from site to store or otherwise as directed complete all as specified and as directed.
S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified.
S&F for Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified and as directed.
S&F 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and as directed.
S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.
S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”
S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”
S&F Factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drg No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”
M&L for Mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and as directed.
Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed.
S&F 18mm thick Prelaminated particle board,flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelvesincluding 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and directed.
Dismantling wall and ceiling boards(fibre,pulp,insulation,etc.) or insulation boards/slabs/blanckets, any thickness,including cover fillets complete all as specified and as directed.
Supplying and fixing Gypsum board 12mm thick in ceiling fixed with screw of size 60cmx60cm placed in ceiling including aluminium anodised snap grid frame 605 x 605 mm for false ceiling including hanging arrangements complete all as specified and as directed.
S&F in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification & drawing complete all as specified and as directed.
Taking down aluminium door/windows shutters only (area exc 0.5 sqm but not exc 1.5 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket & new aluminium cleats of existing make and also refixing the locks & rollers in existing position with and including new screws including refixing the window shutters in same opening complete all as specified & directed.
Hacking out old broken glass (any thickness,size quality or description ) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
All as per Ser item No 46 herein above but exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and as directed.
Supply and fixed in repair hydraulic door closer of aluminium die cast body,designation No-3 universal type suitable for door shutter of 851 mm to 1000 mm weight between 61 Kg to 80 kg, etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixed in repair Brass mortice lock 75 mm, 2 levers, vertical type complete all as specified and as directed.
M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Preparation of old painted surface of steel and iron of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F PTMT butt hinges, 100 mm long and fixed with steel screwscomplete all as specified and as directed.
S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and as directed.
S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and as directed.
S&F Mild steel door handles, stove enameled black,medium wt 125 mm long and fixed with steel screws complete all as specified and as directed.
S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, medium weight 150 mm long and fixed with steel screws complete all as specified and as directed.
S&F 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified and as directed.
S&F Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and as directed.
S&F alluminium anodised handles 150 mm long fixed to doors complete all as specified and as directed.
S&F alluminium anodised tower bolts 100 mm long fixed to windows complete all as specified and as directed.
S&F in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and as directed.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and as directed.
S&F in repair butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and as directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Ditto all as per ser Item No70 herein before but fixed in repairs
S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and as directed.
Demolition of un reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.
M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, bed blocks,back filling in chowkhats, benching etc including necessary form work complete all as specified and as directed.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed.
M&L for 40mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor topping, surfaces finished even and fair without using extra cement complete all as specified and as directed.
M&L 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified and as directed.
Supply only 38mmx3mm glass dividing strips as in floors complete all as specified. (fixing included in item of floor topping).
Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cm(1:6),complete all as specified and as directed.
M&L for Light shade Vitrified ceramic tile 10 mm thick (square or rectangular) polishedarea of each tile not exc 0.36 SM in floors etc.., set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surfaces 300 X 200X 7 mm thick set and jointed in cement slurry and pointed in white or colour cement to match over and including 10mm thick back coat in CM 1:4 complete all as specified and directed.
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed.
All as per item No 83 here-in-before but 20 mm bore tubing.
M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified and as directed.
All as per item No 85 here-in-before but 20 mm bore tubing.
Fixing only,after cleaning old steel water tubing,15 mm bore and connections in new or old position using new fittings complete all as specified.(Note: Serviceable pipes obtained from item 83 to be reused).
All as per item No 87 here-in-before but 20 mm bore (Note: Serviceable pipes obtained from item 84 to be reused).
S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and as directed.
S&F 15mm dia CP Sink cock swan neck regualar spout with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed (Make: Prayag Cat No 9214 or equivalent make specified in particular specification.)
S&F in repair piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and as directed.
S&F in repair central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufaturers specification complete all as specified and directed.
S&F in repair Gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
S&F in repair 15mm bore bib tap standard of PTMT any colour screwed, for iron pipe ( minimum weight 15mm-90 gms) complete all as specified and as directed.
S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed, for iron pipe ( minimum weight 15mm-90 gms) complete all as specified and as directed.
S&F in repair 20mm bore stop valve of PTMT any colour high pressure screwed, for iron pipe ( minimum weight 20mm-92 gms) complete all as specified and as directed.
S&F in repair 15mm bore angle stop valve of PTMT any colour high pressure screwed, for iron pipe ( minimum weight 15mm-90 gms) complete all as specified and as directed.
S&F PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and as directed.
S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed.
S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.
S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and as directed.
S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks tripple layred (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and as directed.
S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed.
S&F Vitreous china wash down water closet pan ( pedestal pattern ), white/ coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed.
S&F PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. complete all as specified and as directed.
S&F 1mm thick stainless steel sink with dranage board, plugs, washers, PVC waste pipe, union, CP cuppling & cantilever brackets embedded in cement and sand mortar in wall, overall size 915mmx460mm bowl size 410mmx330mmx160mm as in repair complete all as specifide.
S&F Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and as directed.
S&F PTMT grating doom 100mm dia with or without waste hole (minimum weight 25gms) fixed in repairs complete all as specified and as directed.
S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union (minimum weight 40gms) complete all as specified and as directed.
S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and as directed.
S&F Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and as directed.
Taking down eaves gutters and rain water pipes( any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and as directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches complete all as specified and as directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.
M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and as directed.
M & L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) Qty of ploymer to be used 15% by weight of the cement. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repear this step after 24 hrs as required.(iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as specified and directed by Engineer-in-CHarge. Make : - Epoxy bonding agent shall be Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika or Equivalent as directed by Engineer-in-Charge.
DHAWAN CONSTRUCTION COMPANY
ABHISHEK AND COMPANY
Kissan contractor and engg works
M/s Bansi Lal
M/S CHAWLA CONSTRUCTION COMPANY
Chanana Engineers & Contractors
B.L. Chaudhri and Co.
A N CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .