Construction of Gallery and Sports Complex at Noney,Nungba, Tamenglong District, Manipur

Amount

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the

excavated soil and disposal od surplus excavated soil as directed within a lead of 50 m (a) Hard/Dense Soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth consolidating

each deposited layer by ramming andwatering, lead upto 50 m and lift upto 1.5 m.

Filling with sandy soil under floors including watering, ramming, consolidating and dressing complete

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in

a).1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 50 mm thick with cement concrete.(a). 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Extra for providing and mixing water proofing materials in cement concrete work in the proportion recommended by manufactures

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand including preparation of ground.

Providing and laying in position specified grade of reinforced cement

concreete excluding the cost of centering, shuttering, finishing and reinforcement -All work upto plinth level

(b).1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforced Cement Concrete work in walls (any thickness) i/c attached pilasters, buttresses, plinth & string

courses, fillets ,Column ,pillars ,abutments ,posts and struts etc.up to floor five level excluding the cost

of centering, shuttering, finishing and reinforcement

(b).1:1.5:3 (1 Cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size).Upto floor five level

Reinforced cement concrete work in suspended floors, roofs, landing,

balconies,shelves,chajjas,lintels,bands,plain windowsill,Staircases and spiral staircase

upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with

(a) 1:1.5:3 (1 Cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Reinforcement for R.C.C. work i/c. bending, binding and placing in position complete.

.a) Thermo-Mechanically Treated bars.

Providing form works i/c centering and shuttering so as to give a rough finish,

strutting and propping etc. height of propping and centering below supporting floor to ceiling

not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in (Using 12mm shuttering ply)

(a).Foundation, footing, bases of columns etc. and mass concrete.

(b).Sides and soffits of beams,beam haunchings,cantilevers girders,bressumers and lintel not exceeding 1 m in depth

(c ).Flat surface such as soffits of suspended floors,roofs landings and the like others floor etc.upto 200mm in thickness

(d ).Columns,pillars,posts and struts(Square,rectangular or polygon in plan)

2nd class (local first class) brick work in foundation and plinth in cement mortar

1:3 (1 cement: 3coarse sand)

Half brick masonry 2nd class (Local first class) in cement mortar

1:3 (1 cement: 3 coarse sand) in superstructure. a).Ground Floor

b).First floor

Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position.a).Local best quality Teak wood

Aluminium glazed windows and ventilators of standard aluminium extrusion section joints mitred and riveted/screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4 mm thick, projecting hinge, handles, peg stays, bolting devices, locking arrangements, spring catch & aluminium clip beading etc as required complete.

Ready made aluminium windows (side hung)

Ready made aluminium ventilators (top hung)

P/F 40 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with Ordinary type) with necessary screws.a).Local best quality Teak wood

Providing & fixing M.S. grills of required pattern to wooden frames of window etc with M.S. flats at required spacing & frames all round bars with round headed bolts & nuts or by screws.a). Ornamental grill.

Providing 40 x 3 mm flat iron hold fast 40 cm long i/c fixing to frames with 10 mm dia bolts nuts & wooden plugs & embedding to cement concrete block 30 x 10 x 15 cm 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal gauge).

Providing & fixing bright finished brass hand drawn hooks & eyes.a).150 mm.

Providing and fixing Brass sliding bolts bright finished or black enamelled with nuts & screws etc. complete. a).300 x 16 mm

Providing & fixing Brass Tower bolts (barrel type) with screws etc. complete a).250 x 10 mm

Providing & fixing Brass handles with necessary screws etc. complete. a).250 mm

Trapzoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, exclding the coat of purlin

& trusses.a).Pre painted Galvanized Iron Sheet (PPGL).i) Profile sheet 0.35 mm/2.8 kgs/sqm

Trapzoidal Pre-painted Profile Sheet for Ridges Gutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer

& capscompleted,exclding the coat of purlins rafter & trusses.a).Pre painted Galvalume Sheet (PPGL). iii) Profile sheet 0.50 mm/4.2 kgs/sqm

Steel work in built up trusses including cutting , hoisting , fitting in position & applying a coat of aproved steel primer red oxide zinc chrome primer conformig to IS : 2074 1979 welded & bolted including special washer etc. complete., excluding the cost of , purlins rafter & trusses.

a).Electric resistant welded welded tube( Conforming to IS : 1611- 1979 )

50 mm. cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4

stone aggregate 20 mm. & down gauge finished with a floating coat of neat cement.

20 mm. thick cement plaster skirting (upto 30 cm. Height) with cement mortar 1:3 (1 cement: 3 coarse sand)

finished with a floating coat of neat cement i/c rounding of junctions with floors..

Providing and fixing 1st quality ceramic glazed wall tiles(colour) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified(Non-skid) Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by

the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Marble stone slab flooring over 20 mm ( average ) thick base of cement mortar 1 : 6 ( 1 cement : 6 coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with

White Marble slab 20mm thick

10 mm thick marble tiles in risers of steps, skirting, dado walls and pillars laid on 10 mm thick base of cement mortar 1:3 ( 1 cement : 3 coarse sand) laid and joined with grey cement slurry including rubbing and polishing complete.

Extra for nosing in marble stone for treads

Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position. a).Local best quality Teak wood :

38mm thick wooden flooring of first class teak wood laid over 25mm thick levelling layer of cement concrete 1:2:4

(1 cement: 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planed, levelled smooth and finished complete.

12 mm cement plaster 1:3 (1 cement:3 fine sand).

15 mm cement plaster 1:3 (1 cement:3Fine sand).

15 mm cement plaster 1:3 (1 cement:3fine sand) finished with a floating coat of neat cement.

Distempering (two or more coats) with oil bound washable distemper of

approved quality on new work I/c priming coat to give an even shade.

Finishing walls with weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying one coat of cement primer of approved quality on wall surface.

Providing and applying plaster of paris of 2mm thickness over plastered surface to prepare the surafce even and smooth complete.

Applying ready mixed priming coat pink primer of approved quality on wood work

Painting two coats (excluding priming coat) with chocolate, red, grey of buff paint approved quality on new steel or wood work.

SH:Land Development

Excavation in hill Area in soil by mechanical means including cutting and treming of sides slops and disposing of excavated earth with all lift and lead upto 50 m.

K.S. Ngaranmi