Fixing of balcony windows in two D type flats and conversion of IWC to EWC in the toilet of two D type flat at HRI, Prayagraj

Amount

Providing and fixing powder coated aluminium (minimum thickness of power coating 50 micron) work for doors, windows, ventilators and partitions with extruded built-up standard sections and other sections of approved IS: 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing will be paid separately under relevant item)

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete with 12 mm mild steel U beading

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5.0 mm thickness

Providing & Fixing in position following type of Alumining Fitting with nesessary screw,washar etc.

Butt Hinge Size 75x63x4 mm

Handle 125 mm

Pull bolt lock, ISI marked, anodised

Tower bolts, ISI marked,100x10 mm

Providing and fixing in position 4 mm tk. APP sheet above window for sunshed as per requirement and direction of Engineer- in - Charge

Providing and fixing in position Aluminium window frame and shutter with glass, wire mesh and 4 mm APP Sheet all complet (excluding the cost of Aluminium ,Glass , Wiremesh and 4 mm APP sheet)as per requirement and direction of Engineer- in - Charge

Filling gap between Aluminium section and plaster surface of wall with cement base wall putty

Supply & fixing of white vitreous china European type water closet pan (make Cera, Parryware) with white sheet cover including dismantling and cleaning of area of old Indian type water closet, rising the connecting pipe, filling down portion with cement concrete 1:2:4, converting kota stone floor with ceramic tiles (make Kajaria / Somany), providing and fixing of Nahani trap including required 3" PVC pipe for drainage and supply & fixture of two way tap (make Jaguar or equivalent) including health faucet (make Cera or equivalent). Size of floor area around 4.0 Sq.mtr.

Supply & fixing of white vitreous china European type water closet pan (make Cera, Parryware) with white sheet cover including dismantling and cleaning of area of old Indian type water closet, rising the connecting pipe, filling down portion with cement concrete 1:2:4, converting kota stone floor with ceramic tiles (make Kajaria / Somany), providing and fixing of Nahani trap including required 3" PVC pipe for drainage and supply & fixture of two way tap (make Jaguar or equivalent) including health faucet (make Cera or equivalent). Size of floor area around 1.5 Sq.mtr.

M/S SHARDA CONSTRUCTION (BID ID -3221549)