SPECIAL REPAIRS TO BLDG NO.T-13 (SINGLE LIVING BARRACK) OF NCC, T-2 (MI ROOM) AND T-4 OF MH AT AURANGANBAD UNDER GE(S) AHMEDNAGAR

Amount

Dismantling of single layer mangalore pattern or similar tiles in roofing complete all as specified and directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws as specified colour and design as approved by GE complete all as specified and directed.

Dismantling cast iron/wrought iron or mild steel work of any description not otherwise provided for etc completed all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed.

Roof truss (Framed) trussed, Purlines,plates, crane gantries, rails and fastenings and heavy bracket framing (Beam,Tee, Angle, channel or flat sections) including distance pieces cleats etc. (Fe 410-W (Gde-E- 250) quality complete all as specified and directed.

2nd class hard wood clean sawn, scantling as in rafters, purlins, posts etc complete all as specified and directed.

Preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old or previously treated steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of old or previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in Cement mortar/ Cement lime mortar including all quoins, arches, pillars,etc complete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan in CM (1:6) complete but except bricks all as specified and directed

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

15 mm thick rendering in CM 1:4 on stone masonary surfaces or other than fair faces of brick surface/ concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface finished even and smooth with sagol finish without using extra cement complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint including primer of alkali resistant primary paint etc complete all as specified and directed.

Preparation old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening complete all as specified and directed.

Preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed.

Dismantling of stone slabs and tiles of any description and thickness in floors, aprons etc laid, bedded and pointed in any mortor etc complete all as specified and directed.

Machine cut kota stone flooring 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer CM 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror/ granite finish polishing including removing dust complete all as specified and directed.

All as per ser item no. 24 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site including10 mm thick backing coat of plaster in cm (1:4) complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and any position not otherwise specifically provided for complete all as specified and directed.

Cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate, 75 mm thick as in plinth protection including finishing the surface fair and even laid in alternate bays system, length of each bay n exc 1.5 mtr, including forming 12mm wide and 50 mm deep joint, filled with mastic filling to the full depth comprising mixture of one part heated blown bitumen of 85/25 penetration and two parts sand by (volume) complete all as specified and directed

25 mm thick PCC 1:2:4, type B-0 using 12.50mmgraded aggregate as in base/sub base of flooring etc complete all as specified and as directed.

PCC 1:2:4, type B1 using 20 mm graded aggregate as in coping, lintels and bed blocks including form work etc complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.)or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

Anodized aluminum snap grid frame work for false ceiling, including supporting hangers for securing frame work to ceiling & to snap grid, size of grid 605 x 605 mm etc complete all as specified and directed.

9 mm thick premium quality laminated PVC tiles 600 mm x 600 mm in ceiling fixed with screws as per manufactures instruction complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm & n.exc 4.00 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.

Factory made steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed.

Factory made steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay complete without glazing bars with & including fixing flat iron for securing wire mesh complete all as specified and directed.

Mild steel framed guard bars conforming to Fe-290-0 or Fe-330-0 welded to steel ventilators & window complete all as specified & directed.

Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004 and complete all as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specifications & drawing complete all as directed.

Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including 5.50 mm thick plain sheet glass and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21, 100 mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Sheet glass ordinary quality & glazing with oil putty in squares nexc 0.50 sqm each pane using 3 mm thick plain sheet glass etc complete all as specified and directed.

Stainless steel tower bolt 150 mm long for doors including fixed with screws complete and as directed.

Stainless steel sliding door bolt, 300mm long with locking arrangement for doors including fixed with screws complete and as directed.

Mild steel butt hinges of size 100 mm, ISI marked, heavy weight, cold rolled , fixed complete all as specified and directed.

Stainless steel handles 125 mm long for doors, fixed with screws complete all as specified and directed.

Factory made steel windows or ventilators , fixed type with glazing bars etc complete all as specified and directed.

15 mm bore, galvanised iron tubing, medium grade, ISI marked, complete with all necessary fittings and fixed complete, concealed in walls or laid in floors as in repairs complete all as specified and directed.

1000 ltrs capacity rotational mounded polythene water storage tanks (cylindrical vertical covered with lid on top)ISI marked, hoisted and fixed in position as in repairs, complete all as specified and directed.

15 mm bore bib tap, cast copper alloy, chromium plated, with crutch or butter handle, screwed down screwed for iron pipe or for brass ferrule,fixed in repairs complete all as specified and directed.

15 mm bore pillar taps, cast copper alloy, chromium plated with capstain heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or Cold with long screwed shanks and fly-nuts, screwed for iron pipe, fixed in repairs complete all as specified and directed.

Stop valves 15 mm bore, cast copper alloy, chromium plated, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

PVC connection 15mm bore, 450 mm long inculding brass check nuts at both ends screwed for iron pipe fixed in repairs complete all as directed.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors, as in repairs, complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors, as in repairs, complete all as specified and directed.

PVC (SWR) bends any radius with access door of 110 mm bore, fixed in repairs complete all as specified and directed.

PVC (SWR) 110 mm bore vent cowl fixed in repairs, complete all as specified and directed.

PVC (SWR) floor trap 75 mm bore, plain with grating including, jointing with solvent cement fixed in repair complete all as specified and directed.

PVC (SWR) gully trap,125/110 mm plain with grating setting , jointing with solvent cement, fixed in repair complete all as specified and directed.

Soap dish, cast copper alloy, Chromium plated as approved by GE fixed in repairs with chromium plated brass screws complete all as specified and directed.

Aluminium anodised tubular towel rail , 20 mm dia , D type, 60c m long between flanges, fixed in repairs complete all as specified and directed.

PVC waste pipe 32 mm bore PVC flexible with plastic check nut for WHB and Sinks, fixed in repairs complete all as specified and directed.

Vitreous China wash hand basin White of 550 mm x 400 mm size flat back including cutting for and pinning in ends of brackets, including waste coupling CP and waste / vent pipe and brackets but excluding taps, fixed in repairs complete all as specified & directed.

Water closets, Vitreous China, Orissa Pattern of size 580 x 440 mm, with white integral foot rest including cast iron `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc, fixed in repairs complete all as specified & directed.

10 ltr capacity PVC coloured flushing cistern high/low including ball valve, bracket inlet, outlet PVC pipe, fixed in repairs, complete all as specified and directed.

20 mm dia aluminium power coated curtain rods including necessary brackectd fixed with screws complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Glazed ceramic tiles (plain or printed) of each tile of size exceeding 0.11 Sqm but not exceeding 0.18 sqm, 7 mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster backing in CM 1:4 complete all as specified and directed.

Vitrified ceramic light shade tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as in floors laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface completed all as specified and directed.

Glazed ceramic coloured tiles 300 mm x 200 mm x 6 to 7 mm thick, as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster backing in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface completed all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc complete as specified & directed.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards or wooden boards with sunmica top for mounting switches, sockets, fan regulators, accessories etc complete all as specified and directed for One light point and one fan point controlled by one, one way swtich. Make of wire- HPL/Polycab/Havells/Standard./Anchor (Switches, sockets, fan regulators and other accessories shall be measured and paid for separately).

All as per serial item No. 73 here-in-before but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed.

All as per serial item No. 73 here-in-before but one 5 Amp 5 pin socket outlet point on independent board including earth wire complete all as specified and directed.

All as per item No-73 here-in-before but with 4.0 sqmm coper conductor for socket outlet 15 Amp alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly

Switch piano flush button 5 Amp, single pole, one way, 230 volts, ISI marked, white finish, fixed complete all as specified & directed. Make - Havells / Leader /Vinay/ Anchor.

Socket outlet flush type 5 pin 5 Amp multipurpose, 230 volts, single pole one way, ISI marked, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish, fixed complete all as specified & directed. Make - Make - Havells / Leader /Vinay/ Anchor.

Socket outlet 2 in 1, 3 pin, 5 pin, 5/15 Amps, flush type, ISI marked fixed complete all as specified & directed. Make - Make - Havells / Leader /Vinay/ Anchor.

Switch piano flush button 15 Amp, single pole, one way, 230 volts, ISI marked, white finish, fixed complete all as specified & directed. Make - Havells / Leader /Vinay/ Anchor.

High efficiency LED 20W aluminium linear batten type complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete fixed in replacement, Make : Havells, Bajaj, Philips

Lamp holder,Angle/BattenType PVC/Polycarbonate type with back plate suitable for batten fittings with cord grip cap including 10 W LED bulb complete all as specified and directed. Make -Havells / Leader /Vinay/ Anchor.

MCB DP, 63 Amps, 230 volts, fixed in replacement, complete all as specified and diercted. Make- HPL/Standard/ L&T/Schieder/Legrand

MCB DP, 63 Amps, 230 volts, fixed in replacement, complete all as specified and diercted. Make- HPL/Standard/ L&T/Schieder/Legrand

Ceiling rose surface PVC 65x50 mm dia 3 terminals including PVC mounting block, white/ivory finish fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts, fixed in replacement complete all as specified and diercted.Make- HPL/Standard/ L&T/Schieder/Legrand

Electronic fan Regulators 5 Step, Socket Type,450 W, 250 Volts flush type on the exiting phenolic laminated sheet etc. as required fixed in replacement complete all as specified and diercted. Make - Havells / Leader /Vinay/ Anchor.

1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with an inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm dia GI suspension wire one twine core flat or circular stranded conductor of size 10 Sqmm complete all as specified and directed.

Sheet metal enclosures with plug and socket, single pole and neutral with two pin and earth plug and with and including one MCB of 20 Amps (SP), fixed in replacement complete all as specified and directed. Make-Havells/ Standard/ Legrand/ Schenider/HPL

Submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100 Volts grade PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals, as in repairs complete all as specified & directed.

Ceiling fan 1200 mm sweep complete with all accessories clamp, blades, down rod, canopy and making connection with suitable size and length of flexible copper conductor cable complete all as specified and directed. Make : Havells/CG/Bajaj

Earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick, buried directly in ground earth pit not less than 2.25 meter in depth with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanized iron wire 4 mm dia earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron as required, including watering arrangement with 20 mm bore medium grade GI tubing, funnel and wire mesh, PCC chamber with CI frame and cover , necessary excavation, returning filling and removal of surplus soil, filling of charcoal and salt in alternate layer complete all as shown in plate No 5 of MES Schedule Part I including testing complete all as specified and directed.

M/s.M G Kulkarni

sonu enterprises

M/S. M.A. Sharief engineers and contractors