Restoration and renovation works for lab room no. 123, 158 and 213 in college of Post Harvest building at SVPAU T Meerut

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

12 mm thick cement plaster 1:6

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - incharge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm

Providing and fixing 18 mm thick Granite Stone on top.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick

P/Laying of 3 mm thick Antistetic Epoxy Flooring in lab

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

S/Fixing of Aliminium Section doors & Partitions using 5 mm float glass & 12 mm thick preleminate partical board as per Engineer-in-charge.

P/F of Blinds curtain with accessories complete for existing window

Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings Size 600x450x200 mm

P/Fixing of CPVC pipe line 20 mm for Sink in Lab

P/Fixing of CPVC pipe line 25 mm for Lab

P/Fixing of PVC pipe line 75 mm for Sink in Lab

Providing and fixing of CP brass Bib cock long body

P/F of PVC waste pipe 40 mm dia

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Painting of oil bound distemper on walls in 2 coat

Painting of wooden and steel surface with enemal paint in two coats

Providing and fixing 18 mm thick HDMR with both side balancing lamination factory pressed BWP grade ply as per IS 710 of approved brand xes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (a) 1 or 2 Module (75 mmX75 mm)

(b) 6 Module (200 mmX75 mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

(b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 5 to 32 Amp. Single pole

(b) 63 Amp. Four pole

P/F of 300 mm sweep Exhaust Fan, Single Phase AC 220-240 V, 1300 -1400 RPM, copper winding motor, Hevells, Crompton, Orient Make

GST charges extra as per applicable

Please Enable Macros to View BoQ information