ARC - Purchase of Furniture

ARC - Purchase of Furniture

3 Seater Waiting Area, Overall Dimensions of Chair, Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as - Width-164.0cm and Depth-70.0 cm. Specification:- The side frame assembly shall be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It shall be made of 0 3.81 ±0.03cm. x 0.2±0.016cm. thick cmx0.l6cm and black powder coated (DFT 40-60 microns). The ends shall be fitted with ABS moulded end caps. It shall be the connecting beam assy. which holds the two side frames to each other. 2 nos tie members shall be used to connect the side frames. The tie-member shall be of dia 3.81 ±0.03cm x 02±0.016cm. thick cm x 0.16cm and black powder coated (DFT 40-60 microns ). The seat/back assemblies shall be mounted on one of the tie-member which shall has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5±0.1cm. thk 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. The seat rest assembly shall be consists of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +/-2 Kg/cm3 with Hardness load=25±2kgf as per lS:7888 for 25% compression of the foam. The complete moulded seat rest assembly shall be covered with a replaceable fabric upholstery cover. The dimensions of seat shall be: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T). The backrest assembly shall be flexing type and consists of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +/- 2 Kg/cm3 with Hardness load 14± 2 kgf as per lS:7888 for 25% compression of the foam. The complete moulded backrest assembly shall be covered with a replaceable fabric upholstery cover. The size of the back shall be 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) The adj. glide shall be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take care or unleveled floor surface. Overall Dimensions of Chair shall be Seat Height - 43.5 cm, Height - 78.5cm, Width & Depth of Chair as measured from pedestal - Width-164.0cm and Depth-70.0 cm. The manufacturer should compilant and shall have membership /certification from ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA, GRIHA, AIOTA, INDOOR AIR QUALITY Certifications.

3 Seater Waiting Area, Overall Dimensions of Chair, Seat Height - 40.0 cm. Height - 67.5cm. Width & Depth of Chair as - Width-163.0cm and Depth-57.0 cm. Specification: It should be made up of black powder coated rectangular M.S.ERW tube having 8.0 ± 0.03 cm x 4.0 ± 0.03 cm x 0.2 ± 0.014 cm size. It should be chrome plated made of cold rolled steel with 0.12 ± 0.013 cm thinkness. It should be powder-coated perforated shell made from cold rolled M.S. sheet (DIN1623 Partl ST-12 Grade) 0.14 ± 0.013 cm thickness.The Side Bar should be made of Chrome plated solid steel 3.0 ± 0.03 cm x 1.2 ± 0.3 cm with fluting and plastic inserts. The Shell should be assembled on the Cross Beam with help of M8 Bolts (Per Seat - 8 nos. Seat to Bracket and 4nos. Bracket to Cross Beam).

3 Seater Waiting Area Overall Dimensions of Chair Seat Height - 44.1 cm. Height - 78.5cm. Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm. Specification: The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame.

3 Seater Waiting Area, Overall Dimensions of Chair, Seat Height - 44.1 cm. Height - 78.5cm. Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm. Specification: SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts.* SEAT SIZE : 50.0 cm (W) x 45.5 cm (D)* BACK SIZE : 50.0 cm (W) x 56.0 cm (H) 2. CROSS BEAM: It is made up of cold rolled steel with 0.2 ± 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end caps. 3. LEG: It is made up of cold rolled steel with 0.12 ± 0.013 cm thickness. It is powdercoated. The legs are fitted with leveller cups covered with SS304 sheet.4. ARMREST: It is made of SS304 round tube of Ø 3.175 ± 0.03cm x 0.12 ± 0.013 cm thickformed to make an oblong shape. Nylon and should be fitted onto the armrest frame.

Acrylic Cushion Chair Acrylic visitor Chair with Cushion (Standar packing of chair 12 Nos Order should be multiple 12 Nos)

Almerah / Capboard Storewel Plain having 4 adjustable Shelves., Size: 1981 H x 916 W x 486 D Specification:- overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should compilant and shall have membership /certification from ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA, GRIHA, AIOTA, INDOOR AIR QUALITY Certifications.

Office Table, Size:- 1650 Width x 900 Depth x 728 Height mm Specification:- Table with CPU Hanger size shall be 1650 Width x 900 Depth x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . The manufacturer should compilant and shall have membership /certification from ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA, GRIHA, AIOTA, INDOOR AIR QUALITY Certifications.

Exeutive Office L Shape Table (without Pedstal / Drawer) Size:- 1800 W x 900 D x 750 H ERU - 1550 x 450 x 705 Specifiction:- Table size shall be 1800 Width mm x 900 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU - RHS size shall be 1550 Width x 450 Depth x 705 Height.The top of ERU -5216 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL). Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Free Standing Ped With Castors be 390 mm (W) x 440 mm (D) x 646 mm (H). The construction & Material used shall be welded assembled , 0.8 mm thick CRCA for body shell , drawer front & tray , front side stiffener ,rear aide stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stoffener . The drawer fronts shall be metal front straight edge . Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box-box-file Pedestal. The top panel shall be metal straight edge top. Castor should be swiveling non - lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal . The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out . Partition in drawer shall be 1 no. Partition in box drawers with lock mounted . Plastic pencil tray shall be optional accessory . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Application shall be suitable for pushing below work surface which has got a clear height of 725 mm from below . For drawer pulling side wise tapered recess provided in shell behind drawer fronts. The manufacturer should compilant and shall have membership / certification from ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA, GRIHA, AIOTA, INDOOR AIR QUALITY Certifications.

Executive Office Table Size:- 1800 x 900 x 750 Specification:- Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The manufacturer should compilant and shall have membership /certification from ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA, GRIHA, AIOTA, INDOOR AIR QUALITY Certifications.