GE 861 EWS-51/2023-24

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, poles/stay/cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft soil complete all as specified and directed.

M&L Surface Excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated soil n.exc 50mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed.

M&L Cement concrete 1:2:4type B2 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in foundations, fillings, Mass concrete, footings etc complete all as specified and directed.

M&L for Hard core of broken stone or boulders of guage n. exc 63mm deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for Hardcore of broken stone or boulder of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, complete all as specified and directed.

M&L for walling of random rubble masonry with best quality stone, uncoursed, well bonded, bedded and solidly hearted and built in CM 1:4, all as specified and directed.

RCC(Design mix) M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

RCC(Design mix) M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

RCC(Design mix) M-25 (using 20mm graded stone aggregate) as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Formwork for rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work; vertical or to batter complete all as specified and directed.

Formwork for rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Formwork for rough finished surfaces to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed.

Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

Precast cement concrete hollow block masonry type 1:3:6 using (16mm graded stone aggregate) exc. 10 cm in width and setting in CM 1:6 complete and directed.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for steel work in tubular pole incl special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified as directed.

Supply and fixing in Roof trusses (framed) Fe-410W(Gde E-250) quality-A, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based CORRUGATED steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based PLAIN steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 100mm thick PCC 1:3:6 type C2 (40mm graded stone Aggregate) as in sub floor, sub base, floor and pavings, etc complete all as specified and directed.

M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and smooth without using extra cement as in plinth protection incl joints filling with bituminous sealing compound grade 'A' complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing screed bed or bedding layer of mortar 15 mm thick CM 1:4 laying fioor finishes ccomplete all as specified and directed.

M&L Kota Stone slab 20-25mm thick in riser of steps ,skirtings,dado and pillar laid over cement screed and jointed and screed bed or bedding layer of mortar 15 mm thick CM 1:4 complete all as specified and directed.

M&L 100 mm thick PCC type B-2, 1:2:4 (40 mm graded stone aggregate) finished even and smooth without using extra cement including laying in alternate panels of 1mx1m square making joints with Plastic dividing strips compete all as specified and directed.

M&L Plastic Dividing strips,1.5 mm thick and 95 mm width compete all as specified and directed.

Supply and fixing 2nd Class Hard wood plain, solid, straight chowkhats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

Supply and fixing 30 mm thick 2nd Class hard wood plain, framed, panelled shutter (any number of panel), with pannel of timber flat on both side (Fether edged), or of veneered partical board medium density, wood particle board with commercial face veneeres fitted with chowkhats complete all as specified and directed.

Supply and fixing 30 mm thick 2nd class hard wood glazed and skelton shutters, rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in clause 8.24 of SSR Pt-I has complete all as specified and directed.

Supply and fixing sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square exc .5 Sqm in each pane complete all as specified and directed.

Supply and fixing butt hinges medium weight MS cold rolled 100mm long complete all as specified and directed.

Supply and fixing aluminum handle 100 mm size, cast type, anodized complete all as specified and directed.

Supply and fixing aluminum anodized barrel tower bolt of extruded section of 150mm length complete all as specified and directed.

Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over 3mm thick wall care putty and one coat of primer complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for Preparation of steel and iron surfaces exceeding 10cms in width or girth and applying two coats of synthetic enamel paint over one coat of red oxde zinc chrome primer complete all as specified as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC conduit medium grade of suitable size run on concealed with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr-in-Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

Description All as per srl item No-43 here in above but for one 3 pin 5A socket outlet on independent board controlled by one switch.

Description All as per srl item No-43 here in above but for one 5A socket outlet on the same board controlled by one switch.

Description all as per item No-43 above but for 3 pin socket outlet 15 Amps on independent board with 2.5 Sqmm. PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable.

Supply and fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fixing switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specifeid and directed.

Supply and fixing switch socket combination 2 in 1, 3 pin, 16 Amp flush type universal 240 volt complete all as specifeid and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed.

Supply and fixing decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified & directed.

Supply and fixing LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as specified and directed.

Supply & fixing MCB, SPN (single pole neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified & directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing wall mounted fans complete with accessories, 230 V, 450 mm sweep complete all as specified and directed.

Supply, laying and testing cable XLPE insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core.

Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified. Note : Punned thickness of 18 cm shall be measured and paid.

Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' bricks laid across the cable complete all as specified and directed.

Supply, laying, jointing and testing in trenches, galvanized iron water tubing medium grade (ISI marked) including provision of all necessary steel fittings/ accessories complete all as specified and directed for the sizes 40 mm bore.

M/S BILAL AHMAD BHAT

M/S A.N CONSTRUCTIONs

M/s Ashaq Construction

M/S AKMAL CONSTRUCTIONS

M/S GASSI CONSTRUCTION AND CO

BHAT CONSTRUCTIONS AND BUILFERS

JANDOO AND CO

M/S SHEIKH FEROOZ AHMAD