PROVN OF 04 X TOILET BLOCK AT CERTAIN AREAS AND SPECIAL REPAIR TO LT PANEL AND ACB AT KANKINARA AT ESD KANKINARA UNDER GE N KOLKATA

Amount

Surface excavation not exe 30cm deep and averaging 15cm deep getting out in soft /loose soil complete all as specified and as directed

Demolition of Stone sett paving laid bedded and pointed in any mortar of any description or thickness

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth for foundation etc, n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

Material and labour for cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete all as specified and as directed.

M&L for RCC Foundations Type B1 1:2:4 (20 mm graded stone aggregate), including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete concrete all as specified and as directed.

M&L for RCC Foundations Type B1 (1:2:4 ) (20 mm graded stone aggregate) Columns, pillars, piers, posts and struts concrete all as specified and as directed.

M&L RCC 1:2:4 (using 20mm graded stone aggregate) in Slab supported on walls, beams and columns in floor, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete.

M&L RCC (1:2:4) (using 20mm graded stone aggregate) in Chajja complete.

M&L RCC 1:2:4 (using 20mm graded stone aggregate) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete.

Formwork to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n. exc 200 mm thk (horizontal or sloping) complete

Formwork to chajjas, troughs and similar items incl edges complete.

Formwork to sides and soffit of floor or roof beam, lintels, shleves including supports, etc. complete

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and Labour for 25 mm thick D.P.C to horizontal surface of brickwork with cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate ) including necessary formwork and applying evenly a coat of blown type bitumen @ 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed. Make for bitumene:- STP / Tikitar / Choksy Chemicals.

Material and Labour for sand filling under floor including watering and consolidation complete all as specified and as directed .

Material and labour for 100 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate for flooring complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floorscomplete all as specified and directed. Make:- Ultra tile / Anjali tiles / Nitco / Mehatab / Terra firma / Ecco scope./ M/S Stylish Precast Pvt ltd.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors laid over 15mm thick screed bed in CM(1:6) including set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles (300x300) x7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick backing layer/rendering in CM(1:4) complete all as specified and as directed. Make for item Nos. 22 & 23:- Kajaria / Asian Granito / Somany / VamoraGranito / Nitco / Orient / Jhonson

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 5mm thick cement plaster in Cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified & directed.

Material and labour for applying three coats of white wash on new plastered surface of wall including preperation of newly plastered surface complete all as specified and as directed . Make of lime:- Suryacem / Lovelycem / Birla white.

Material and labour for applying three coats of white wash on new plastered surface of ceiling including preperation of newly plastered surface complete all as specified and as directed . Make of lime:- Suryacem / Lovelycem / Birla white.

Material and Labour for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed.

M&L for Water proofing treatment with APP based standard membrane over PCC padding of roof with the following course of treatment:- (a) Apply bituminous primer @ 0.40 Kg/Ltr per sqm of the surface area including cleaning the surfaces (b) Apply APP plastomeric bituminous based mineral finished water proofing membrane polyster reinforced(4Kg/sqm) with 10 cm over laps and torch bonded at joints including surface preparation and after application of treatment as per manufacturers instruction complete all as specified and as directed. Make:-SIKA/STP/TIKITTAR DANOSA / STP / IWL.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified as directed. Make for item Nos. 30 & 31:- M/s Rajshri Plastiwood,/ Kumar Arch Tech Pvt Ltd, M/s Sintex India Ltd,/ HINDOPAN,/ Marino / Polyline.

Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. Make for item Nos. 32 & 33:-Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.

Supply and fix 100 mm long MS Butt hinge , medium weight , cold rolled complete all as specified and as directed . Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed . Make:-M/s Modern Fabricators, 23E , Radha Madhab Dutta Garden Lane, Kolkata -10./M/s BA Enterprises, south Stn Road, Agarpara (Salpatabagan), Kolkata – 109. /M/s Sen Harvic, Vora Building, 1st Floor, 50 Nakhoda Street Bombay. /M/s Multiwyn Industrial corporation 3-B, Camac Street, Kolkata – 16 /M/s Agew Steel Manufactures PVT Ltv 522/1, Outside Pachkuva, ahmedabad – 380002 /M/s Doorwyn Industries, 55 Dharmatala Road, Salkia, Howrah ( WB) /M/s Hopes Metal Industries Ltd., P-23 Transport Depot Road , Kolkata – 27 /M/s Ankur Industries, 726 Andul Road (Podra), P.O. Denesh sheikh Lane, Howrah – 711109./M/s Steel Engineers, 203 KabigururabindraNath, Kanchrapara , 24 Parganas(N) WB /M/s NCL Altek and Seccolour Ltd, Hyderabad /M/s Bihar Boddin&Engg work, Katihar (Bihar) / M/S GS Udyog / BA Industries.

Supply and fix 3.0 mm thk sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane, complete as specified and as directed. Make:- Saint Gobain, Modi Float, Triveni Float Glass, Crown, Prayag polymers / Pilkington Glass.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders as required complete all as specified and directed. Make for item Nos. 37 & 38:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and as directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

All as per item No. 39 above but 20mm bore.

Supply and fix wash hand basin , white , flat back of size 550 x 400 mm including brackets,, waste coupling, wasted pipe, 32 mm dai, etc complete. complete all as specified and as directed .

Supply and fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed. Make for item Nos. 41 & 42:- NeycerKermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed. Make:- M/S Johnson Padder / Hindustan sanitary ware / Millennium / Cera / Blue Star Polymers (Speed Flow) / Commander (Water Bird) / Hindware(Sleek) / Parryware(Slimline) / Prayag / Shakti Enterprises.

Supply and fix 15 mm bore pillar tap Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed .

Material and labour 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete.

Supply and fix 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed . Make for item Nos. 44 to 46:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

Supply and fix 32 mm dia waste coupling of PTMT full threaded complete all as specified and as directed .

Supply and fix PVC connection 15 mm bore with PTMT nut of length 600 mm complete all as specified and as directed. Make for item Nos. 47 & 48:- M/S Prayag / Polytuf / M/S SakPlast Pvt Ltd./ Shakti Enterprises

Supply and fix 20 mm bore gun metal gate valve with iron wheel head,screwed both ends complete all as specified and as directed. Make;-Zoloto / Leader / Kirloskar / veenus / Upadhayay / Shakti Enterprises.

Supply and fix 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed .

Supply and fix Grating doom 100 mm dia of PTMT ( Min weight 25 gms ) complete all as specified and as directed. Make for item Nos. 51 & 52:- M/S Prayag / Polytuf / M/S SakPlast Pvt Ltd./ Shakti Enterprises

Supply and fix Rotational moulded polythene water storage tank 500 ltr capacity, trippled layer, ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and as directed . Make:- Rotex /sintex, Polywel / SPL /Polycon /Diplast /Nilkand / Oriplast/ Jindal Jaipur

Supply and fix 50 mm dia High density polyethylene pipes ( HDPE ) of pressure rating 6 Kgf/ Sqcm fixed complete to walls , ceiling or in floors complete all as specified and as directed . Make:- Prince / Supreme / Jain pipes / Kisan / Reliance Finolex./ Prayag

Material and Labour for 75 mm thick plain cement concrete 1:3:6 type C2 ( using 40 mm graded aggregate ) as in plinth protection, laid in bays including filling joints with bitumen gola using 80/25 (1 part of bitumen mixed with 3 parts of sand) finish the surface even and fair complete all as specified and as directed . Make of bitumene:- STP / Tikitar / Choksy Chemicals.

Material and labour for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and as directed.

Material and Labour for applying two coats of cement based paint, first quality, on new wall surface including preperation of new plastered surfaces complete all as specified and as directed . Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

Material and labour for PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipe including packing under, and haunching against the sides of pipe after they are laid and tested complete all as specified & directed following 100 mm dia of pipes .

Material and labour for salt glazed stoneware drain pipe 100 mm bore with the requirement of IS 651-2007, class SP-1, bearing ISI mark,aid in trenches and jointed in cement mortar (1:1) and tested in repair complete all as specified and directed.

Supply and fix UPVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor all complete as specified .

Supply and fix 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and as directed .

Supply and fix 110 mm bore PVC (SWR) bend , any radius complete all as specified .

Supply and fix 110 mm bore PVC (SWR) Vent Cowl complete all as specified .

Dismantling Asbestos Cement sheets as in roof coverings,wall,ridge,hips valleys and flashing etc for the building structures not exceeding 10m height from the average ground level complete all as specified and as directed

Supply and fix Pre-painted galvalume Zinc coating GI based corrugated steel sheet 0.50mm thick(total coated thickness) of any colour having tensile strength of 550Mpa as in roof coverings,fixed with using hot dip galvanised self drilling and self tapping screws complete as specified and as directed. Make of galvalume sheet-M/s spat industries ltd/M/s Tata bluescope &Steel Ltd(colour bond steel) or equivalent in M/s JSW Steel Ltd/M/s Bhusan Power &Steel Ltd. Note: sheet shall be coated with hot dip alloy of 55% aluminium,43.50% Zinc,1.50% diliconand finished with resin coat on both surfaces @ 150gm/Sqm of coating(total both surfaces) specified and as directed

Supply and fix in Pre-painted galvalume Zinc coating GI based corrugated steel sheet 0.50mm thick(total coated thickness) of any colour having tensile strength of 550Mpa as in ridges,600mm girth,fixed with using hot dip galvanised self drilling and self tapping screws complete as specified and as directed. Make of galvalume sheet-M/s spat industries ltd/M/s Tata bluescope &Steel Ltd(colour bond steel) or equivalent in M/s JSW Steel Ltd/M/s Bhusan Power &Steel Ltd. Note: sheet shall be coated with hot dip alloy of 55% aluminium,43.50% Zinc,1.50% diliconand finished with resin coat on both surfaces @ 150gm/Sqm of coating(total both surfaces) s specified and as directed

Dismantling of wall and ceiling boards(fibre,pilp,insulation etc ) or insulation boards/slabs/blankets,any thickness,including over fillets complete all as specified and as directed

Supply and fix anodised aluminium snap grid frame work(size of 605x605mm) for false ceiling including suspenders/hangers 6mm dia GI wire(upto 1200mm length) adjusting level fixed to roof shads by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansio hold fasteners 12.5mm dia 40mm long complete all as specified as per manufacturers instruction

Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size grid mould(605x605mm as specified above) and fix in grid mould with necessary fixing arrangement , complete all as specified and as directed (Make: Everest/Rhino/charminar)

Demolition of brickwork built in cement mortar complete all as specified and as directed .

Complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and material and labour for applying two coats of oil bound distemper over a coat of alkali resistant primer to walls etc complete all as specified and as directed.

Preparation of old treated plastered surfaces of wall by washing, rubbing down cement base paint surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for one coat of synthetic enamal paint to wooden surface exceeding 10cm width or girth incl preparation of old painted wooden surfaces complete all as specified and directed.

Dismantling Framed timber scantlings 40 sq. cm and over in section, in any position

Material and labour for Second class hard-wood timber framed and fixed clean sawn in scantlings

M&L Preparing surfaces of wood and wood based materials,steel and iron work,new or old,of any description and girth, not otherwise described,and treated with tar or coal tar black paint

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed.

Taking down ceiling fan / exhaust fan from existing position of high rise shed/ bldg, dismantling blades and removing fan and blades complete all as specified and keep in safe custody/ in office store for refixing the same complete all as specified and directed by Engr-in-charge.

Hanging only ceiling fan and connecting up including provision of cable fromceiling rose or connector to fan complete all as specified and directed.

Hanging only exaust fan and connecting up including provision of cable fromceiling rose or connector to fan complete all as specified and directed.

Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS Unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light point controlled by one way switch complete all as specified and as directed. Make of cable:-Polycab / Finolex / Havells / KEI / HPL / Mescab / Standard / RR Kabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries.

All as per item No 83 One ceiling/ exaust / wall mounted fan point controlled by one switch and one regulator complete all as specified and directed.

All as per item No 83 One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per item No 83 One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

Material and labour for surface point wiring (surface type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N-caping / conduit pipe medium grade of suitable size but not less than 20 mm and accessories of adequate size to be fitted on wall / iron channel of shed with suitable size of fixing material such as GI wire of suitable size and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of GI box/ switch board, ceiling rose, PVC casing caping/ conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate.

Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt.all as specified and directed

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt.all as specified and directed

Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep all as specified and directed

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make of T/L fitting - Century LED Ltd Cat Part No. - KCCF0200 / Philips Cat Part No. - TMC 501 P 1xT-LED 22W P3241 / Wipro Cat Part No. - WIO921208 Make of LED T/L Rod - Century LED Ltd Cat Part No. - TWPP020C / Philips Cat Part No. - MAS LEDtube 1200mm 18W865 T8 I / Wipro Cat Part No. - LL13-181-65SE

Supply and fixing LED batten mirror light 9/10/12 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on including two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. Make: Centrury LED Ltd Cat part No - BWMP010C/ Wipro Cat Part No. - LL20-111-XXX-65-NE/ Philips Cat Part No. - WT202W LED6S NW PSU S2 PC.

Supply and fix LED bulk head light fitting 10/12 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking out old unserviceable fitting any type complete all as specified and directed. Make: Centrury LED Ltd Cat part No - HWAR012C/ Bajaj Cat Part No. - BIBWP 10W LED / Philips Cat Part No. - WT202W LED6S NW PSU S2 PC.

Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit/ casing caping of suitable size but not less than 20mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 2.5 sqmm cable one run of 2.5 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).

Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit/ casing caping of suitable size but not less than 25 mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 4 sqmm cable one run of 4 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unserviceable DB complete all as specified as directed. Make: C&S/ INDOASIAN / L&T / Havells

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way, including taking down the old unserviceable DB complete all as specified as directed. Make: C&S/ INDOASIAN/ L&T / Havells

Supply and fix MCB single pole & neutral 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed Make: C&S/ INDOASIAN/ L&T / Havells

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed.

Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed, for One light point controlled by one switch complete all as specified and directed. Note : (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting if any for wiring shall be measued and paid separately. Make of cable:-Polycab / Finolex / Havells / KEI / HPL / Mescab / Standard / RR Kabel. Make of Conduit:- Plaza / Presto Plast / Precision / M/S AGK Industries / Finolex.

All as per item No.64 above but, One ceiling/ exaust / wall mounted fan point controlled by one switch and one regulator complete all as specified and directed.

All as per item No.64 above but, One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

Supply and fix switch piano flush buttom 5 Amp single pole one way 240 volt all as specified and directed

Supply and fix socket out let 3/5 pin 5 Amp 240 volt.all as specified and directed

Matetial and labour for lamp holder PVC/Polycarbonate type with backplate suitable for battel fittings complete all as specified as directed

Supply and fix celling rose surface,3 terminal of min da 63.5mm and ISI marked all as specified and directed. Make for item nos.67 to 70:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting complete all as specified and as directed. Make of T/L fitting - Century LED Ltd Cat Part No. - KCCF0200 / Philips Cat Part No. - TMC 501 P 1xT-LED 22W P3241 / Wipro Cat Part No. - WIO921208. Make of LED T/L Rod - Century LED Ltd Cat Part No. - TWPP020C / Philips Cat Part No. - MAS LEDtube 1200mm 18W865 T8 I / Wipro Cat Part No. - LL13-181-65SE.

Supply and fixing LED batten mirror light 10/12 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on including two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size the old light fitting any type complete all as specified and as directed. Make: Centrury LED Ltd Cat part No - BWMP010C/Wipro Cat Part No. LL20-111-XXX-65-NE/Philips Cat Part No. WT202W LED6SNW PSU S2 PC.

Supply and fixing LED bulk head light fitting 10/ 12 Watt luminaires including LED light inbuilt driver prewired with electronic driver and all accessories fitted connecting up with three core flexible copper conductor cable of suitable size to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Centrury LED Ltd Cat part No - HWAR012C/ Bajaj Cat Part No. - BIBWP 10W LED / Philips Cat Part No. - WT202W LED6S NW PSU S2 PC.

Supply and fixing LED street light fitting 45 Watt, 230 V AC with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with surface mounting device LED 60 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on shed/ wall/ iron channel with suitable size of GI bracket of suitable size including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSP045C / Bajaj Cat part No. - BRTFG 45W LED I / Wipro Cat part No. - LR02-501-XXX-57-XX

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and dirceted. Bajaj / Crompton / Usha/ Havells.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way complete all as specified as directed.

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

Supply and fix Blanking plate for MCB DB complete all as specified as directed. Make for item nos. 76 to 79:-Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand / ABB/Hager.

Supply and fixing, commissioning, testing XLPE insulated PVC sheathed armoured heavy duty electric cable with aluminium conductor for working voltage upto and including 1100 volts, in duct / trenches, fixed to pole, wall/roof and make good including cable glands required size of aluminium thimble for making connection complete of size 6 sqmm 2 core complete all as specified and directed.

Supply and fixing, commissioning, testing XLPE insulated PVC sheathed armoured heavy duty electric cable with aluminium conductor for working voltage upto and including 1100 volts, in duct / trenches, fixed to pole, wall/roof and make good including cable glands required size of aluminium thimble for making connection complete of size 10 sqmm 2 core complete all as specified and directed. Make for item nos. 80 & 81:- M/s Havells / M/s Nicco / M/s KEI / M/s Polycab / Gloster / Universal) / HPL/ Dynamic cables / Finolex. / RR kabel / Mescab

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

Supply, install, testing and commissioning of MCCB 4 Pole , 415 V, Adjustable type, 160 Amps with breaking capacity 35/36 kA complete all as specified and directed. Make:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand / ABB/Hager.

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth strip of size 32x6 mm length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth strip protected by and including 40mm dia GI pipe (light grade), alternate layers of charcoal and salt, including 40 mm bore GI tubing length upto 7.5 mtr for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.

S&F Earth continuity conductor galvanised iron strip 32 x 6mm main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required including taking out old wire complete all as specified and directed.

S&F GI pipe 40 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

M&L for servicing of LT panel including replacement of burnt out lugs, scraping the bus bar chamber with evory paper, cleaning the bus bar panel, remove the burnt out electrical wiring and replacement of bolt, nuts, washer and new wiring for metering eqpt, phase sequence RYB with bus bar insulation tapes, heating with blower, reconnecting, testing and commissioning. Note:- (i) Cost of Nuts, bolts, washers, insulation tapes, wiring & other connecting items shall be included in unit rate. (ii) LT panel will be connected to new LT panel.

Supply and fixing, commissioning, testing XLPE insulated PVC sheathed armoured heavy duty electric cable with aluminium conductor for working voltage upto and including 1100 volts, in duct, wall/roof connecting with Transformer to LT ACB panel and make good including cable glands and aluminium thimble of suitable size for making connection complete of size 500 sqmm 3.5 core comlete all as specified and directed.

Supply and fixing, commissioning, testing XLPE insulated PVC sheathed armoured heavy duty electric cable with aluminium conductor for working voltage upto and including 1100 volts, in duct, wall/roof connecting with LT panel to APFC panel and make good including cable glands and aluminium thimble of suitable size for making connection complete of size 50 sqmm 3.5 core comlete all as specified and directed. Make for item Nos. 94 & 95:- M/s Havells / M/s Nicco / M/s KEI / M/s Polycab / Gloster / Universal) / HPL/ Dynamic cables / Finolex. / RR kabel / Mescab

Chases cutting in brick / stone / concrete surfaces gitrh, exc 10 cms and not exc 20 cms for concealed wiring and the like, making the surface good to match the existing in CM 1:3, etc complete.

Ultimate Solution Company

S S ENTERPRISE

Kanta International

PUJA ELECTRICALS

G D TRADERS

C. P. ENTERPRISE