REPAIRS TO WALL DRAIN PATH WOODEN FLOORING AND CONNECTED WORKS AT GTRE CDA DSC AND GE OFFICE COMPLEX UNDER AGE BR II RD EAST BANGALORE

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (unreinforced) removing debris outside MD land complete

M&L 75 mm thick cement concrete type B- 2, 1:2:4 (using 40mm graded stone aggregate) as in floor complete all as specified and as directed

Dismantling of aluminium partition / windows of any size and any description complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

M&L 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber/ aluminium frame work in cup board shutters / aluminium partitions etc complete all as specified and as directed

S&F pinhead sheet glass 4.8 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square exc. 0.5 sqm in each pane complete all as specified and as directed

S & F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets / frame work complete

M&L anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified

S&F 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)

S&F in repairs bird proofing net of net wire mesh size 20 mm x 20 mm complete all as specified and as directed

Supply & Installation BADMINTON WORLD FEDERATION (BWF) approved Wooden Sports flooring system "AIRFLEX SMASH®" that should be compliance with the Area elastic with total thickness of 75 mm comprising of 20mm Top Solid Wood followed by 45mm solid wood runner and 10mm Power Rubber Pad. Product top finish to have square Edge & Prefinished with sanding. The wooden flooring should have Eco-friendly manufacturing process with 100% sustainable and manageable plantation resource with raw material. The product should have been produced through Kilned and dried technology to maintain suitable moisture content. The top wood should necessarily be sourced from 100% sustainable resource. Structure of system should be 10mm thick rubber pad, 45mm thick pine runner with the width of 70mm, followed by the 20mm top flooring. Top wood plank sizes should be 20mm Thick, 130mm Wide and 1830mm length. Runners to be placed at a distance of 305mm C/C. Entire system should follow norms with the EN 14904(06/2006) and technical parameters for the product should have friction of 95 according to EN 13036-4, Shock absorption of 45% according to EN 14808, Vertical deformation should be 1.8mm according to EN 14809 and Vertical ball rebound should be 99% according to EN 12235. & European CE Marking.

Supply and Installation of European Origin Heterogeneous Sports Vinyl Flooring having thickness of 4.0mm, Lab tested product as per European norms. Technical Standards of Product is as per following and product is Solvent and heavy metal free: Surface Finish : Tech, Backing: Closed cell foam, Weight: 2.7 kg/m2 as per EN-430 Standards, Wear Layer density: 1.25 kg/m3, Roll Size: 2 Meter Width x 15 Meter Length ± 1%, Reaction to fire: C-fls1 as per EN 13501-1, Dimensional stability (L/C): 0.20%, Light fastness: 6 grade as per EN ISO 105-B02, Adhesion resistance of top layer: 50/50 N/50N, Abrasion Group: 'T' as per MSZ EN 660-1, Residual indentation: 0.2mm max, Chemical resistance: high resistance as per EN 423, Foot comfort, indentation after loading of 15 s: 0.4mm min, Slip resistance: class DS as per EN 13893

Dismantling of wooden flooring with scantling complete

Demolition of brick work or stone/ boulder masonry, PCC block masonry built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish outside MD land

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish outside MD land

M&L PCC in foundations, filling and mass-concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) complete all as specified and as directed

M&L for square rubble masonry brought upto courses, well bonded, bedded and solidly hearted built in CM (1:6) except stone complete all as specified and as directed

M&L for square rubble masonry brought upto courses, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and as directed

M&L plain cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and as directed

M&L precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed

M&L rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and as directed

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finishing the surface even and smooth without using extra cement complete all as specified and as directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc.

Add or deduct on item No 25 above for each 25 mm girth or part thereof over or under 30cm

Removal of silt, leaves, vegetation from drains of any de[th and width including taking out cover slabs of any thickness and placing back and making good the finishes and removal of sludge outside MD land complete all as specified

M&L precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290-0 Gde E-165

M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome

M&L 100mm thick PCC type B-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base / hard standing complete all as specified and as directed

M&L 100mm thick PCC type C-2, (1:2:4) using 20mm graded stone aggregate as in hard standing complete all as specified and as directed

M&L forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of old surface.

Demolition of stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removal of debris outside MD land

M&L rubber moulded chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment including Screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified and as directed

M&L precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed

Dismantling structural steel work including doors, gates but excluding framed truss etc.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290-0 Gde E-165

RAMYA CONSTRUCTIONS

Kaveri Enterprise

RAHUL ENTERPRISES

Moulya Builders

ARATHEERTHA CONCEPTS

GURU ENTERPRISES

Meghana and Gowda Enterprises