PROVN OF 01 X TOILET BLOCK NEAR BLDG NO T7 PROVN OF 02 X 05 MEN TOILET BLOCKS WITH SOAK PIT NEAR BLDG NO T4 AT A BLOCK GANESHBARI AND PROVN OF TOILET BLOCK NEAR BLDG NO P64 UNDER GE DINJAN

Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm

M&L precast reinforced cement concrete 1:2.4 type B1 (using 20mm graded aggregate) as in cover slab of manholes, septic tank etc, set in cement motar (1:4) complete all as directed by Engr-In-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M/L Plain Cement Concrete Type C2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete sub base complete all as specified and directed ..

M&L for Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m meanradius, built with 1:6 cement mortar complete all as specified and as directed.

M&L for Brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half bri

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Use and waste of form work to flat sides of cocnrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams ; and similar work ; vertical or to batter complete all as specified and directed.

Use and waste form work to flat sides of soffits of floor or roof beams, beam hauching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beam, etc complete all as specified and directed.

S&F Mild steel TMT bars 6 To 8 mm dia., cut to length, bent to shape required, including cranking, stirrups ,bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O. complete all as specified and directed.

S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O. as in steps and binder. complete all as specified and directed.

M&L for RCC (nominal mix ) type B1 1:2:4 (20 mm graded aggregate) in columns, pillars, piers, post and struts etc complete all as specified and directed.

M&L for RCC (nominal mix ) type B1 1:2:4 (using 20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams ; plinth beams; bases for columns, etc ; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (nominal mix ) type B1 1:2:4 (using 20 mm graded stone aggregate) in Beams, cantilevers, bressummer, lintels over 1.5 span complete all as specified and directed.

Rendering 15 mm thick on other than the fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified and directed.

M & L preparation of new decorated surfaces of external walls and applying two coat of cement base paint over a coat of primer complete as specified and directed.

Rendering 10 mm thick on fair faces of brick walls or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) as in sub base of flooring including finished even & rough. complete all as specified and directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed

ck thick wall , built with 1:4 cement mortar complete all as specified and as directed.

Supply and fixing Bldg light bracket fabricated out of GI Tubing light grade 32mm bore Bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron size 40x5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including all the accessories complete with IP 65/66 protection complete as specified/directed

M&L For 10mm thick screed bed or bedding layer of cement mortar (1:3) for vertical surfaces like dado, skirting etc all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidating complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges etc , fixed with self tapping screws as specified and as directed.

S&F for rolled mild steel work as in roof truss (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleat etc. steel section Conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde (E-165) complete all as specified and as directed.

M&L for Cutting existing pipe of any size for inserting of TEE for connection of GI Pipe of 40/50 mm dia complete all as directed.

Supply and spread sand in trenches as sand cushioning to underground cable for protection with fine river sand and provide required cover after punning down complete all as specified and directed. (Note: Thickness of sand cushion after punning down will be measured and paid.)

Supplying and laying un-reinforced precast concrete cable cover, classClass LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

Supply, laying & testing cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor of size 16 sqmm 2 core, 1100 volts grade complete all as directed.

M&L plain cement concrete 1:3:6 tpye C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as directed.

S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps bases, splices, agnle brackets cleats and other connection confirming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

M & L for 40 mm thick damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including nessary formwork complete in all respect as specifified and directed.

M&L 10 mm thick plastering on brick/ stone/ concrete surfaces of ceiling in cement mortar (1:3) finished even and smooth without using extra cement, complete in all respect as specified and directed.

M&L construction of brick masonry valve chamber of size 400mm x 400mm x 400mm (Internal dimension) with PCC 1:3:6 foundation 150mm thick, brick work 23cm thick built in CM 1:6, PCC 1:3:6 coping 50 mm thick, plastering 15mm thick in CM 1:4 to all internal and exposed surfaces including excavation earth work in any type of soil, MS sheet cover 3mm thick fixed with angel iron frame 30x30x4 mm including hinges of size 125mm with locking arrangement embedded in PCC and painting ot MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.

Providing and laying for cement concrete 1:2:4 type- B-1 in coping, hold fasts (using 20 mm nominal size crushed and graded stone aggregate) or of similar type of work including necessary formwork complete in all respect as specified and directed.

Supply only water proofing compound complete in all respect as specifified and directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F Steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovelted are welded, complete all as specified and directed.

S & F Steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars but including channel bar for connecting wire cloth, dovelted are welded, complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete in all respect as specified and directed.

S & F aluminum anodised handle 150 mm long cast type complete all as specified & directed.

All as per item No 92 above but of size 40mm bore

S&F 200mm long Anodised aluminium tower bolt all as specified.

S&F vitreous chinaware sqatting pan of size 580 x 440 mm, 'ORISSA PATTERN' with new PVC 'P' or 'S' trap bedded in cement concrete (excluding flushing cistern and flush pipe) with integral foot rests, complete in all respect as specified and directed.

S & F vitreous china wash down water closet Pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and directed.

All as per item No 94 above but of size 40mm bore

S&F wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed.

S&F of toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in for 15 mm bore pipe brass chromium plated (CP) shower rose 125 mm size, fixed to iron pipe, complete all as specified and directed.

S&F Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges cast copper alloy, chromium plated finish, complete in all respect as specified and directed.

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete in all respect as specified and directed.

S&F PTMT ball valve high pressure 20 mm bore with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, complete in all respect as specified and directed.

S&F 20mm dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary MS pipe clamp, complete in all respect as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp, complete in all respect as specified and directed.

Supply and fixed unplasticised PVC (SWR) Gully trap 125/110 mm, setting and jointing with solvent cement complete in all respect as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring jointslaying in trenches 150 mm bore complete in all respect as specified and directed.

S & F of polythene film black 150micron complete all as specified and directed.

M&L for PCC 1:2:4 type B 1 (using 20mm nominal size crushed and graded stone aggregate) as in surface channels & drains complete in all respect as specified and directed.

S & F aluminium butt hinges 75mm long medium weight etc complete all as specified and directed.

Supply & fix exhaust fans made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and connecting up including making necessary opening on stone brick masonry wall of suitable size finishing it proporly and making good with matching colour with the surroundings provision of cable 3 core of suitable size from ceilingrose to fan complete all as specified and directed.

S& F 6 Module metal Flush Box including white cover plate with frame for fixing of modular switech/scokets etc complete all as specified and directed by Engr-in-Charge.

S& F 4 Module metal Flush Box including white cover plate with frame for fixing of modular switech/scokets etc complete all as specified and directed by Engr-in-Charge.

S & F modular socket outlet 6 Amp 2 module intel multi socket for all pins 230 V AC complete all as specified and directed.

S & F modular switch 6 Amp one way 1 module 230 V AC complete all as specified and directed.

S & F Brass chromium plated shower rose 125mm size swivel type. complete all as specified and directed.

Material and labour for point wiring for One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switchs with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, inultistranded copper conductor drawn through and including PVC conduit of suitable size not less than 20mm (medium grade) concealed including necessary accessories like bends, tees. PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly ncluding sunken type presse

d steel terminal boxes of suitable sizes with plastic laminated white/coloured top bakelite sheet cover 3 mm thick complete all as specified and directed as below Note Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate

Supply and fixing of switch socket combination 3/5 Pin, 2 in 1, 5 Amps, 240 volts flush type (non shuttered) complete all as specified/directed

S&F 35 W LED building security light fitting 1 x 35W new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having TOP OPENING seperate driver cmpartment with IP 65 protection and inpact resistance of IK07 complete all as directed.

Supply and fixing of switch socket outlet combination multipurpose 3/5 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed

S & F MCB single pole and neutral (32 Amp, 240 Volts, 10 KA, 'C' series with all incoming/outgoing connections with proper size lugs, complete all as specfied and directed.

Supply and fixing LED Bldg light fitting 35 Watts 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, including all the accessories complete with IP 65/66 protection complete as specified/directed

All as per item No 131 here-in-before but using 4 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, including alll the accessories required for installation all complete as directed/specified

Supply and lay 3 layer (inner antimicrobial, outer UV stabilized) ISI marked, IS-15801 PP-R pipes SDR 7.4 (PN-16) and PP-R plain and brass threaded fittings laid in concealed work complete of size outer dia 25 mm

M&L for Cutting existing pipe of any size for inserting of TEE for connection of PPR pipe of 32mm dia complete all as directed

M&L form work to edges of concrete flates treads break in floors, window cills concrete railings, openings in concrete walis, floor and roofs n exc 20 cm wide and sisides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but nexc 20 cm

M & L two coats of oil bound distemper over a coat of primer & 1mm thick wall Putty on newly plastered wall surfaces including preparation of surfaces

S&F for steel work in tubular trusses including special shaped washers etc complete using ERW or induction but welded tubes conforming to IS 1161-1979 grade SI-240

S & F aluminium Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestor E-board, HSPC fixed to frame complete ail as specified and directed

S & F vitreous china Semi pedestal pattern (Anglo Indian type) white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 148 type D-2 to match with existing including taking down the existing old one all as specified and as directed

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F for plastic water closet seat cover, black or white closed pattern with flat bottom and cover and mild steel chromium plated hinging device

S&F Anodised aluminium window/ventilator sliding shutters three track way type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glass clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings, such as peg stays 150mm long (1 No) hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) with complete accessories including glass, wire mesh, anodised aluminium frame (chowkhats) and all accessories and fittings etc all as directed by Engineer-in-Charge

S&F for 100mm dia grating doom with waste hole of PTMT (Minimum weight 25 gms)

S&F for Swivel shower rose of PTMT any colour for fixing with 15mm pipe Each (Minimum weight 40 gms)

Supply only 32mm dia waste coupling of PTMT (half or full thread) min wt 40gms

S&F. 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed as specified and as directed

M& L Chequered cement concrete tiles 25cm x 25cm x 20mm thick set. jointed and pointed in neat cementsluny in floors over 20mm thick screed beb in Cm 1:6 complete all as spercitied

Supplying and laying 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified

S&F Vitreous China Urinal, Half stall type, white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1.2. securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Supplying and laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified