Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.1 LAdmitted-Finance | ₹55.1 L | L1 | Admitted-Finance |
| 2 | L2₹66.9 L+₹11.8 L (21.4%)Admitted-Finance | ₹66.9 L+₹11.8 L (21.4%) | L2 | Admitted-Finance |
| 3 | L3₹71.7 L+₹16.6 L (30.0%)Admitted-Finance F 203 MANGAL BAZAAR LAXMI NAGAR DELHI 110092 | SHAHDARA | DELHI | 110092 | ₹71.7 L+₹16.6 L (30.0%) | L3 | Admitted-Finance |
| 4 | L4₹75.9 L+₹20.7 L (37.6%)Admitted-Finance N I T NO M 111 WZ 2025 26 TC 71 MUNICIPAL CORPORATION OF DELHI OFFICE OF THE EXECUTIVE ENGINEER M 111 WEST ZONE C BLOCK VISHAL ENCLAVE NEW DELHI 27 | CENTRAL DELHI | DELHI | 110002 | ₹75.9 L+₹20.7 L (37.6%) | L4 | Admitted-Finance |
| 5 | L5₹85.2 L+₹30.1 L (54.5%)Admitted-Finance | ₹85.2 L+₹30.1 L (54.5%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Aakar Engineers and Contractors L8 | Thokchom Okendro Singh L6 | Proficio Engineering And Construction Pvt. Ltd. L3 | Arvind Techno Contracts L5 | SAMEER GLAZING SYSTEM PRIVATE LIMITED L2 | Fermium Constructions LLP L1 | M/S ZELIZHU AND SONS L7 | SINGHAL ENTERPRISES L4 | MD LIYAKAT ALI L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | 848.64 | sqm | 4,880 ₹41,41,363.2 | 6,028.87 ₹51,16,340.24 | 4,300 ₹36,49,152 | 4,678.6 ₹39,70,447.1 | 4,190 ₹35,55,801.6 | 2,900 ₹24,61,056 Lowest | 5,385 ₹45,69,926.4 | 3,700 ₹31,39,968 | 6,378.5 ₹54,13,050.24 |
| 2.00 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | 4,780.64 | kg | 144 ₹6,88,412.16 | 179.55 ₹8,58,363.91 | 130 ₹6,21,483.2 | 140 ₹6,69,289.6 | 145 ₹6,93,192.8 | 105 ₹5,01,967.2 Lowest | 195 ₹9,32,224.8 | 125 ₹5,97,580 | 212.73 ₹10,16,985.55 |
| 3.00 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. | 1,180.07 | sqm | 3,232 ₹38,13,986.24 | 2,185.53 ₹25,79,078.39 | 1,800 ₹21,24,126 | 2,278.6 ₹26,88,907.5 | 1,435 ₹16,93,400.45 Lowest | 1,500 ₹17,70,105 | 2,265 ₹26,72,858.55 | 2,600 ₹30,68,182 | 2,440.74 ₹28,80,244.05 |
| 4.00 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | 2,028.71 | sqm | 80 ₹1,62,296.8 | 49.48 ₹1,00,380.57 Lowest | 50 ₹1,01,435.5 | 200 ₹4,05,742 | 100 ₹2,02,871 | 150 ₹3,04,306.5 | 75 ₹1,52,153.25 | 80 ₹1,62,296.8 | 62.37 ₹1,26,530.64 |
| 5.00 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 1,650.12 | kg | 606 ₹9,99,972.72 | 530.63 ₹8,75,603.18 | 420 ₹6,93,050.4 | 500 ₹8,25,060 | 455 ₹7,50,804.6 | 350 ₹5,77,542 Lowest | 795 ₹13,11,845.4 | 400 ₹6,60,048 | 629.57 ₹10,38,866.05 |
| 6.00 | Credit items Taking out dismantle/obsolete false ceiling i/c board,frame section etc. outside Airport premise as per direction by E-I-C. | 2,028.71 | sqm | 50 ₹-1,01,435.5 | -10 ₹20,287.1 Lowest | 10 ₹-20,287.1 | 20 ₹-40,574.2 | 100 ₹-2,02,871 | 50 ₹-1,01,435.5 | 2 ₹-4,057.42 | 20 ₹-40,574.2 | 15.5 ₹-31,445.01 |
Tender Value
₹1.1 Cr
Closing Date
10 Apr 2021, 6:00 pmClosed
Senior Manager
ATC Building, Imphal International Airport
Replacement of False ceiling in Terminal Building at Imphal Airport
2021_AAI_74536_1
AAI/IMP/DGM(E-C)/Ceiling/20-21
Open Tender
Civil Works
Item Rate
150 days
Imphal Airport
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,120
Exempted
14 Jun 2021
26 Mar 2021
12 Apr 2021
27 Mar 2021
10 Apr 2021
27 Mar 2021
27 Mar 2021 - 5 Apr 2021
Amount
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Credit items Taking out dismantle/obsolete false ceiling i/c board,frame section etc. outside Airport premise as per direction by E-I-C.
SAMEER GLAZING SYSTEM PRIVATE LIMITED
Proficio Engineering And Construction Pvt. Ltd.
SINGHAL ENTERPRISES
Arvind Techno Contracts
Thokchom Okendro Singh
M/S ZELIZHU AND SONS
Aakar Engineers and Contractors
MD LIYAKAT ALI
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
NIT.pdf
Tender Documents • 6.23 MB
BOQ_80538.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .