SPECIAL REPAIR TO BLDG NO PB 34 1 TO 04 SPECIAL REPAIR REPLACEMENT OF 150 CEILING FAN AGAINST BER AT 17 MTN DOU AND PROVN OF COMPOST MACHINE ALONGWITH ASSOCIATED INFRA AT BURDONG UNDER GE GANGTOK

Amount

Dismantling old PGI / CGI sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof / facia etc. complete all as specified and directed.

Dismantling wall and ceiling board (fibre pulp, insulation etc.) or insulation boards any thickness including cover fillets complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc. 1.5 sqm but n.exc. 4.0 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc. 1.5 sqm complete all as specified and directed

Taking down shutters of any description exc. 1 Sqm and n.exc. 2 Sqm each and removal from site.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n. exc. 15 cm thicness (un-reinforced) below or above ground level complete all as specified and directed .

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided complete all as spcified and directed.

Demolition of precast concrete block walling / brick wall built in cement mortar complete all as specified and directed.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 MPa as in roof covering fixed with self tapping screws as in roof covering complete all as specified and directed.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 MPa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.

S&F for Harrison rail, mild steel, chromium plated, 25 mm dia with fixing brackets, stops, rollers, nob, holder etc. in curtain rails complete all specified and directed.

Dismantling timber scantling 40 sqcm and over in section and in any position in section complete all as specified and directed.

M&L for 2nd class hard wood as in timber scantling, clean sawn, and fixed unframed work etc complete all as specified and directed.

S&F for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and directed.

M&L for plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S&F second class hardwood, glazed and skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section 8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F for factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2004) complete all as specified & directed.

S&F for 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, ild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for toprail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with uitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2010) Complete all as specified and directed.

S&F for Mild steel butt hinges 100mm long, medium weight, cold rolled complete all as specified and directed.

S&F for Mild steel butt hinges 75mm long, medium weight, cold rolled complete all as specified and directed.

S&F for 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed.

S&F for extruded aluminium alloy handles 150mm long, fabricated type, anodised complete all as spcified and directed.

S&F for extruded aluminium alloy handles 100mm long, fabricated type, anodised complete all as spcified and directed.

S&F for Aluminium anodised barrel tower bolts, 150 mm long, of extruded section complete all as spcified and directed.

S&F for Aluminium anodised barrel tower bolts, 100 mm long, of extruded section complete all as spcified and directed.

M&L for preparation of old wooden surfaces of any description over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F GI grid frame work for false ceiling comprising of the following sections for making partitions of 595mm x 595m size fixed to walls with rawl plugs & screws and hanged to roof with and including1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 28mm x 23mm x 0.30mm thick, cross tee shall be 24mm x 23mmx0.30mm thick and wall angle shall be 20mm x 20mm x 0.30mm thick complete all as specified and as directed.

S&F for 4mm thick Non asbestos fibre cement building board (E-board) of approved texture for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying one coats of oil emulsion distemper over a coat of primer including preparation of surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spcified and directed.

S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 all as specified and directed.

M&L for two coats of synthetic enamel painting to new steel surface over a coat of red oxide primer including preparation of surfaces area exc. 10cm width & girth complete all as specified and directed.

M&L for Dark / Light shade non skid tiles 7 to 8mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour incl 20mm thick screed bed in cement mortar (1:6) for laying floor/roof finishes complete all as specified and directed.

All as per item No. 37 here-in-above but in skirting with 7 to 8mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for glazed coloured ceramic tiles (350 x 250 x 7mm thick / 450 x 300 x 7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match the colour incl 10 mm thick screed bed / rendering of CM (1:4) as in wall all as specified and directed.

M&L for machine cut prepolished kota stone flooring slab flooring 20-25mm thick over cement screed 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed

M&L for 25 mm thick PCC (1:2:4) type B1 (20mm graded stone aggregate), finished concrete surfaces even and rough to receive floor finishes complete all as specified and directed.

M&L for pre cast cement concrete block masonry PCC (1:3:6) type C1 (20 mm graded aggregate) with solid blocks with 10 cm thick and settting in cement mortar (1:6) complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with Solid blocks, type C1 (1:3:6) (20mm graded aggregate) exc. 10cm in width and setting in mortar (1:6), complete all as specified and directed.

S&F extra long 6 Pin Metal Bathroom cloth hanger for hanging, clothes and towel etc. (40 cm long) complete all as specified and directed.

S&F 25mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides and fixed to chowkat SSR-2020 Part-I, Clause 8.20(a) complete all as specified and directed.

S&F ball valve brass 20 mm dia high pressure with polythene float and fly nut complete secrewed for iron pipe or brass ferrule etc all as specified.

S&F for Mild steel butt hinges 50mm long, medium weight, cold rolled complete all as specified and directed.

Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls / ceilings for tubing 15mm bore complete all as specified and as directed.

All as per item No 49.00 above but for Bore 20mm

M&L for steel tubing medium grade, galvanised with all fitting fixed complete to walls and ceiling or floor complete for this following :-

15 mm bore

20 mm bore

All as per item No 51.01here-in-above but fixing only.

All as per item No 51.02 here-in-above but fixing only.

M&L for Cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing conduit wiring etc. and making good, cutting n.exc. 10cm girth as in stone or concrete block walls complete all as specified and directed.

S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1.00mm thick for kitchen with plugs, washers and waste pipe, wasters, including cantilever CI brackets connecting union 40 mm CP waste fitting and PVC waste pipe with CP PTMT fly nuts of required length pipes etc. (overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm) complete all as specified and directed.

S&F in repair Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete of complete all as specified and directed

S&F in repairs for wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets, Indus Basin (white) or equivalent including 32 mm dia waste pipe with or without padestal all as specified and directed by Engr-in-charge.

S&F of PVC connections 15 mm size with PTMT nuts / brass nuts of length 600 mm complete all as specified and directed.

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float, handle, bracket, flush pipe etc. complete & connecting to WC complete all as specified and directed.

S&F of G I steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc. including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and directed.

S&F in repair 15mm bore chromium plated single lever basin / sink / wall mixer with 305mm (12'') extended body and 600mm braided connection pipe (without pop-up) complete all as specified and directed.

S&F in repair 15mm bore long body bib tap cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed of

S&F in repair 15 mm bore angular stop cocks with flange complete all as specified and directed.

S&F in repairs for 600 x 450mm looking mirror with aluminium channel frame, mounted on 6mm thick commercial plywood frame and fixed to wooden plug with chromium plated brass screws & cup washers incl glass self assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railling 60 cm long complete all as specified and directed.

M&L for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works n. exceeding 200mm thick for flat fair finished surfaces of conceter complete all as specified and as directed.

M&L for use and waste of form work to edges of concrete flats, treads, breaks in flooors, window cills, concrete railings, openings in concrete walls, floor and roofs exc. 10 cm but n. exc. 20cm wide complete all as specified and as directed.

M &L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in Slabs supported on walls including necessary form work complete all as specified & as directed. NOTE : Re-inforcement shall be measured and paid separately.

M&L for TMT bars, 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings / ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips.

S&F stainless steel plate rack of 1mm thick and size 750mm x 600mm x 250mm three tier complete all as specified and directed.

S&F in repairs tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges complete all as specified and directed.

Applying two coats of Dr. Fixit Fast Flex 113 of Dr. Fixit for sunken portion treatment all as per manufacturer instruction and as directed.

PCC (1:4:8) type D2 (using 40mm graded aggregate) as in filling & mass concrete complete all as specified and directed.

M&L 15 mm thick rendering plaster on fair faces of conc faces in CM (1:6) complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) in two layers of 10mm and 5mm (outer layer CM should be added with WPC) in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only).

M&L for 5mm thick in CM (1:3) in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for applying two coats of OBD over a coat of primer applied over providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth including complete removal of existing treatment and preperation of old / new surfaces preparing the surfaces even and smooth complete all as spcified and directed.

M&L for applying two coats of exterior acrylic emulsion painting over a coat of alkali resistant primer including complete removal of existing treatment and preperation of old / new surfaces complete all as specified and directed.

M&L for applying two coats of white washing including preparation of new / old decorated surface on walls complete all as specified and directed.

M&L applying one coat of white washing including preparation of new / old decorated surface of ceiling complete all as specified and directed.

M&L for 75mm thick PCC type C2 (1:3:6) (using 40mm graded stone agg) as in plinth protection / Path / hardstanding finished the concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred / stopped ends complete all as specified and directed.

S&F for PVC (SWR) 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or as in weephole with necessary clamps, bolt, bends, Tee etc complete all as specified and directed.

S&F PVC (SWR) 75mm access door bend complete all as specified and directed.

S&F for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.

M&L in repairs for PVC floor / Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (diameter of outlet 100mm) as in repair complete all as spcified and directed.

M&L for PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) as in coping complete all as specified & as directed.

Demolition/Dismantling and breaking up of drain pipes (AC, PVC or SWR or Reinforced cement concrete) of any dia (Internal), set in cement mortar including taking out from trenches and removing from site complete all as specified and directed.

Dismantling water tanks 500 ltrs capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position 500 ltrs capacity complete all as specified and as directed.

M&L Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:4) all as specified and as directed.

M&L for pre-cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in manholes covers etc including necessary form work and set in CM (1:4) complete all as specified and directed. Note :- Re-inforcement shall be measured and paid separately.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor having overall length 150 mm complete all as specified and directed.

S&Fsteel water tubing 50 mm dia 'medium grade', galvanised, with all fitting and fixed complete to as in spout pipe in sunken portion, fixed in repairs complete all as specified and directed.

S&F for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints, fixed to wall / laid under trenches complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) vent cowl fixed in position complete all as specified and directed.

S&F for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.

S&F PVC (SWR) 100mm access door bend complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc. 0.5 Cum getting out and removing surplus soil to a distance n. exc. 50m and making good surfaces in soft / loose soil complete all as specified and directed.

Surface excavation n. exc. 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L for hardcore of gauge n. exc. 63mm deposited spread and levelled in layers in n. exc. 15cm thick watered and rammed to true surface complete all as specified and directed.

M&L for 100mm thick cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in hardstanding / flooring / path etc. adn finishing the surface even and fair etc. complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided through and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L for formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides & soffits (if any) foundation and plinth beam, retaining wall for rough finished surfaces of concrete complete all as specified and directed.

E/M Portion Taking down carefully the old unserviceable aluminium / copper point wiring (light, fan, socket or power etc.) complete including fixtures and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings etc. and removing materials for taking credit and making good disturbed surfaces of wall floor etc. all as specified and directed.

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLSH) cable of working voltage 1100 volts grade conforming to IS 694 Pt-I & II of 2020 drawn in and including 25mm size PVC rigid non metallic conduit accessories (ISI marked) concealed in wall/fixed to roof ceiling etc & accessories with 1.60mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick bakelite sheet fixed with brass screws & cup washers including 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DBs or common earth dolly complete for light point / fan point / exhaust fan point / call bell point / controlled by one switch 5/6 Amp one way complete all as specified and directed.

All as per item No 110.00 above but for One exhaust fan / ceiling fan point controlled by one switch 5/6 Amps

All as per item No 110.00 above but for One switch socket outlet point 5/6 Amps on same board

All as per item No 110.00 above but for One switch socket outlet point 5/6 Amps on independent board

All as per item No 110.00 above but for One call bell / buzzer point controlled by one bell push

All as per item No 110.00 above but for One light point controlled by 2-way switchs 5/6 Amps

All as per Item No. 110.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4 Sqmm multistranded copper conductor wire FRLS PVC insulated and 4 Sqmm copper conductor wire FRLSH PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush button, single pole, one way, 5 Amps complete.

S&F switch piano flush button, single pole, two way, 5 Amps complete.

S&F bell push, flush type, 5 Amps complete all as specified and directed.

S&F ceiling rose surface bakelite 2/3 terminals complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5/6 Amps complete all as specified and directed.

S&F switch socket combination, 5-in-1, 5/6 Amps complete all as specified and directed.

S&F switch socket combination, 5-in-1, 15/16 Amps complete all as specified and directed.

S&F bell, AC, 230V, single pole complete all as specified and directed.

S&F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet / PVC etc. as required 240 volts, ISI marked complete all as specified and directed.

Supply & fix lamp holder angular / straight insulated body, with back plate suitable for batten fittings, white / ivory finish complete all as specified and directed.

S&F 250mm sweep PVC exhaust fan modular type, ventilus 10" model, 240 Volts, AC 50 Hz, with all accessories such as louvers, three core single core PVC insulated copper conductor of size 0.5 Sqmm from ceiling rose to fan, including cutting brick / block walls for fixing of fan and finishing the cutting surfaces even and smooth as per existing complete all as spcified & as directed.

Supply & fixing LED fitting 1 x 18 W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply & fixing LED fitting 1 x 9 W / 1 x 10W bulk head luminaries LED light dirver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

M&L for concealed sub-main wiring alongwith earth wire of size 2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire, ISI marked FRLSH, PVC insulated, multistranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for sunken boxes & making good to walls, floors etc. complete including taking down old unserviceable one all as specified and as directed. Note:

S&F in repairs sheet metal enclosure for 4 way Distribution Boards (DBs), triple pole and neutral double door with IP-43 protection suitable for fixing MCBs / Isolators after and including taking down old DB with MCB complete all as specified and as directed.

S&F in repairs MCB, Triple pole & neutral, 63 Amps, 240 volts, 'C' curve, 10KA complete all as specified and as directed.

S&F MCB DB SPN 8 ways double door, IP-42, IK-09 with metal door, rated bus bar, neutral links complete including blanking plates as required & fixed flush to wall / other surface complete all as specified and as directed.

S&F MCB single pole & neutral 40 to 63 Amps, 240 volts, 10 KA rupturing capacity, 'C' curve complete all as directed by Engineer-in-Charge.

S&F MCB single pole 6 to 32 Amps, 240 volts, 10 KA rupturing capacity, 'C' curve complete all as directed by Engineer-in-Charge.

S&F RCBO / RCCB for earth-leakage, overload & short-circuit protection, double pole, 40A, sensitivity 300 mA, 10 KA, ISI marked including indication of fault protection complete all as specified and as directed.

Taking down existing Geyser 25 Litre capacity and keeping in safe custody and refixing in new or old position complete after repair works including replacing hot & cold PVC connection pipes (01 No each) etc. complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of the plate not less than 1.5m below ground level connected to galvanised iron or steel earth lead wire 4mm dia size by means of nut / bolt and washer of galvanised iron or steel as shown in electricial plate No. 3 of SSR Part-I, 2009 including necessary excavation and earth work. GI pipe 20mm dia medium grade ISI marked for watering and GI pipe 15mm dia medium grade ISI marked pipe for protection of GI earth wire etc., PCC chamber with PCC (1:3:6), type C-2, precast RCC cover with reinforced cement concrete (1:2:4) type B1 (20mm graded stone aggregate) reinforced with 8mm dia TMT bar @ 150mm c/c both way with provision of 10mm dia MS bar handle, funnel, wire mesh, charcoal dust, salt etc. connected to DB as indicated including testing complete.

S&F EnvCurve Organic waste to compost Machine Model No. EC-WTC-250 of dimension (LBH) 6 x 3 x 5 ft (approx) of processing capacity 200 Kg to 2500kg, main mixing tank volume 1500 liters for 250 Kg reprocessing capacity, main tank, mixing shaft, mixing blade, waste inlet & outlet door SS-304 of suitable thickness, gear box helical gear, mixing motor 05 HP (01 No) RPM 1440, heating type thermic oil jacket type with moisture remover by high RPM Boiler including control panel with power backup 440V, 50 Hz, 3 Phase, 10 KW complete all as specified and as directed. Note :- Rate quoted include the cast of PCC foundation & necessary accessories required for Installation.

Supply, laying, jointing and testing in trenches or passing through pipe, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cable conforming to IS:7098 (Part-I)-1988, heavy duty with aluminium conductor of cross sectional area 25 Sqmm 3.5 core with necessary fixing arrangements such as lugs, glands and terminal etc. complete all as specified and as directed.

S&F MCCB 50 Amp of braking capacity 25 KA for existing panel rupturing capacity, 'C' curve for existing panel complete all as directed by Engineer-in-Charge.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 Sqm on plan and n. exc. 1.5m depth and getting out in soft / loose complete all as specified and as directed.

Returning filling in, including spreding, levelling, watering and ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and as directed.

Removing excavated material from the site to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified.

Supply and laying of DWC pipe, ISI marked in trenches or in cable ducts or fixed on walls, using clamps alongwith all accessories like socket, bend, couplers etc. conforming to IS : 14930, Part-II complete with fittingand cutting, joining etc. of size 40mm outer dia complete all as specified and as directed by Engineer-in-Charge.

M&L of earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.00mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) eith top edge of the plate electrode not less than 1.5m below normal ground level, connected to including galvanized iron strip size 32 x 6mm by means of bolts, nuts, and washers of galvanized ironor steel all as shown in electrical plate No. 3 of SSR Part-I connected to earth test point including provision of earth strip protected by 40mm dia light grade GI pipe & watering pipes shall be 20mm bore medium grade GI pipe including all excavation and earth work in any type of strata, PCC pit with RCC cover, CI frame, charcoal, salt & funnel etc. complete all as specified or indicated including testing on completion all as specified and directed. (Rate to be considered for earth strip to be fixed 7.5m long)

Taking down old UNSV ceiling fan, sealing cable end, dismantling blades and removing fan and blades and deposited to AGE E/M store yard complete all as specified and as directed.

Supply and fixing ceiling fans, complete with blades, down rods, elctronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

M/S ANIL KUMAR THAKUR

SANJAY KAUSHIK

KARMA SHERPA

BIJAY MITTAL

M/S MANOJ VERMA

RAAJ BANGAR

M/S S. S CHETTRI AND SONS

MAHENDRA KHAWAS