Electrical works for Up gradation of Indigenization Department

REMOVAL OF ITEMS: Removal, Dismantling, Shifting & Handing over of Cable terminations, PVC / MS conduit pipes with power wiring and telephone and LAN cables, LT Cables, power distribution board, lighting DB ,Switch Boards, Switch Socket Boards, Tempra sockets, Tube light fittings,2ft x 2 ft false ceiling lights from false ceiling/wall/ceiling with down rods etc and fire alarm detector,MCP and sounder as per the site condition and direction of in-charge engineer. The removal and shifting shall be done for above materials with all accessories complete.

LT CABLING: Supply & laying of 3.5 core x 95 SQMM Aluminium conductor armoured cable of 1100 V grade in existing trench /under ground trenches available or on surface of the wall / cable tray by supplying all required accessories including fixing as per site condition as directed by the EIC.Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

CABLE END TERMINATION: Supply and making of end joint kits suitable for 1100 volt grade XLPE insulated 3.5 core x 95 SQMM aluminium conductor armoured cables including supplying and fixing of required crimping lugs, etc, as per site requirement. The scope also includes making of end termination after making end joint kit. NOTE:- Crimping shall be done with hydraulic crimping tool. Make:Dowells / Jainson / Denson

MCCB / MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB / MCCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated with approved shade and partitions to segregate phases. The DB shall be concealed in wall along with cement patch work complete / surface mounted on wall with suitable iron angle frame & all fixing accessories as per site and inter connection with number sleeves & crimping lugs complete.Incoming and outgoing of the DB to be connected with existing cables and termination to be done properly in all respects as directed by EIC. make: Legrand 8-Way VTPN MCCB DB , Double door Incomer:. 1 No,160 A 4POLE (Icu=16 Ka) MCCB Out going: 06 Nos, 32 A ( Type 'C') TP MCB 06 Nos, 20 A ( Type 'C') SP MCB

MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated.The DB should be fixed concealed in the wall/mounted on the wall as per site with all the necessary inter connection complete in all respects. Incoming and outgoing of the DB to be connected with existing cables and termination to be done properly in all respects as directed by EIC. make: Legrand/Havells 4-Way VTPN MCB DB, Double door Incomer:. 1 No,63A 4 Pole ( Type C) MCB Out going: 12 Nos, 20 A ( Type 'C') SP MCB

MCB ENCLOUSER: Supply, fixing, testing and proving of 4 pole 32A 'C" curve MCB with suitable metal enclouser. The MCB box shall be concealed in wall including chipping of wall and concealing the enclosure with cement patch work and with necessary inter connections complete / mounted on surface of the wall/ pillar as per site requirement. Make:Legrand / L&T

MCB ENCLOUSER: Supply, fixing, testing and proving of 4 pole 63A 'C" curve MCB with suitable metal enclouser. The MCB box shall be concealed in wall including chipping of wall and concealing the enclosure with cement patch work and with necessary inter connections complete / mounted on surface of the wall/ pillar as per site requirement. Make:Legrand / L&T

POWER WIRING: Supply and laying of 4 runs of 4.0 sq mm and 2 runs of 2.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed in wall along with cement patch work complete/ on existing cable trays / on Aluminium partition or on the wall surface with end termination at DB/MCB including necessary inter connection complete etc as per site condition. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POWER WIRING: Supply and laying of 2 runs of 4 sq mm and 1 runs of 2.5 sq.mm for earthing 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed in wall along with cement patch work complete/ on existing cable trays / on Aluminium partitiom or on the wall surface with end termination at DB/MCB/switch board etc including necessary inter connection complete etc as per site condition. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POWER WIRING: Supply and laying of 4 runs of 6.0 sq mm and 2 runs of 4 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed in wall along with cement patch work complete / on existing cable trays / on Aluminium partitiom or on the wall surface with end termination at DB/MCB including necessary inter connection complete etc as per site condition. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POINT WIRING: Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm ISI marked FRLS PVC insulated flexible copper conductor 1.1kV grade concealed with suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including earthing the point with 1.5 sq mm FRLS PVC insulated flexible copper conductor single core cable and supply & fixing of 5/6 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall including cement patch work and all inter connection complete. Make: Havells / fincab / Finolex 2 Light points controlled by one switch 5/6 A modular type SP switch Make: Legrand/Siemens/L&T/GE.

POWER WIRING: Supply and laying of 2 runs of 2.5 sq mm and 1 runs of 1.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed in wall along with cement patch work complete/ on existing cable trays / on Aluminium partitiom or on the wall surface with end termination at DB/MCB/switchboard/etc including necessary inter connection complete etc as per site condition. Make: Polycab/Havells/Finolex only

MCB Enclosure: Supplying and fixing of 25A 240 V "C" curve DP MCB with metal enclosure concealed in wall including chipping of wall and concealing the enclosure with cement patch work and with necessary inter connections complete/surface/ recess complete with connections, testing and commissioning etc. as per the site conditions.Make:Legrand / Havells / L&T.

Providing of LED Light Fixtures: Supply, installation, testing & commissioning of Recessed Mounted 2 ft X 2 ft (36-40) watt LED Full out put Luminaries with CRCA power coated With high diffuser efficiency of 3600 lumens with necessary fixing accessories as per site & inter-connection complete Make: philips / CGL / Wipro /Havells / Bajaj

PROVIDING OF LED LIGHT LUMINAIRE: Supply & Fixing of 4 feet 2*20 Watt, Industrial batten with two numbers Industrial LED Tube lights on wall with necessary accessories. make:Philips/Wipro/CGL / FA /Havells / Bajaj

PROVIDING OF EMERGENCY LIGHT FITTING: Supply and fixing of (9 -12 ) Watt Emergency LED cirular/Square as per direction of EIC: Battery capacity should be minimum of 2200 mAH & Lighting back up time will be minimum 2 hours Makes: Havells/Crompton/Philips/ Orient/ Wipro/ Bajaj / FA / Ever ready

Provisioning of 1*20W LED tube light fittings: Supply and fixing of 4 ft 1*20W LED tube light fitting on existing wall/ roof with necessary fixing accessories complete as per site as directed by EIC. Make: Philips/CG/Wipro.

Supply and installation of surface mounted 10-12 watts circular/Square LED light fitting including necessary accessories as per the site condition. Make : Philips/Wipro/CGL/FA/BAJAJ/Halonix

Providing of Independent Modular Sockets & Switches: Supply and fixing of following items with 2 mm thick GI modular box independent including chipping of wall and concealing the box with cement patch work and with necessary inter connections complete. 3 No, 6 Amp 3/2 pin multiple universal socket controlled one no.6 Amp switch each & 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch. Make: Legrand/Siemens

PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 2 Nos 6/16 amps 3 pin multiple socket controlled by 2 No. 16 amps SP modular switch with indication light of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement.The box shall be mounted on concelled/ surface of wall / floor with all requred ccessories as per site condition. Make:Legrand / Crabtree

FLOOR BOX: Supply and fixing of 8 module matt aluminium finish floor box with metal flush mounting box with dummy plates including floor cutting upto a length of 02 meters for provision of 30mm dia PVC electrical conduit pipe concealed within the floor from the nearest wall and refilling with cement concrete neat finishing wherever required including labour charges and taxes etc., complete.Make: legrand / MK / GE / siemens

Modular Switch Board: Supply and fixing of 6 modular cover plate including 1 Nos 6/16 amps 3 pin multiple socket controlled by 1 No. 16 amps SP modular switch of approved quality, color & design shall be mounted on modular plate with suitable base with inter connection complete extra modules to be closed with dummy coverts as per site requrement.The modular switch board shall be mounted on concelled/ surface of wall /existing gypsum board with all required ccessories as per site condition. Make:Legrand / Crabtree

Supply and installation of minimum 50 × 25 mm rigid FR PVC dual compartment cable trunking with integral divider, Snap-On cover, complete with all accessories, suitable for segregation of power and data cables including fixing on the aluminium partition with accessories accessories complete in all respects. Make: Legrand/Schneider/OBO/AKG/Modi

COPPER PLATE EARTHING:Making Earth pit complete with copper plate 60 cm x 60 cm x 3.15 mm thick electrode and 25 mmx 3 mm copper strip. Copper plate is to be buried directly in ground with top edge of the plate not less than 3.0 metres below normal ground level. Copper strip to be bolted with the earth plate at three points by means of copper bolts, nuts, check nuts and washers. Earth strip to be extended upto earth test point in earth chamber at ground level. Scope of work includes excavation of earth & refilling, drilling hole to electrodes, supply and covering the earth plate with alternate layer of salt and charcoal (not less than 15.0 cm on both side of plate), PCC pit and CI cover, Funnel with watering pipe, wire mesh and copper lugs etc as specified, GI protection pipe of size as specified for protection of earthing lead from top of earth plate upto earth chamber, laying copper strip of length of 5.0 mtrs connecting from test point to mainswitch or switch board or equipment and any other work necessary to complete making earth pit in all respect. Note: Earth resistance to be achived 0.5 ohms by connecting all eartpits as grid as directed by EIC

EARTH STRIP:Supply & laying of 25 mm x 3 mm Copper Strip on porciline insulators clamped to walls at distance of one meter or on cable trays, run in pipes, run underground etc., as required including interconnection between the earth stations etc., complete as required conforming to IS: 3043-1987. Scope of work includes supply of calmping materials necessary to complete work in all respect as per direction of EIC.

SINGLE PHASE INDUSTRAIL SOCKET: Supply fixing, testing and proving of 20A rated industrial socket distribution boards Universal mounting type with 2P+E 3 PIN socket controlled by suitable rating equivalent 2 pole MCB as per site requirement by supplying all necessory fixing accessories. Make:Legrand / Havells / L&T.

20 PAIR TELEPHONE CABLING: Supply and laying of 20 Pair unarmoured 0.50mm dia of each strand, telephone cable to be fixed in suitable rigid PVC conduit of 2mm thickness with all necessary bends, juncion boxes and other accessories as per site requirement. Make: Amp/Finolex /D-link/Mazda/ Polycab.

5 PAIR TELEPHONE CABLING: Supply and laying of 5 Pair unarmoured 0.50mm dia of each strand, telephone cable to be fixed in suitable rigid PVC conduit of 2mm thickness with all necessary bends, juncion boxes and other accessories as per site requirement. Make: Amp/Finolex /D-link/Mazda/ Polycab.

Supply and installation of pushbutton type phones and connecting it to the nearest outlet module of telephone socket including line wire and rochet box.

PROVIDING OF SPEAKERS: Supply, installation, testing & commissioning of (6-8) Watts speakers on existing wall/false ceiling with all interconnections as per site requirements and as directed by EIC. Make: Ahuja /Philips

LAN CABLING:Supply and laying of CAT-6A cable in a suitable rigid/flexible PVC conduit of 2 mm thickness with all necessary bend, junction boxes in concealed/on wall as per the site condition.Make: D-Link / AMP/Molex.

Modular Box for LAN and Telephone point: Supply and fixing of 3 module box of with 2 nos of RJ 45 information Outlet (Jack Type) with shutter and 1 no RJ- 11 telephone jack with 2 mm thick GI modular box independent concealed in wall including chipping of wall and concealing the box with cement patch work and with necessary inter connections complete/surface mounted as per site requirement. Make Legrand / Seimens / Crabtree

LAN and Telephone point: Supply and fixing of 2 module box with 1 no of RJ 45 information Outlet (Jack Type) with shutter and 1 no RJ- 11 telephone jack with 2 mm thick GI modular box independent concealed in wall including chipping of wall and concealing the box with cement patch work and with necessary inter connections complete/surface mounted as per site requirement. Make Legrand / Seimens / Crabtree

Network Switch: Supply, Fixing, Installation, testing and commissioning of 24 port 10/100/1000 mbps layer-2, switch + 4X SFP Ports (Enterprise Model) with exhaust fans in the supplied rack with all accessories as per site condition. The Scope includes the configuration of the switch as per user requirement. The switch shall have IP with MAC binding provision and required protocalls as per cyber security norms MAKE: Extreem

Occupancy sensors: Supply, installation, testing and commissioning of Standalone occupancy sensors suitable for automatic light control. Occupancy Sensor Dual mount PIR occupancy sensor for recessed as well as surface mounted application with 6m dia coverage at a height of 2.5m. Comes with dual rotary knobs to control off delay time and Daylight (ON/OFF). 360° view ,15sec to 30 min delay, capacity 6A,as per direction of EICs

Exhaust Fan with Louver:Supply and fixing of 12 inch exhaust fan with a sweep size 300 mm with double ball bearing and suitable size louvers with all necessary accessories required for complete installation of the item as per site condition on direction of EICs Make: CGL / Usha / Almonard

Water Purifier: RO +UV purification technology with minimum of 8 litre storage capacity. Features: Multi stage filtration, TDS/mineral control, suitable for municipal/borewell water. Make: Kent/AO Smith/ Aquaguard (Eureka Forbes)

Supply of 2 TR Hi-wall mount, Inverter type split air conditioners with 5 star star rating as per following specifications Type: Inverter Model, high wall mount type split Air conditioner Rated Cooling capacity (i.e. at 100% load ) : 6100 Watt or better Star rating as per BEE: 5 Star ISEER : 5.0 or better Refrigerant: Eco friendly refrigerant. Compressor: Scroll/ Reciprocating/ Rotary type compressor. Evaporator & condenser Coil Material : Copper only with corrosion resistant coating. Shall be provided with cordless Remote. Unit shall have display of temperature. Power supply: Single phase, 230±10%, 50Hz ± 3% Make: Bluestar/ Daikin/ Carrier/ Lloyd/ LG/ O-Genaral/ Mitsubishi

Installation & commissioning of 2.0 TR wall mount split AC at proposed Locations including Gas charging ,testing. Scope include : 1. Making hole in the wall suitable for laying copper piping and drain pipe. Wherever possible, carryout core cutting to make hole in the wall. 2. Positioning of indoor unit and ODUs on brackets. 3. Laying copper pipeline, drain lines through the PVC pipe fixed in the wall. 4. Brazing copper lines, flaring, wiring and conducting leak check, vacuumising and refrigerant charging and checking the performance of unit. 5. Proper closing of holes in the wall.

Supply & laying of suitable size suction and liquid copper pipes with proper insulation suitable to 2TR split AC.

Supply and Laying of suitable cable for power / control for 2TR split AC as per OEM recommendation (Make:Polycab/ Havells /Finolex/ Gloster only)

Supply and laying of CPVC drain pipe with suitable bends, couplings for 2TR split AC as per OEM recommendation. Pipe line make: Sudhakar/ Finolex/ Astral/ Ashirwad

Supply and fixing of suitable Ms stands/ brackets for Outdoor units of 2TR Split ACs as per site requirement

No Rupees Only

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings if any. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

HAL/HD/MT/CT/26-27/14

HAL/HD/MT/CT/26-27/14

Electrical Works for Up-gradation of Indigenization Department.

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II