Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.2 LAdmitted-Finance | +0.00% | ₹1.2 L | L1 | Admitted-Finance |
| 2 | L2₹1.2 L+₹1,177.15 (1.00%)Admitted-Finance | +1.00% | ₹1.2 L+₹1,177.15 (1.00%) | L2 | Admitted-Finance |
| 3 | L3₹1.2 L+₹2,354.30 (2.00%)Admitted-Finance | +2.00% | ₹1.2 L+₹2,354.30 (2.00%) | L3 | Admitted-Finance |
Tender Value
₹1.2 L
EMD Value
₹2,500
Closing Date
16 Sept 2026, 12:00 pmClosed
DY. CE S_D
Office of the DY. CE S_D chamber . KMC
Mfg. Supply and fitting fixing of base structure of vacuum pump with repairing plumbing works of Service pump and Vacuum pump with allied works at BDPS.
2026_KMC_1040560_1
KMC/DG (S_D)/BDPS/S-19M/26-27
Open Tender
MECHANICAL
Percentage
10 days
BDPS
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹2,500
25 Sept 2026
8 Sept 2026
18 Sept 2026
8 Sept 2026
16 Sept 2026
8 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying, fitting and
fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make
conforming to IS-15778: 2007 . with all necessary
accessories,specials viz.
socket,bend,tee,union,cross,elbo,nipple,longscrew, reducing
socket,reducing tee, short piece etc.fitted with holder bats clamps,
including cutting pipes,fitting, fixing etc.complete in all respect
including cost of all necessary fittings as required,jointing materials in
any position above ground. For Exposed Work
(i) CPVC Pipes Class-1, SDR-11 (Dia) 50 mm | 18 | Meter | 658 | ₹11,844 |
| 2 | Supplying, fitting and
fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make
conforming to IS-15778: 2007 . with all necessary
accessories,specials viz.
socket,bend,tee,union,cross,elbo,nipple,longscrew, reducing
socket,reducing tee, short piece etc.fitted with holder bats clamps,
including cutting pipes,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials in
any position above ground. For Exposed Work
(i) CPVC Pipes Class-1, SDR-11 (Dia) 25 mm | 29 | Meter | 208 | ₹6,032 |
| 3 | C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and
having all cast iron components as per I.S. 780/71 solid forged
bronze inside screw spindle having ultimate tensile strength not less
than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard
wear resisting, manufactured from best quality gunmetal conforming
to I.S. 780/71, painted black all over with asphalt base paint tested to
21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise
direction, fitted and fixed complete. (iii) 100mm | 2 | Each | 5,067 | ₹10,134 |
| 4 | FABRICATION, SUPPLY, STORING AT SITE, INSTALLATION &
COMMISSIONING OF TRASHRACK/ BAR SCREEN/ GRATING
CONFIRMING TO RELEVANT IS CODES ( IS: 11388, IS : 2062)
FABRICATED WITH STRUCTURAL STEEL SECTIONS SUCH AS
MS FLAT, CHANNELS, ANGLES ETC. INCLUDING COST OF
MATERIALS, MACHINERY, LABOUR, CUTTING, ALIGING,
WELDING AS PER APPROVED DRAWING INCLUDING
TRANSPORTATION CHARGES AS PER DIRECTION | 237 | Kilogram | 127 | ₹30,099 |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20
mm nominal size) excluding shuttering and reinforcement if any, in
ground floor as per relevant IS codes.(i) Pakur Variety | 4.96 | Cubic Meter | 4,482 | ₹22,230.72 |
| 6 | Plaster (to wall, floor,
ceiling etc.) with sand and cement mortar including rounding off or
chamfering corners as directed and raking out joints including
throating, nosing and drip course, scaffolding/staging where
necessary (Ground floor).[Excluding cost of chipping over concrete
surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster | 14.89 | Square Meter | 186 | ₹2,769.54 |
| 7 | Priming one coat on
steel or other metal surface with synthetic oil bound primer of
approved quality including smoothening surfaces by sand papering
etc (This item is applicable to new work or old work when the original
surface has been exposed by removal of old paint.) | 15 | Square Meter | 29 | ₹435 |
| 8 | Painting with best quality synthetic enamel
paint of approved make and brand including smoothening surface by
sand papering etc. including using of approved putty etc. on the
surface, if necessary :(b) On steel or other metal surface :With super
gloss (hi-gloss) -(iv) Two coats (with any shade except white) | 15 | Square Meter | 79 | ₹1,185 |
| 9 | Supply of Chlorinated Polyvinyl Chloride (CPVC)
pipes & fittings conforming to IS-15778: 2007Q) Ball Valve (c) 25mm | 4 | Each | 239 | ₹956 |
| 10 | Original
Works 12 Supplying,fitting and fixing check valve (horizontal) G.M.
tested to 21 kg per sq. cm.(vi) 50 mm | 2 | Each | 2,203 | ₹4,406 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.06 MB
TD.pdf
Tender Documents • 0.66 MB
BOQ_2555281.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .