Karnataka

AOC

Works

Roads

IMPROVEMENTS TO ROAD FROM SH-86 TO JOIN ANTHRASANTHE ROAD (SH-33) VIA NAGANAHALLI, TARAKA DAM FROM CH.15.70 to 16.99 km & IMPROVEMENTS TO ROAD FROM H.D.KOTE-MURKAL ROAD AGASANAHUNDI CIRCLE TO GOWDI MACHANAYAKANAHALLI ROAD (SELECTED REACHES) IN H.D KOTE TALUK, MYSORE DISTRICT.

Public Works Department

PWD Special Division Office Hunasuru | Karnataka

Amount: ₹1.6 CrCloses: 20 Jan 2026Closed

Bids

1 Bid5 Jan 2026

#	Company	Amount	Status
1	₹1.7 Craccepted-aoc	₹1.7 Cr	accepted-aoc

Tender Value

₹1.6 Cr

EMD Value

₹2.4 L

Closing Date

20 Jan 2026, 9:30 pmClosed

Tender Inviting Organisation

Name

Public Works Department

Work Description

IMPROVEMENTS TO ROAD FROM SH-86 TO JOIN ANTHRASANTHE ROAD (SH-33) VIA NAGANAHALLI, TARAKA DAM FROM CH.15.70 to 16.99 km & IMPROVEMENTS TO ROAD FROM H.D.KOTE-MURKAL ROAD AGASANAHUNDI CIRCLE TO GOWDI MACHANAYAKANAHALLI ROAD (SELECTED REACHES) IN H.D KOTE TALUK, MYSORE DISTRICT.

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT31524

Reference Number

PWD/2025-26/RD/WORK_INDENT31524

Tender Type

Open

Product Category

Roads

Location

PWD Special Division Office Hunasuru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificatefrom CA with UDIN last 5 years Turnover

RequiredContractor Registration Certificate Valid Class III and above license

RequiredContractor contact details and address and mobile number

RequiredGST Certificate, Pan Card & Tin Certificate

RequiredExisting Commitments work details B-Value should be furnished duly attested by the concerned Executive Engineer as per Standard Tender Documents

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant documents.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of e Procurement portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder and as per prevailing Govt orders

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The cost of the Tender processing fee shall not be refundable.

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

Contractors Should be registered with KPWD as Class-III and above.(valid license)

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 and further orders thereon.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work

Contractor should take all precautions to ensure that no damage is caused to any adjacent structures/utilities above or below the ground and also to the existing canal CD works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost. Damage to physical property and personal injury and death will be the personal risk of the contractor.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost

Contractor should execute the project with least impact to the environment till the completion of project.

All materials required for the work like bitumen, steel, cement etc., shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

All the items in the tender including all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convence of all matiral and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer-in-charge of this work.

When embankments are constructed disputes arising on account of damages to the existing field channels, bunds and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should follow strictly the privaling rules of labour act & The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009

As per the Government Circular No.PWD:ITC:2008/2099, Dated.2-12-2010, the tendered contractors, should submit the Original Bank Guarantee issued by the Bankers for the said work at the time of opening of the Technical Bids. The Contractors failing to submit the Original Bank Guarantees will be disqualified and the initial amount deposited through E-payment will be forfeited and also such contractors will be Black listed and Debarred from participating in future tenders.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders. As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

Minimum One Lakh Rupees of the specified EMD should be paid in any one of the forms mentioned in Clause 13.1, Bank Guarantee must be given for the remaining amount in prescribed format. The copy of the Bank Guarantee must be scanned and submitted along with the Technical bid. The original should be produced during opening of Technical bid

The successful tenderer should provide monthly physical and financial progress to be achieved in Bar chart/Milestone chart/PERT chart during agreement.

The returns submitted to the I.T. along with the Profit and Loss account statement,Balance sheet should be uploaded for the financial turnover criteria attested by registered Chartered Accountant.

GST is not included in the rates.

Regarding Appealing aggrieved contractors may appeal to the prescribed (Appellant) authority within 15 days as per KTTP and appeal should be through KPPP only as per Govt.order No:pwd/572/CRM-2020(E) Bangalore DT.09-10-2020. The same will not be considered if appeal through Letters.

Eighteen Percent GST shall be paid to the tendered amount separately.

The defect liability period for this project shall be 1 Year

The successful contractor should setup material testing laboratory at the work site before commencement of work

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extentshould submit HSE document defining all the procedure including the policies before execution of the project

The safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

The success-full contractor should complete the whole work with in 4 months from the date of handing over of site (including rainy season)

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

ITT 3.2 - To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2020-21 to 2024-25) (b) Satisfactorily (at least 90%) completed as prime contractor, at least one similar work such as Road construction (with asphalting) work of value not less than Rs. 80.42 Lakhs. (Work-done certificate from not below the rank of an Executive Engineer or equivalent. (Section 3)

Work Done Certificate

ITT 3.2 - To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2020-21 to 2024-25) (c) Executed in any one year, the following minimum quantities of work. 1. Embankment/Subgrade : 959 Cum 2. GSB : 901 Cum 3. WMM : 1733 Cum 4.DBM/SDBC/BC/CC/MSS : 502 Cum 5. PCC/RCC : 80 Cum 6. Steel : 2.57 MT

Work Done Certificate

Capabilities of Vendor

3.5 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under, Assessed available tender capacity (AxNx1.5 - B) where. A is Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 4 months (period of completion of the works for which Tenders are invited)

Audited CA Certificate of Annual Turnover

Financial Status

ITT 3.2(a) - To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2020-21 to 2024-25) on at least two financial years annual turnover of Rs. 321.68 lakh (in all classes of civil engineering construction works only) Profit and loss statement and Turnover certificate from Govt Reg Chartered Accountant with UDIN

Audited CA Certificate of Annual TurnoverOthers -- Profit and loss statement (2020-21 to 2024-25)

ITT 3.3 - Each Tenderer should further demonstrate : (b) Liquid assets and /or availability of credit facilities of no less than Rs. 120.63 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (Bankers certificate issued by an nationalized /scheduled bank as prescribed in the kw4)

Line of Credit

Others

Contractor Registration Certificate Class III and above and above license

PWD Registration Certificate (Class I/II/III/IV)

Work Locations

Fee & Financial Details

Tender Fee Amount

₹4,030

EMD Fee Amount

₹2.4 L

Important Dates

Last Activity

5 Jan 2026

Published

5 Jan 2026

Bid Opening

21 Jan 2026

Download Ends

16 Jan 2026

Pre-Bid Meeting

16 Jan 2026

BOQ Preview

•

IMPROVEMENTS TO ROAD

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Surface Drains in Soil - Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated mate...

•

Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator. Ref to MoRT&H : IRC - 305.4.3 ---- including the cost and conveyance of all materials,...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

ROAD FURNITURES

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer ston...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). ...

•

CONSTRUCTION OF CC DRAIN

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

CONSTRUCTION OF 750mm DIA FIELD CULVERT

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

WATER SUPPLY PIPE LINE SHIFTING

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

SHIFTING OF HT/LT LINES

•

RCC Pole - 9 Mtr Long, 145 Kg WL (V-6 ESCOM P.No 3/ 1/1.01) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, lo...

•

Labour For RCC Pole(V-6 ESCOM P.No 44/ 30/2.02) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading and unl...

•

PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards (V-6 ESCOM P.No 3/ 6/1.06) ---- including the cost and conveyance of all materials, cost of labour h...

•

Labour (V-6 ESCOM P.No 44/ 30/2.02) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading and unloading charg...

•

Spiral Earth Electrode (V-6 ESCOM P.No 26/2.16) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading and unlo...

•

Labour for Spiral Earth (V-6 ESCOM P.No 44/36/2.08) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading and ...

•

11 kV, Horizontal Cross Arm (V-6 ESCOM P.No 3/12.2.02) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading...

•

Labour for Horizontal Cross Arm (V-6 ESCOM P.No 45/52/5.04) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loa...

•

11 kV, 45 kN Polymeric Insulator (V-6 ESCOM P.No 5/ 56/6.10) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loa...

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) (V-6 ESCOM P.No 5/52.6.06) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, eq...

•

LT 4 Pin Cross Arm GI (V-6 ESCOM P.No 4 I.No 16/2.06) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading an...

•

Labour for 4 Pin Cross Arm (V-6 ESCOM P.No 45 I.No 50/5.02) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, lo...

•

1.1 kV Polymeric Pin Insulator (V-6 ESCOM P.No 5/51/6.05) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loadin...

•

No. 8 Strain Insulator (V-6 ESCOM P.No 5/53/6.07) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading and u...

•

Guy Set Complete with No. 15 Strain Insulator ((CDS-1) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading a...

•

Labour for Guy Set (CDS-1) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading and unloading charges and all...

•

HT ST Support 50x8 mm Flat - GI (V-6 ESCOM P.No 4/22/2.12) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, load...

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries...

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries, equipments and all lead, lift, loading and unlo...

•

Releasing & Refixing of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth (V-6 ESCOM P.No 44/ 30/2.02)(1113x1.9) ---- including the cost and conveyance of all materials, cost of labour hir...

•

Releasing & Refixing of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support (V-6 ESCOM P.No 45/52/5.04) (160x0.9) ---- including the cost and c...

•

Releasing & Refixing of 4 Pin cross arm with Insulator and Braces fixing (V-6 ESCOM P.No 45/50/5.02) (160x0.9) ---- including the cost and conveyance of all materials, cost of labour hire charges of...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Rabbit (Escom Pg 46, I.No 67/7.02)(5233x1.9) ---- including the cost and conveyance of all materia...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Weasel (Escom Pg 46, I.No 66/7.01)(3975x1.9) ---- including the cost and conveyance of all mater...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Surface Drains in Soil - Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated mate...

•

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator. Ref to MoRT&H : IRC - 305.4.3 ---- including the cost and conveyance of all materials,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer ston...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02) ---- including the cost and conveyance of all materials, cost of labour hire charges of all machineries...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Weasel (Escom Pg 46, I.No 66/7.01)(3975x1.9) ---- including the cost and conveyance of all mater...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw4 indent 31524.doc

Tender Document • 0.27 MB

Ready to Participate?

Download all tender documents and submit your bid