PROVN OF ISOLATION CABIN FOR COVID-19 IN BLDG NO P-12, P-13 AND LABORATORY UNDER 185 MH AND CERTAIN REVENUE WORKS AT UDAIPUR MIL STN

Amount

Supply & Fixing Aluminium powder coated door, window, ventilator frame or framework for aluminium partion with one or more rebates and shutter sliding or casement windows as reqd. including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed by Engr-in-charge. Note- (i) Aluminium section shall be of Make “Jindal/Hindalco / Indalco”. (ii) Thickness of powder coating shall not be less than 50 micron.

Supply & Fixing Sheet glass 5.5mm thick, ordinary quality & glazing with Rubber Beading, fixed to aluminium frame work and aluminium doors in square but exc 0.5 sq.m in each pane, complete all as specified and directed by Engr-in-charge.

Supply & Fixing for 12 mm thick Aluminium composite panel fixed in aluminium frame work fixed with necessary fixing arrangement complete all as specified and directed by Engr-in-charge.

Supply & Fixing mortice Lock with all fittings for aluminium door (Make: Godrej/Hardwyn/Sandhu)

Supply & Fixing aluminium handle size & shape as per existing handle for aluminium door or 200 mm long etc. all as directed.

Material & Labour Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:6) finished even & smooth (without using extra lime or cement) including taking down cement or cement lime plaster, any description including raking out joints, hacking for key, scrubbing down with water, etc.

Applying two coats of Distemper oil emulsion over 2mm thick wall care putty, white or tinted on new wall surface to match the existing surface including preparation of surface complete all as specified and directed by Engr-in-charge.

Applying one coats of Distemper oil emulsion, white or tinted on old wall surface including preparation of surface complete all as specified and directed by Engr-in-charge.

Supply & fixing in repairs stainless steel type certain rod 22 to 25mm dia fixed to wall or Aluminium framework as per sample approved complete all as specified.

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample approved complete all as specified and directed by Engr-in-charge.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in Hard Rock, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface, complete all as specified and directed by Engr-in-charge.

Material & Labour Plain Cement Concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundations, filling and mass-concrete complete all as specified and directed by Engr-in-charge.

Supply & Fixing Roof trusses / Hollow section (Square or rectangular in shape) (framed), trussed purlins crane gantries, railSupply & Fixingastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O complete all as speified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour, having 550 Mpa tensile strength as in roof covering /cladding and fixed self tapping screws, complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour, having 550 Mpa tensile strength as in roof covering /cladding and fixed self tapping screws, complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

Material & Labour PCC in roof kerbs or mud stops, rounded or chamfered on edges type B1 (1:2:4) using 20 mm graded aggregate

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.

Materila and labour for Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

Materila and labour for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub Base etc. complete all as specified and directed.

Supply and Fixing for Machine pressed Rubber Moulded precast coloured conctete interlocking paver block with grey cement and no pigment of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over and including 50mm thick screed bedding layer of sand, complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by engineer in charge.

Material & Labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified (Make of cable: Kalinga/Havells/Anchor) for One light point / Fan/ bell point controlled by one switch.

(a) One light point controlled by one 5 Amps switch

(b) One Fan point controlled by one 5 Amps switch

(c ) One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size

(d ) One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size.

Supply & Fixing switch piano flush type single pole one way 5/6 Amps. Make : Anchor / Leader/ Kinjal.

Supply & Fixing socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one Make : Anchor / Leader /Kinjal

Supply & Fixing socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply & Fixing ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Make : Anchor / Leader / Kinjal

Fixing LED integrated batten tube light fittings 20/22 Watt 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.Note : Lights are issued under Sch "B"

Material & Labour MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 4 way including dismantling old one. Make : Havells / Legrand / Schneider/ Standard

Material & Labour MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 8 way including dismantling old one. Make : Havells / Legrand / Schneider/ Standard

Supply & Fixing MCB SPN 230 Volts 40 Amps. Make : Havells/Legrand/Standard/ C&S

Supply & Fixing MCB SP 230 Volts 6- 32 Amps. Make : Havells/Legrand/Standard/ C&S

Supply & Fixing wall mounting fans AC single phase 230/240Volts of size 250/300 mm sweep with louver and complete accessorie all as specified and directed by Engr-in-charge.

Supply & Fixing Submain wiring alongwith earth wire with the following sizes of 2x 4.0 sqmm + 1.25 sqm FR PVC insulated copper conductor, single core cable in surface/recessed as required.

Supply and LayTubes Medium Grade,galvanlised with all fitting laid in trenches of dia 80 mm. Note:-i) Rates to be deemed including joint of GI tubing with screwed socket joints,together with all fittings (such as bends,elbows,tees,short pieces,connectors,back nuts,diminishing pieces,caps,plugs and unions,etc)and fixing complete with clips etc.

Supply and fix fully automatic star delta starter with sheet steel enclosure suitable for -7.5 HP submersible motor in existing location including making connection with PVC insulated 1100 volts grade ,single core , multistranded copper conductor 4 of size 10.0 sq mm ,all as directed and specified .

Supply and fixing in position cast iron non return valve of size 80 mm internally screwed ISI marked.

Supply, installation and testing of Submersible pump, electric driven 415 V, TP suitable for 150 mm dia bore well ( Casing pipe size 150 mm) 7.5HP 10 Stage Pump all as specified and directed.

L AND J CONSTRUCTION CO.