Karnataka

AOC

Works

Lift Irrigation Scheme

EMERGENCY REPAIRS OF TK HALLI LIS AND MADAHALLI LIS OF MINOR IRRIGATION DEPARTMENT IN MALAVALLI TALUK MANDYA DISTRICT AND EMERGENCY REPAIRS OF SURGHITOPPU LIS AND NANJAPURA LIS OF MINOR IRRIGATION DEPARTMENT IN MALAVALLI TALUK MANDYA DISTRICT

Minor Irrigation Department

Minor Irrigation Division Mandya | Mandya, Karnataka

Amount: ₹25.8 LCloses: 17 Feb 2026Closed

Bids

1 Bid10 Feb 2026

#	Company	Amount	Status
1	₹26.7 LAWARDED	₹26.7 L	AWARDED

Tender Value

₹25.8 L

EMD Value

₹52,000

Closing Date

17 Feb 2026, 10:31 pmClosed

Tender Inviting Organisation

Name

Minor Irrigation Department

Work Description

MAINTENANCE OF LIS

Tender Information

Tender ID

265174

Reference Number

MI/2025-26/LI/WORK_INDENT10906

Tender Type

Open

Product Category

Lift Irrigation Scheme

Location

Minor Irrigation Division Mandya

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredRegistration Certificate

RequiredCEIG Registered Electrical License

RequiredGST Registration Certificate

RequiredAddress/Phone Number for Communication

RequiredSimilar Nature of Work Done

RequiredBid Capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP PORTAL due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending Bidder/ Firm/ company are advised to visit the work site before submission of the tenders

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced prior to the opening of bid for verification. Scanned signature of the Bidder/ Firm/ company authorized representative of the Bidder/ Firm/ company shall be attached while uploading bid document

If any of the dates mentioned above happens to be a general holiday, the next working day holds good

conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever

Corrigendum will be published in the website for all modifications or corrections if any

The contractor should mention their recent correct postal address & mail address in declaration forms

All materials like steel, cement etc., required for the above work should be procured by the contractor only. No departmental supply of any materials shall be made by Dept

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also Land acquisition problems if any

Royalty charges will be deducted from contractors running bill as the per prevailing G.O.at the time of payment. Commerce and Industries Secretariat Notification No.CI 81 MMN 2014 18th February 2018 see sub rule i of rule 36 Royalty, and Mines and Geology, rules and regulations amendment Act, para 36 &para 92 of 1994 and as per the and Circular issued from Director Mines and Geology Department, Bengaluru letter no 2024 25 20 69 Dated 28 01 2025 are to be followed

Typographical errors, if any, will not be the ground for any claims by the Contractor

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced for verification otherwise the tender will be treated as non responsive bid and rejected

Scanned signature of the Bidder/ Firm/ company authorized representative of the Bidder/ Firm/ company shall be attached while uploading bid document

Incomplete tender documents will be rejected

As per the Karnataka Building and other Constructions Workers Welfare Cess Act 1996, 1% of the bill amount will be deducted from the bills

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work.

The contractor should furnish the name of the individual / Firm / company with address & telephone No with place of registration, year of incorporation etc

Original documents should be produced for verification at any stage of the tender process, as and when sought for. Failure to produce original documents will lead to disqualification. work done certificate should have all the details CR no, work order issuing date, work completion date and year as asked in bid document

If MDP(Mineral dispatch permits) not submitted by contractors for usage of respective minerals for construction the Royalty charges will be deducted from the contactors running bill as per the direction given by concern department or government at the time of payment

The Applicant shall be registered in KPWD/CPWD and Other Public sector Organizations and shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by GOK/GOI

Restrictions on Public Procurement from Bidders of certain countries as per Government order No. FD 455 Exp-12 2020 Bengaluru dated:01-04-2023

During the execution of works, if any minor minerals are required, contractors have to abide by the prevailing rules and Acts applicable to Minor Minerals. As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If mineral Dispatch permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time) will be deducted from the contractors bill

The agencies participating in the tender shall be registered in the Construction Labour Board as per the G.O. No. LD 300 LET 2006 Dated:18-1-2007 and Addendum No. LD 95 LET 2013 Bengaluru Dt:1-4-2013. Also the contractors entrusted with the work shall employ the labours only who have registered in the Karnataka Building and Construction Workers Welfare Board failing which the contractor shall be liable for any further action as deemed by the authority

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms as mentioned in bid document for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract for all works

The contractor has to make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to therelevant IS Specifications and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The Work Done Certificates shall be issued by the Executive Engineer with indent number mentioned (if work done in Karnataka State), otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states)

Sub-Leasing/G.P.A of Work is Prohibited

Each Item Of BOQ To be read as with all lead and lifts including loading and unloading charges and as per the direction of Engineer in charge

Uploaded drawings are for TENDER PURPOSE ONLY

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Income Tax : Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos. to be uploaded

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of KPP PORTAL on or before the last date and time of bid submission.

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled

For payments related to GST,contractor should abide to prevailing FD Order no 417 EXP-12/2024 bengaluru dated 09-08-2024

The Bidder shall quote Rates WITHOUT adding GST for either materials or works Contract (Service)GST payable by the contractor under this work/contract will be paid to the contractor.

Item Rates are Exclusive of GST and amount to tender is also Exclusive of GST hence the contractor should quote his/her rate Exclusive of GST.

All other terms and conditions as per KW-2 tender documents ARE APPLICABLE

Bidder shal pay contract management Module Processing fees of 0.025% of the contract value (Minimum Rs 500 and Maximum of Rs 7500) soon after contract has been issued to bidder

Technical Criteria

Past Experience

The intending bidder Satisfactory completion as a prime contractor for at least one similar work such as Maintenance of LIS works of value not less than Rs 12.89 lakhs (Value 50% of the Estimated Cost put to tender) during the last five financial years from 2020-21 to 2024-25. An additional weightage of 10% for each year will be added to the cost of work done to bring it to the 2025-26 price level. Certificates should be obtained from the officer not below the rank of Executive Engineer or equivalent/above the rank of government department

Work Done Certificate

Capabilities of Vendor

The intending bidder should have achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 25.78 Lakhs(usually not less than the estimated cost under this contract for works costing up to 100 Lakhs) in the last five years period i.e. 2020-21 to 2024-25. Additional weight age at 10% for each year will be added to the financial turnover to bring it to the 2025-26 price level. Annual Turnover Certificate along with Balance sheet certified/attested by Chartered Accountants should be uploaded with 18-Digits system generated unique number UDIN Number

Audited CA Certificate of Annual Turnover

Financial Status

Valid Turnover Certificate

Audited CA Certificate of Annual Turnover

Others

Tenderer or his identified Sub Contractor should possess valid CEIG Registered Electrical License (In case of Civil Contractor, Contractor Should enter Agreement /MOU with identified Sub Contractor)

Others -- Registration Certificate/Agreement/MOU

GST Registration Certificate.

GST Registration

Maximum value of civil engineering works executed in any one year during the last five years updated to 2025-26 price level i.e.,( 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25) taking into account the completed as well as works in progress

Others -- Bid Capacity

List of existing commitments and ongoing works

Others -- Qualification Information

List of works for which tenders already submitted

Others -- Qualification Information

Name/Address/Phone Number for Communication for Proper Communication.

Others -- Name/Address/Phone Number for Communication for Proper Communication.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka

Others -- Self Declaration

valid Registration Certificate (License

PWD Registration Certificate (Class I/II/III/IV)

Work Locations

Fee & Financial Details

Tender Fee Amount

₹650

EMD Fee Amount

₹52,000

Important Dates

Last Activity

10 Feb 2026

Published

10 Feb 2026

Bid Opening

18 Feb 2026

Download Ends

13 Feb 2026

BOQ Preview

•

EMERGENCY REPAIRS OF TK HALLI LIS AND MADAHALLI LIS OF MINOR IRRIGATION DEPARTMENT IN MALAVALLI TALUK MANDYA DISTRICT

•

Item Code-01 Clearing and Grubbing Road Land.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ear... 19.20 100 Sqm

•

Item Code-02 De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle ( excluding cost of transportation ) includin... 144.00 Cum

•

Item Code-03 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m... 2.00 Job

•

Item Code-04 Supplying Ball bearing as per ISI specifiction with guarantee period of not less than 12 months Bearing cost for 50 HP.complete with all lead and lift including Machineries loading and unloading charg... 4.00 Each

•

Item Code-05 Supplying thrust bearing as per ISI specifiction with guarantee period of not less than 12 months - Bearing cost for 50 HP.complete with all lead and lift including Machineries loading and unloading c... 4.00 Each

•

Item Code-06 Providing, fabricating and fixing at site various diameter MS SPECIALS of mechanised ends as per sketch to suite for PSC pipes roll on joint and confined O ring system. The cost is inclusive of all ma... 16.00 Each

•

Item Code-07 11 kV, 800 A Male Contact Blade suitable for Double Break GOS.complete with all lead and lift including Machineries loading and unloading charges and as per the Direction Of Engineer In Charge Of The ... 2.00 No

•

Item Code-08 11 kV, 800 A Female Contact Blade suitable for Double Break GOS.complete with all lead and lift including Machineries loading and unloading charges and as per the Direction Of Engineer In Charge Of Th... 2.00 No

•

Item Code-09 Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V- T Pump for Phosphorous bronze bearing bush for 50 HP to 60 HP.complete with all lead and l... 2.00 Each

•

Item Code-10 Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP STAGE BUSHES for Phosphorous bronze bearing bush for 50 HP to 60 HP.complete with al... 2.00 Each

•

Item Code-11 Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP IMPELLER AND NECK RING for 50 HP to 60 HP.complete with all lead and lift including ... 2.00 Each

•

Item Code-12 Supplying and fixing kinetic AIR VALVE PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of gr... 2.00 Each

•

Item Code-13 Labour Charges only for fixing double / isolated AIR VALVES (CI tamper proof of PN 16.0)conforming to ISS 14845 - 2000 and as detailed below with required stub and flange, conveying to work site, load... 2.00 Each

•

Item Code-14 Work of replacement of faulty control components and modification and rewiring of soft starter panel upto 1250KW/6.6KV motor as specified below: a. Disconnecting the power cables and control cables. b... 2.00 Job

•

Item Code-15 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 210.87 Cum

•

Item Code-16 Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of a... 35.15 Cum

•

Item Code-17 Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates a... 67.10 Cum

•

Item Code-18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 2.42 t

•

EMERGENCY REPAIRS OF SURGHITOPPU LIS AND NANJAPURA LIS OF MINOR IRRIGATION DEPARTMENT IN MALAVALLI TALUK MANDYA DISTRICT

•

Item Code-01 Clearing and Grubbing Road Land.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ear... 72.00 100 Sqm

•

Item Code-04 Supplying Ball bearing as per ISI specifiction with guarantee period of not less than 12 months Bearing cost for 100 HP.complete with all lead and lift including Machineries loading and unloading char... 3.00 Each

•

Item Code-05 Supplying thrust bearing as per ISI specifiction with guarantee period of not less than 12 months - Bearing cost for 100 HP.complete with all lead and lift including Machineries loading and unloading ... 3.00 Each

•

Item Code-06 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O... 2.00 Each

•

Item Code-07 Providing, fabricating and fixing at site various diameter MS SPECIALS of mechanised ends as per sketch to suite for PSC pipes roll on joint and confined O ring system. The cost is inclusive of all ma... 20.00 Each

•

Item Code-08 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa... 2.00 No

•

Item Code-09 11 kV, 800 A Male Contact Blade suitable for Double Break GOS.complete with all lead and lift including Machineries loading and unloading charges and as per the Direction Of Engineer In Charge Of The ... 3.00 No

•

Item Code-10 11 kV, 800 A Female Contact Blade suitable for Double Break GOS.complete with all lead and lift including Machineries loading and unloading charges and as per the Direction Of Engineer In Charge Of Th... 3.00 No

•

Item Code-11 Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V- T Pump for 80 HP to 100 HP.complete with all lead and lift including Machineries loading a... 6.00 Each

•

Item Code-12 Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP STAGE BUSHES for 80 HP to 100 HP.complete with all lead and lift including Machineri... 6.00 Each

•

Item Code-13 Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP IMPELLER AND NECK RING for 80 HP to 100 HP.complete with all lead and lift including... 6.00 Each

•

Item Code-14 ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months -For Pump dismentaling and refitting after attending repairs - 200 HP to 250 HP.complet... 6.00 Each

•

Item Code-15 Supplying and fixing kinetic AIR VALVE PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of gr... 4.00 Each

•

Item Code-16 Labour Charges only for fixing double / isolated AIR VALVES (CI tamper proof of PN 16.0)conforming to ISS 14845 - 2000 and as detailed below with required stub and flange, conveying to work site, load... 4.00 Each

•

Item Code-17 Work of replacement of faulty control components and modification and rewiring of soft starter panel upto 1250KW/6.6KV motor as specified below: a. Disconnecting the power cables and control cables. b... 1.00 Each

•

Item Code-18 Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m... 2.00 Each

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 2-General -PACK-2.doc

Tender Document • 1.32 MB

Ready to Participate?

Download all tender documents and submit your bid