Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹33.4 L
EMD Value
₹66,731
Closing Date
10 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Garrison Engineer Gaya
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
PROVN OF FOUR HIGH MAST LIGHTS AT CERTAIN LOC AT OTA GAYA UNDER GE GAYA
2026_MES_799495_1
8060/A/GE/26-27/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
OTA Gaya
Please ref tender documents
7 documents required · 7 mandatory
₹500
GE Gaya
₹66,731
19 Nov 2026
19 Nov 2026
14 Dec 2026
19 Nov 2026
10 Dec 2026
3 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S & F 30 Meter high mast suitable for 47m/sec wind speed along with head frame, luminaires carriage 9 ARM suitable for 9 luminaires in symmetrical arrangement at different angle for appropriate illumination and other accessories manufactured in factory complete as per standard with raising lowering system comprising double drum winch ,5mm diameter SS wire rope as per required length and standard ,trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial, foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template, LED type single dome aviation obstruction light including Construction of shallow foundation with M20 grade concrete for the high mast considering the safe soil bearing capacity at site as 10T/sqmtr at 2 metred depth with panel suitable for fwd/rev op of motor and to operate light automatically through timer all materials and labour complete with grouting and connection all as specified and directed. | 4 | Each | - | - |
| 2 | Supply,laying,testing,commssioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, Cross-sectional area 25 sq. mm X 4 core complete all as specified and directed. | 400 | RM | - | - |
| 3 | M & L for wiring from panel to lights and aviation lights complete with copper wire FRLSH of size 2.5 sqmm having 2 run of 2.5 sqmm and 1 run of 2.5 sqmm as earth with standard colour coding a per IS measure as one running meter all as specified and directed. | 150 | RM | - | - |
| 4 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and not exc 1.5m in depth and getting in hard/dense soil complete all as specified and directed. | 63 | Cum | - | - |
| 5 | Returning filling in with approved excavated soil including spreading levelling watering and well ramming in layers not exceeding 25cm thick, complete, all as specified and directed. | 36 | Cum | - | - |
| 6 | Removing of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. | 26 | Cum | - | - |
| 7 | Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed. | 2.2 | Per 1000 Nos | - | - |
| 8 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. | 22 | Cum | - | - |
| 9 | Supply,laying and in replacement galvanised steel tubing light grade complete with all fitting of size 40 mm dia for cable protection along with pole across road etc. Complete all as specified and directed. | 13 | RM | - | - |
| 10 | Supply, installation, testing and commissioning of 1000 Watt LED Outdoor Flood Light, suitable for high-mast and large-area outdoor illumination. The flood light shall be of heavy-duty construction with a corrosion-resistant aluminium housing and efficient heat dissipation system, suitable for continuous outdoor operation under varying weather conditions. The luminaire shall be equipped with high-efficiency LED modules and a reliable potted LED driver, providing high-intensity, uniform and glare-controlled illumination. The flood light shall have a minimum IP66 ingress protection rating, suitable for protection against dust and water jets. The fitting shall be suitable for operation on 230V AC, 50 Hz supply, with surge protection and electrical safety protections. The fixture shall be provided with a suitable adjustable mounting arrangement for high-mast installation and shall be capable of withstanding outdoor environmental conditions. The supplied flood light shall comply with applicable BIS/IEC standards and relevant electrical safety requirements and shall be supplied complete with all necessary accessories for proper installation and commissioning, Adjustable high-mast mounting arrangement. Complete all as specified and directed . | 36 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.35 MB
8061Tenderdocuments.pdf
Tender Documents • 0.95 MB
BOQ_897002.xls
BOQ • 0.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .