SPL REPAIRS TO BLDG NO. E-363 (SINGLE JCOS LIVING), PROVN OF FOUR ATTACHED TOILET AND BATH ROOM FOR SM-02 SINGLE OR LIVING ACCN AND EXTENSION OF VARANDAH INCLUDING PCC FLOORING IN BLDG NO T-154, T-155 AND T-158 UNDER AGE B/R-2 OF GE GOLCONDA

Amount

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises and M&L for non skid coloured ceramic tiles 7-8 mm thick digital series (square/ rectanglar ) area of each tile exc 0.06 sqm but n'exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises and M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick set and and jointed in cement slurry and pointed with white or coloured cement to match , laid over and including 10mm thick rendering in cement mortar(1:4) as backing coat, complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors,approns laid, bedded and pointed any mortar etc and removing the rubbish from site complete all as directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size exceeding 1.50 sqm but not exceeding 4 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified

M & L for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as per specification and drawing all as specified and directed

M & L factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing complete all as specified and directed

M&L 2nd class hard wood plain framed panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed

S & F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc complete all as specified and directed

S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and directed

S & F Butt hinges extruded aluminum alloy with galvanized mild steel pin anodized 100mm type B22 complete all as specified and directed

S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed.

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed

S & F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S & F Aluminum anodized tower bolt of extruded section 125mm complete all as specified and directed

S & F Aluminum handle cast type 150mm size complete all as specified and directed

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed

S & F mild steel 200mm, ordinary rat tail rod pattern springs including roller and roller plate ( short type, fighter jet aeroplane shape type) complete all as specified and directed

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,three track etc complete all as specified and directed

S&F 5.5 mm thick glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and directed.

S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.00mm & fixed with stainless steel wire staples complete all as specified and directed

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.00mm & fixed with stainless steel wire staples complete all as specified and directed

Demolition of cement concrete (unreinforced) on roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work and M&L for Type E2 1:5:10 (Using 40 mm graded stone aggregate) in foundations, filling and mass concrete (sunken floor filling) complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:3 with WPC on fair faces of brick or concrete surface,etc completed all as specified. (WPC will be paid separately)

M & L for a coat of bitumen VG-10 @ 1.20 kg/sqm over a coat of bitumen primer 0.70 kg/sqm etc complete all as specified.

M&L APP modified pre-fabricated five layer water proofing membrane 3 mm thick not less than 3.60 kg/sqm complete all as specifed and directed.

Supply only integral water proofing compound

Taking up or down existing unserviceable mild steel water tubing and connections and Supplying and laying, connecting and testing steel water tubing of dia 15mm bore pipe medium grade ISI Marked and confirming to IS 1239 galvanised iron water tube with all fittings laid in trenches, fixed to wall or ceiling etc complete all as specified and as directed.

All as per Item No. 33 but 20mm bore

S&F of PVC (SWR) floor trap/Nahani trap plain with grating including jointing with solvent cement of dia of outlet 75mm complete all as specified and as directed.

S & F in repair Vitreous China wash down water closet pan(pedestal pattern) white ( including 'P' or 'S' trap connection to drain)or out going pipe and to flushing pipe anti shyfonic pipe etc completely fixed complete all as specified and as directed.

S & F plastic water closet seat , closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply and fixed for PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and as directed.

Supply and fixed in repairs for PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and as directed.

S & F Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including P or S trap set in and including concrete complete all as specified and directed.

S&F Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F 32mm Dia Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid for wash hand basin and urinal waste pipe complete all as specified and directed.

Supply and fix wash hand basin Vitreous china white ovel type size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F bib tap 15mm cast copper alloy with crutch or butterfly handle screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair bib tap 15mm cast copper alloy with crutch or butterfly handle screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixed in repair 15 mm bore two way Bib taps fancy type cast copper alloy Chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F angle stop cock 15mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for both end for iron pipe or for union and fixed complete all as specified and as directed.

S & F in repair angle stop cock 15mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for both end for iron pipe or for union and fixed complete all as specified and as directed.

S&F Concealed Stop valves , cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and as directed.

S & F tubular towel rail 20mm dia brass chromium plated D type 60cm between two flange complete all as specified and as directed.

S & F in repair tubular towel rail 20mm dia brass chromium plated D type 60cm between two flange complete all as specified and as directed.

S &F in repair shower rose CP fix to iron pipe 15mm complete all as specified and as directed.

S&F 15 mm CP wall mixer three way complete all as specified and as directed.

S & F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe complete all as specified and as directed.

S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F PVC waste pipe with complete fitting etc 32 mm dia complete all as specified and as directed.

S & F 15 mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and as directed.

S & F PVC connection 600 mm long 15mm dia with both ends bolt and cup of PVC water etc complete all as specified and directed

S&F in rapairs 15mm dia health faucet with 1.5 mtr tube & hook complete all as specified.

S & F for Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms), etc complete all as specifed and directed.

S & F in repairs Rotational moulded poly-ethylene multi-layer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S & F for Rotational moulded poly-ethylene multi-layer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S&F of Ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe complete all as specified.

Demolition of brick work or stone masonary, built in cement mortar complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M & L brick work with fly ash bricks built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius complete all as specified and directed.

M & L brick work with fly ash bricks built in 1:6 with Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in etc complete all as specified and directed.

M&L rendering fair faces of brick work 15mm thick in CM 1:4 and to be finished smooth and even with out using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick rendering in CM 1:3 on surface of ceilings finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for two coats of cement based paint over a coat of cement primer on newly plastered surfaces of walls including preperation complete all as specified and directed

M & L for three coat of white wash on new surface of wall including preparation complete all as specified and directed

M & L three coats of white wash on ceiling new plastered surface of walls including preparation of surface on walls complete all as specified and directed

M & L one coats of OBD on ceiling old plastered surface including preparation complete all as specified and directed.

M & L two coats of OBD on ceiling new plastered surface of walls including preparation of newely plaster surface on ceiling complete all as specified and directed.

M & L complete removal of existing treatmet of wall and applyying two coats of OBD over 1.5mm thick wall care putty complete all as specified and directed.

M & L for preparation of external wall surfaces and application of one coat exterior weather coat emulsion of following brands : (i) Asian Paints - Ultima Protek (ii) Berger Paints - Weather Coat Long Life (iii) Nerolac Paints - Suraksha superior protection complete all as specified and directed.

M & L for preparation of newly plaster external wall surfaces and application of tow coat exterior weather coat emulsion of following brands : (i) Asian Paints - Ultima Protek (ii) Berger Paints - Weather Coat Long Life (iii) Nerolac Paints - Suraksha superior protection complete all as specified and directed.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M&L for two coats of Synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or grith exc 10 cm including preperation of surfaces complete all as specified.

M&L preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 19 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work as in cubboard shutters complete all as specified and directed

M&L for 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed

S & F Aluminum handle cast type 75 mm size complete all as specified and directed

S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as spfd and directed.

S&F Hasp and staple 100 mm aluminium anodised, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

M&L Mirror Polished shahabad stone flooring with slab of thickness 20-25 mm,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 20mm thick screed bed in CM 1:6 including grinding and polishing making smooth surface of floor complete all as specified and as directed.

M&L for Mirror polishing on marble/grinite/ Kota stone/ stone work where ever required to give hihg gloss finish complete all as specified and directed.

Surface excavation n.exc 30cm deep and averagng 15cm deep and getting out any type of soil, etc complete all as specified and directed.

M&L for Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/Dense soil complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed.

M&L for reinforced cement concrete M25 Grade, Design mix, (20mm graded agg ) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for reinforced cement concrete M25 Grade, Design mix, (20mm graded agg ) Columns, pillars, piers,posts and struts etc complete all as specified and directed.

M&L for reinforced cement concrete M25 Grade, Design mix, (20mm graded agg ) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L for reinforced cement concrete M25 Grade, Design mix, (20mm graded agg ) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete M25 Grade, Design mix, (20mm graded agg ) Chajjas etc complete all as specified and directed.

Formwork to sides of concrete foundations, rough finished surfaces of flat concrete, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,etc complete all as specified and directed.

Formwork to,rough finished surfaces of concrete,square, rectangular or polygonal, sides of pillars, posts, struts, piers, columns and stanchions,etc complete all as specified and directed.

Formwork to,rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork to ,rough finished surfaces of flat concrete,soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as specified and directed.

Formwork to,rough finished surfaces of flat concrete, chullah hoods, chajjas,troughs and similar items including edges,etc complete all as specified and directed.

Formwork to,rough finished surfaces of concrete, edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,etc complete all as specified and directed.

Material and labour for mild steel TMT bars, 10mm dia and over,as in reinforcement, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and direceted.

All as per Item No 107 here-in-before but mild steel TMT bars, 6 mm to 8 mm dia ditto-

M&L for 25 mm thick Damp proof course in cement concrete 1:2:4 Type B-0 (Using 12.5mm crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base complete all as specified and directed.

M&L for non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles including 20 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished complete all as specified and directed.

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified.

S&F 2150mm x 600mm mirror with 6 mm thick plywood backing and powder coated aluminium framing complete all as specified and directed.

S&F brass Chromium plated 125mm size shower roses with or without swivel joints, any size, including fixing to steel pipe or union, etc complete all as specifed and directed.

Supply and fix 15 mm swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supplying and laying, connecting and testing steel water tubing of dia 15mm bore pipe medium grade ISI Marked and confirming to IS 1239 galvanised iron water tube with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, union etc laid in trenches, fixed to wall or ceiling etc complete all as specified and as directed.

All as per Item No. 118 but 20mm bore

All as per Item No. 118 but 25mm bore

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed

S&F PVC (SWR) bends any radius 75mm bore ccomplete all as specified and directed

S&F PVC (SWR) bends with acess door any radius 75mm bore complete all as specified and directed

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed

S & F for Grating round 75 mm size of CP etc complete all as specified and directed

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified and directed

S&F PVC (SWR) junction single, (SingleT), equal or unequal, with acess door 110mm bore complete all as specified and directed

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, bore of pipe in 110 mm, etc complete all as specifed and directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed

M&L salt glazed stone wave gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concrete complete all as specified and directed

Cutting in to existing manholes for connecting new drains making good to pipe 100mm internal dia and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section)in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate finished smooth and reforming benching complete all as specified and directed

S & F for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., size of frame 125 x 60 mm complete all as specified and directed

S & F for for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded, etc complete all as specified and directed

S & F for for Steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and directed

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed

M&L priming plastered roof surfaces with bituminous primer @ 0.3 Kg/sqm as per IS-3384 and providing water proofing treatment by applying mineral finish 3.5 Kg/sqm actatic poly propylene (advanced App torch membrane with fiber glass and finished on top with fiber glass mineral states torch incistern of thickness 3 mm by torch bonding complete over and including rendering 10 mm thick in CM 1:4 on concrete surfaces of roofs parapet etc, finishing to surfaces even and smooth with out using extra cement and providing necessary slope incl using WPC @ 3% or as per manufacturer instructions

M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,WHB platform over15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all spd and directed.

M&L PCC ,1:3:6 type C1 (using 20mm graded stone aggregate) as in side of path , finish even & smooth without using extra cement complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cememnt and pigment including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 using water proofing compound on wall of brick work or concrete surface, finished even and smooth all as specified and directed.

Supply only integral water proofing compound

M&L for providing concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe in PCC 1:3:6 type C2 (using 40 mm graded crushed stone stone aggregates) complete all as specified and directed.

M&L for Reinforced concrete pipes 150 mm dia class NP2 laid in trenches , jointed, pointed in CM (1:1) and tested complete all as specified and directed.

M&L for providing precast Reinforced cement concrete 1:1.5:3 , Nominal mix (using 20mm graded crushed stone aggregates) as in cover slab or similar works set & jointed in CM 1:4 complete all as specified and directed Note :- Reinforcement shall be measured & paid separately under respective item of Sch of works

PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in hold fasts and copings, haunching, kneelers, apex stones, bed plates and manhole kerbs and like rounded or chamfered where required complete all as specified and directed.

Excavation in post holes (or simlar holes) each n.exc 0.5 cum, in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for PCC work as in (1:3:6) type C-2 using 40mm graded stone aggregate in foundation filling & mass concrete for Post/Pillars etc all as specified and directed.

Cutting chases, brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed watertubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth etc.complete all as spd and directed.

M & L for 40 mm thick, Cement concrete type B-1,1:2:4 (20mm graded aggregate), etc finished even & smooth without using extra cement including Forming Contraction (Dummy) joints 40mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M & L for 20 mm thick, Machine cut kota stone slab flooring incl mirror polishing over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified.

M & L for 20 mm thick Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified.

S & F for MS tubular posts, tubular rafters and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 all as specified and directed.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-A,etc complete all as spd and directed.

S&F Pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / claddding to wall, fixed with self tapping screws as specified.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) including unserviceable fittings such as switches, ceiling roses, pendents, regulators, socket, light fittings etc complete and making good disturbed surfaces of walls, floors etc.complete all as specified and as directed

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed including 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

All as per Item No.159 but One 3 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed

All as per Item No.159 but One 3 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed

All as per item No.159 but for One 3 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed

M&L Point wiring for one light point/exhaust fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick,masonary walls,roof etc including in sunk box of required size & 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, including making good the disturbed surfaces to match with the existing specification complete all as specified and directed

All as per Item No.163 above but One 3 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed

M&L switch piano flush type single pole one way 5/6 Amps complete all as specified and directed

M&L switch socket combination flush type 5/6 Amps Multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and directed

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 & 15 Amps complete all as specified and directed

S&F in repair Bell push, flush type, 5 Amps complete all as specified and directed

S&F bell ding dong AC single pole 230 volts complete all as specified and as directed.

S&F Lamp holder PVC polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F ceiling rose, 3 point /PVC/polycarbonate, isolated body. complete all as specified and as directed.

Supply and fix Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed

M&L Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed

S&F 9 W LED bulb of base B22d with color temp 6500K all as specified and directed.

S&F in repair LED batten in 22 W decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly, energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F in repair LED batten in 9 W Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F in repair LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified and directed.

S&F 25W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high power LED, lens & toughened glass, potted driver and with efficacy of 120lm/W and with LDR Sensor, IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.

Supply and fix LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

S&F in repair bracket suitable for fixing of building security light fitting made out from 40 mm bore GI pipe, medium grade 1.5 to 2 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc complete including necessary nuts, bolts & washer etc as required and as specified and directed.

M&L Sub main wiring with 6 Sqmm (Nominal area) with two runs (Red for phase and Black for neutral) of single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor cables 1100 V grade drawn through and including PVC casing caping of adequate size but not less than 25mm width including 6 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor green in colour as earth wire and duly connected to earth point complete as specified and directed including taking down old sub main wiring. Note- One run PVC casing caping, two runs main cable and one run of earth wire shall be measured as one unit length.

S&F in repair Factory made board distribution in sheet steel enclosure vertical single door with 200 Amps rated bus bar, TPN, 4 ways, 240 Volts suitable for housing MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.

S&F in repair Factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 8 ways, 415 Volts suitable for housing MCBs complete all as specified and as directed.

S&F in repair MCB, Four pole, 240 volts, 63 Amps 10 KA C curve complete all as specified and as directed.

S&F in repair MCB, SPN, 240 volts, C Curve , 6 to 32 Amps 10 KA complete all as specified and as directed.

S&F in repair MCB, SP, 240 volts, 6 to 32 Amps 10 KA complete all as specified and as directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core 10 Sqmm cable flat or circular complete all as specified and directed.

Supply and fix House service bracket (hook type complete with 3.0m long G.I. pipe 30mm dia Med. grade, two nos 90 degree bends. M.S. hook and stay or guy complete all as specified and directed.

M&L, in repair, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.

S&F Exhaust fan, steel body, AC single phase, 230V, 300mm sweep with blades and frames and louvers complete all as specified and directed.

Cutting existing steel tubing of size 50/40mm dia for alterations or additions (Each cut measured) complete all as specified and directed.

Screwing existing steel tubing of size 40/50mm dia for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.

GNV Engg Services

NAVANAND ENTERPRISES

BUILDWEL