864/WS/43/2021-22

Amount

Dismantling plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof coverings complete, all as specified and as directed

S&F Galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coatch screws and washers in roofs, 0.63 mm thick m Gde-o quality, with 275 grms/sqm zinc coating and Gde 'B' (i.e 12.5 mm ) corrugation, complete, all as specified and as directed

S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 275 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers complete all as specified and as directed

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position as in unframed/framed work complete, all as specified and as directed

M&L 2nd class soft wood (kail) as in scantling clean sawn, complete, all as specified and as directed.

Dismantling of wall and ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and as directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling

S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc complete, all as specified and as directed.

S&F 2nd class hard wood plain clean sawn fillets square, rectangular or triangular in section exc 6 & n.exc 13 sqm secured with nails or brads complete all as spd and directed

Dismantling wooden boarding, any description , fixed in any position with nails complete all as specified and directed.

S&F 20mm thick boarding clean sawn as in eaves board fixed with nails complete all as specified and as directed.

S&F 15 mm thick 2nd class soft wood clean sawn boards or planks, width n.exc. 25cm as in wall boarding complete all as specified and directed.

S & F 18/19 mm thick preliminated particle interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screwed to timber frame work as in shelves in kitchen, almirah, cup boards complete all as specified and as directed by Engineer-in-Charge.

S & F in repair Hasp and staple 100 mm safety type Aluminium anodised , with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge.

S&F continous (piano) hinges, 30mm wide mild steel bright hinges 30mm with of flap , mild steel bright finished or electrogalvanised

Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair all as specified and as directed.

M&L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete, all as specified and as directed.

M&L for Vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of mortar 1:6 for layig floor finish complete all as specified and as directed

M&L 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection laid in panels complete complete all as specifed and as directed by engineer in Charge.

Supply of 3 mm thick glass dividing strips, width 38 mm and inserted in position conforming to design complete, all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete, all as specified and as directed

M&L for Glazed ceramic coloured/printed tiles 450X 350X 7mm thick as in vertical surfaces such as dado, skirting set jointed in neat cement slurry including pointed in white or coloured cement to match over and including 10 mm thick screed bed in cement mortar 1:4 complete, all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar

M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thcik screed bed or bedding layer in CM 1:3 complete all as specified and directed.

Taking out UNSV storage water tank of capacity 1000 Ltrs all as per specification and directed by Engr in Charge

Taking out UNSV storage water tank of capacity 500 Ltrs all as per specification and directed by Engr in Charge

S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 1000 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent incl S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia all as specified and as directed

S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 500 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent including fitting ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia all as specified and as directed

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia all as specified and as directed

S&F ball in repair valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia all as specified and as directed

Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit.

S&F Tubes, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors

Taking up or down steel tubing 20 mm dia and connections and stacking neatly for offering credit.

S&F Tubes, medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors

M&L for removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed by Engr-in-charge.

M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil

M&L for lagging to pipes of internal dia 20 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil

S&F in repair 15 mm dia bib taps, cast copper alloy wth crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm dia and confirming to IS-781-1977 , complete all as specified

M&L PBS roll 20 mtr long and 100 cm wide type-III weight 40 Kg per roll (As per sample) complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) not exc 1.5 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed by Engr-in-charge

Taking down chowkat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed by Engr-in-charge

Taking down shutters of any description n.exc 1 sqm each, complete all as specified and as directed by Engr-in-charge

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each, complete all as specified and as directed by Engr-in-charge

S&F 2nd class soft wood plain, solid chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete, all as specified and as directed.

S&F 35 mm thick 2nd class soft wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a) complete all as specified and as directed .

S&F 30 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (b) complete all as specified and as directed .

M & L PCC 1:2:4 type B1 using 20 mm graded aggregates as in Hold fast blocks rungs etc including necessary form work complete all as specified and directed by Engineer-in charge

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specfied and as directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing

S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm complete, all as specified and as directed

S&F butt hinges, medium weight cold rolled, mild steel of size 75 mm complete, all as specified and as directed

S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified

S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified

S&F 150 mm aluminum alloy handles, fabricated type, anodised complete all as specifed

S&F 100 mm aluminum alloy handles, fabricated type, anodised complete all as specifed

S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixin glips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed incl S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete, all as specified and as directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete, all as specified and as directed

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete, all as specified and as directed.

M&L for preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water etc.

M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:6,even and smooth w/o using extra cement .

M&L for Rendering 10mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:4,even and smooth w/o using extra cement .

Supply only liquid integral water proofing compound.

M & L preparation of new plastered surface and applying two coat of cement base paint of approved tint/ colour on wall including cornices, pilasters over a coat of primer as directed by Engr-in-Charge and all as specified

M & L preparation of new plastered surface and applying applying two coat of distemper oil emulsion, white or tinted over a coat of primer as directed by the Engr in Charge.

S & F in replacement curtain rod 20 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and directed by Engineer-in-Charge. Note:- The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.

S & F in repair aluminium channel with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed by Engineer-in-Charge.

Dimantling pipes of any desc.fixed to wall or laid under floor

S&F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 110mm as in rain water pipe

S&F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 75mm

S&F PVC SWR branch piece single equal or unequal 110mm

PVC SWR branch piece single equal or unequal75mm

S&F PVC(SWR) bends any radius 110mm.

S&F PVC(SWR) bends any radius 75mm.

S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and conneting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm

S&F in repair Vitreous china wash down water closet white orissa pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) incl. P or S trap comp all as specified and FIXED IN REPAIR

S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete fixed in repairs

S&F in repair wash hand basin vitreous china size 550x400mm white flat back including CP pillar tap heavy duty as approved by GE ,waste,chain plug,pvc connection, pvc waste pipe comp all as specified fixed in repair

S&F in repair CP Mixer single lever basin mixer fancy type for WHB / Sink with double action for hot/Cold water complete all as specified and as directed.

S&F PVC connection of PTMT nuts 15x600mm long fixed in repair.

S&F PVC connection of PTMT nuts 15x450mm long fixed in repair.

S&F in repairs PVC flushing cisterns 10 ltrs capacity including flushing pipe and connections complete

Taking down aluminum windows including frame if required and repair the same including repair of rubber bidding,aluminum clip,adjusment of glasses,repair of floor spring or hydraulic door closer with oiling or greesing etc.ajusment of horizontal, vertical or middle style . complete all as till the satisfaction of Engr-in-charge.

S&F Waste pipe 32mm for WHB with coupling fixed in repairs.

S&F Waste pipe 40 mm for SINK with coupling fixed in repairs.

Dismantling wrought iron or mild steel work of any description not other wise provided, Complete all as specified and directed.

S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height all as directed by Engr in charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc500 ltr and n exc 1000 ltrs)including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height all as directed by Engr in charge.

S&F in repair PVC lid for water storage tank of capacity 500 Ltrs of approved make complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC lid for water storage tank of capacity 1000 Ltrs of approved make complete all as specified and directed by Engineer-in-Charge.

M/S Ghulam Mohammad Shalla

M/S KABIR CHOUDHARY

M/S MUSHTAQ AHMAD BHAT

M/S ATTAR BUILDERS

M/S Gh Qadir

M/S SHAH CONSTRUCTION COMPANY