RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Class Room Desking/Seating ( 82 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement 1/4 (Allowed Values) GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING INTEGRATED DESK CUM SEATING Desking Configuration THREE SEATER THREE SEATER Length of Desking
RequiredSeating and Backrest (if provided) in mm (±10 mm) 1800 * DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Structure or Side Pannel 25.4 mm X 1.2 mm thick round ERW tubes - 31.8 mm X 1.2 mm thick round ERW tubes and 28.6 mm X 1.2 mm thick round ERW tubes ( As per IS : 7138 Latest ) welded together and hooks of 2 mm thick MS sheet with duly epoxy polyester powder coated min 40 - 45 microns thickness 25.4 mm X 1.2 mm thick round ERW tubes - 31.8 mm X 1.2 mm thick round ERW tubes and 28.6 mm X 1.2 mm thick round ERW tubes ( As per IS : 7138 Latest ) welded together and hooks of 2 mm thick MS sheet with duly epoxy polyester powder coated min 40 - 45 microns thickness Height of Desk Top in mm (±5 mm) 750 750 Width of Desk Top in mm (± 5 mm) 450 * SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 12 mm Thick Plywood Only * Material of Support Structure supports ( 4 Nos. ) provided at the rear back and understructure of seat made of 50.8 mm X 25.4 mm X 1.2 mm thick rectangular ERW tubes ( As per IS : 7138 Latest ) with duly epoxy polyester powder coated min 40 - 45 microns thickness supports ( 4 Nos. ) provided at the rear back and understructure of seat made of 50.8 mm X 25.4 mm X 1.2 mm thick rectangular ERW tubes ( As per IS : 7138 Latest ) with duly epoxy polyester powder coated min 40 - 45 microns thickness Material of Seat Cushion WITHOUT CUSHION WITHOUT CUSHION Width of Seating in mm (±10 mm) 550 * 2/4 Height of Seat in mm (±10 mm) 460 460 Width of backrest if provided in mm (± 5 mm) 470 * Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion
RequiredProvided without cushion
Requiredback support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1
Required2
Required3
Required4
Required5
Required6
Required7
Required8
Required9
Required10) Can be configured as per buyer's choice within offered technical details * Colour of finish As per buyer's choice * Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 300 * WARRANTY Warranty period in number of years 2 1
Required2
Required3
Required4
Required5 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.