Stainless steel (S.S.) Socket head cap screw (M6X40) ISO 4017, IS :1364 (Part- 2)/2023, A2-70 to IS 1367 (PT-14) Sec-1/2023, CE with stainless steel (S.S.) nut (M6) DIN : 982, IS 7002/2018 Rev-3, A2-70 to IS : 1367 (Part-14) and stainless steel (S.S.) plain washer (F6.6) IS : 2016/2067 Rev-1 Amndt-4, TY-A, TAB-1.

Special Eligibility Criteria

1. 1

   Bulk quantity order(s), constituting Minimum 80% of the Net Procurable quantity (NPQ), against the tender shall be placed on the manufacturers or its authorized agents who have successfully supplied either "a) Minimum 20% of the overall tendered quantity of the NIT against any single order. Or b) Minimum 30% of the overall tendered quantity of the NIT, against multiple orders, on cumulative basis." Of the tendered item or its variant to Zonal Railways/PUs/CORE/PSUs/Other Central Govt. Department/Metro Railway, in last three financial year and current financial year up to the date of tender opening. (Note : Please also refer the other conditions related with implementation and applicability of eligibility criteria that are mentioned in Para 1.1 of general conditions of tender in section-II of NWR tender condition(SBD)).

   Document optional
2. 2

   In case the manufacturer or OEM of authorized agent is approved vendor for bulk order by any PU (ICF/RCF/MCF/CLW/DLW/CORE/DMW etc) or RDSO for the tendered item, the firm shall be eligible for bulk, regular or entire quantity order. However, the firm must upload the copy of their valid document of approval for the tendered item along with their offer.

   Document optional
3. 3

   Development quantity order up to 20% of NPQ may be placed on manufacturers or their authorized agent who do not comply with condition mentioned in Para1.1.1 and 1.1.2 but demonstrate their capacity cum capability to manufacturer/supply the tendered item. For this purpose, they must upload necessary documents such as past performance for having supplied similar item to any Central Govt. unit/PSU/Public Limited Company or registration with NSIC/Udyam/Zonal Railway as manufacturer that covers the tendered item or proof of development vendor in any PU(ICF/RCF/MCF/CLW/DLW/CORE/DMW etc)/RDSO list for the tendered item. (Note : Please also refer the other conditions related with implementation and applicability of eligibility criteria that are mentioned in Para 1.1 of general conditions of tender in section-II of NWR tender condition(SBD)).

   Document optional
4. 4

   In case tenderers participate as an authorized agent, then the performance as required above shall be that of the Principal, authorizing the agent. It may so happen that the agent has credentials of past supply for a different Principal but this will not be considered as performance for placing bulk order in case of change of Principal.

   Document optional
5. 5

   Firm who are traders/authorized agents, are requested to indicate name and address of manufacturer works and submit the TENDER SPECIFIC AUTHORIZATION letter from their manufacturer on their letterhead along with the tender. Non-submission of valid OEM TENDER SPECIFIC AUTHORIZATION letter will make their offer invalid and offer will be summarily rejected.

   Document optional
6. 6

   EMD condition: Bidders are requested to comply the requirement as per para 3 of NWR tender condition (SBD) for Earnest Money Deposit (EMD) falling which offer shall be summarily rejected. Bidders are seeking Waiver or exemption from payment of EMD shall have to attach scanned copy of the requisite document evidence in support of their claim. All bidder who are exempted to submit EMD as per Clause 3.1.1 of Section-I of NWR Tender document, are required to sign Bid Security Declaration as mentioned in clause 3.1.5. Submission of offer by such exempted bidders will be considered that they have signed the above bid security declaration. Bidders who are not exempted to submit EMD and bidders who are under disqualification for EMD exemption as on date of tender opening, are mandatorily required to submit EMD (online) as mentioned in Tender NIT. (Note: Please refer Para 4 in section-I of NWR tender condition (SBD) for applicability of MSE benefits).

   Document optional

Commercial-Compliance

1. 1

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   INSPECTION CLAUSE : Inspection by CONSIGNEE up to PO value Rs. 5 lakhs and above 5 lakhs inspection by TPI (Third Part Inspection) agency shall be applicable. However, if any bidder quotes deviation for inspection clause for PO value below 5 lakhs as TPI (Third Part Inspection) agency instead of CONSIGNEE then same may also be considered but for PO value above 5 lakhs inspection by TPI (Third Party Inspection) agency shall be applicable
2. 2

   Micro and Small Enterprises firms In order to avail themselves of benefits and preferential treatments, the MSEs must be registered with any of the following: - (a) UDYAM (UDYAM Registration Certificate). (b) Udyog Aadhar Memorandum (Note :- Terminal date for consideration of this certificate was till 30.06.2022 or as extended by Ministry of Micro, Small & Medium Enterprises from time to time. Thus this certificate (Udyog Aadhar Memorandum) can only be considered if the above terminal date is further extended beyond 30.06.2022). MSEs registered with above agency/agencies must attach (in the template - "Attach Documents" on "Techno-Commercial Bid Details form", as scanned copy in PDF format) their current & valid registration certificate along with their offer. Other Conditions shall be as per Para 4 of Section-I of NWR tender condition document.

   Document optional
3. 3

   Tenderer should mention in their offer: - 1. Name of manufacture with complete address. 2. Place of inspection be indicated with complete address, option for inspections at godowns/outstation/multiple places be strictly avoided, and preferably be permitted only at manufacturers place.

   Document optional
4. 4

   The onus of uploading of requisite documents for capacity cum capability and past performance etc. along with their e-offer regarding 'Bulk order' or 'Developmental order ' lies with the tenderers. In case the necessary documents are not uploaded by the firm then the offer is liable to be ignored. Onus of submission of requisite documents lies completely with the tenderer only though the purchaser may utilize the Performance Records, if readily available with it for which no claim/dispute, whatsoever, can be raised against the purchaser.

   Document optional

1. 1

   INSPECTION CLAUSE mentioned in tender is responsive condition. Offer with any deviation from INSPECTION CLAUSE mentioned in tender will be SUMMARILY REJECTED.