OT02

Amount

Supply of Internal spares for Hydraulic Axial Piston Pump SP-180 for Bucket Wheel of Stacker cum Reclaimer Machine Designation SP 180 SR-V, EP 2480847 Part No, R939063699 HD No. 478 3244-687 Make: Hagglunds

Cylinder Barrel Assembly

Piston Slipper Pad Assembly

Retaining Plate

Retaining Sleeve

Control Plate (Port Plate)

Creep Plate (Sliding Disc)

Main Shaft Bearing, Rear Shaft Bearing, Shell Bearing

Coil for Proportional Valve

Seal kit Complete

Supply of Internal spares for Hydraulic Axial Piston Pump SP-40 for Slewing System of Stacker cum Reclaimer Machine Designation SP 40 SR-V, EP 2433980 S No.: 32324558, Part No, 577 6211 - 249 Make : Hagglunds

Cylinder Barrel Assembly

Piston Slipper Pad Assembly

Retaining Plate

Retaining Sleeve

Control Plate (Port Plate)

Creep Plate (Sliding Disc)

Main Shaft Bearing, Rear Shaft Bearing, Shell Bearing

Coil for Proportional Valve

Seal kit Complete

Charges for Loading and unloading of complete pump assembly to the outside workshop and back to MTPS-II Site after overhauling work (Crane and Lorry will be at Contractor scope)

Charges for disassembling the defective SP-180 / SP-40 Axial piston type pumps by removing of all internal components like Port block, valve block, (Charge Pressure Relief Valve, Flushing valve, Crossover Relief Valve, Bypass valve, check valve, control pressure valves) shuttle block, stoker assembly, control valve assembly, port plate, face plate, creep plate, slipper retainer plate, piston assembly, bearings etc. including cost of consumables and T&P etc.

Charges for reassembling pump with replacement of the worn-out internals like Cylinder Barrel Assembly, Piston Slipper pad Assembly, Retaining Plate, Sleeve, Control Plate (Port Plate), Creep Plate (Sliding Disc), Main Shaft Bearing, Rear Shaft Bearing, Shell Bearing, Coil for Proportional Valve and complete seals kits, O- rings and gaskets of the SP-180 / SP-40 axial piston pumps including cost of consumables and T&P etc.

Charges for reassembling the hydraulic pump SP-180 / SP 40 including all the sub-assemblies like port block, valve block, (Charge Pressure Relief Valve, Flushing valve, Crossover Relief Valve, Bypass valve, check valve, control pressure valves) shuttle block, stoker assembly, control valve assembly, port plate, face plate, creep plate, slipper retainer plate, piston assembly, bearings etc. including cost of consumables and T&P etc.

Charges for disassembly and removal of entire internal parts such as shaft sealing, retainer ring bearing shaft, seal kit etc. in the charge pump (gear type) including cost of consumables and T&P etc.

Charges for cleaning by using kerosene, inspection of all the internal parts and pump housing unit, checking the clearance of charge pump (gear type) and reassembling the charge pump (gear type) including cost of consumables and T&P etc.

Charges for Hydraulic pump testing including pressure test-pressure test at different flow, Flow test-Flow at full speed of hydraulic pump to check internal leakages by using flow meter by recording & analyzing, Internal leak - Internal leak at various working pressure by using flow meter & recording by value for various test carried out in the test bench etc., in the presence of TNPGCL Engineer(s) including cost of consumables and T&P etc.,

Charges for reinstallation and commissioning of the overhauled pump in the slew & bucket wheel power packs of Stacker cum Reclaimer Machine-I/II and to arrange for trial run of the pumps in the existing system for checking the performance of pumps in all aspects as directed by TNPGCL Engineer(s) including cost of consumables and T&P etc.

VEE AR SEALING SYSTEMS (BID ID -1335209)